Maglite LED upgrade
-
I've got the same drop-in for my 2D and like it a lot. It doesn't see that much use these days but it used to be my work torch and got used almost every day. The batteries will last forever, in fact I'm not sure that the set I have in mine have ever been changed.

-
Thanks for the pictures mate

I want to upgrade my 5d mag, but I don't think I'd use it very much.
Looking forward to the beamshots.
-
I fitted my 6D Maglite with a LED as well. This light sees a a fair bit of use, it's so large it is always easy to find. With the LED, the light is just a bright if not brighter and has a very long run time.
I makes a fairly good club as well
-
Now get out your soldering iron and double its output!

-
Dunc, you're very welcome!

-
-
Now get out your soldering iron and double its output!

Not being a torch person particularly what is it you recommend? *** Explain it as if you are speaking to a child that has almost no grasp of electronics at all.***

That way Dunc might be able to get it too. ;)
Im with you on that. I have a two D light that is completely worthless with the standard bulb does that led (made for 4 cells) really work? I would like to get one for the 2 D but only if there is a noticeable difference.
-
Now get out your soldering iron and double its output!

Not being a torch person particularly what is it you recommend? *** Explain it as if you are speaking to a child that has almost no grasp of electronics at all.***

That way Dunc might be able to get it too. ;)
Im with you on that. I have a two D light that is completely worthless with the standard bulb does that led (made for 4 cells) really work? I would like to get one for the 2 D but only if there is a noticeable difference.
I have the 2D insert and it works well, but isn't much brighter than the standard bulb. I use them becuase of the longer run times.

-
Now get out your soldering iron and double its output!

Not being a torch person particularly what is it you recommend? Explain it as if you are speaking to a child that has almost no grasp of electronics at all.

That way Dunc might be able to get it too. ;)
What you do is replace the Luxeon LED with a SSC P4 LED, which is twice are efficient. You start by pull out the Luxeon (test and mark polarity well before). Then pull out the plastic end piece to drop out the board. You'll see on the board two springs the leg on Luxeon fits into. Solder two short copper wires so the end stick outside the can when you put board back in. Stick SSC P4 on the can with thermal compound, solder the wires to the two legs and you are done.
It's the first time I've ever used a solder iron and it worked well. Just remember the board polarity throughout and match it with new LED, or you'll fry the board. You can get both LED and thermal compound from dealextreme.
-
Thanks man, nice and clear.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


