EDC in DEC
-
@Hevy (CT-782) said:
Day 6Ranger is ready to help me with some coffee.

Enviado de meu moto g(6) usando o Tapatalk
SAK and coffee

-
@SirVicaLot said:
I don‘t mind scratches that come through use, but not a fan of stains
The 93mm is thicker at the tip and also further back. For that reason they also have a slightly different curve on the opener blade. At least that‘s what it looks like.
Farmer X then?

-
@Pauldmmwc said:
Hello Day 7
some running repairs to the lawnmower wheel . The tread was coming off so a quick fix with some duct tape and the Wave.
Probably should find some new wheels but this is more fun.

-
Day 7

-
<u>Day 7</u>

Practiced my one hand shuffling, which is disastrous.

And I also been playing with the paracord bracelet I made earlier, I really like the version MeZillch shared on his channel. Most other premade paracord are semi permanent, and it's a real pain to take it apart. But his version is quick and could be resembled quickly if you practice with it enough, approximately 10ft here readily accessible. I know he is a member here, so a big thank you for sharing this method.
https://www.youtube.com/watch?v=2RF4xEohFIQ&ab_channel=MeZillch -
I've made one of those quick release bracelets too!

-
@Sos24 said:
Day 6
Not much use today other than use the Yeoman combo tool to open a protein shake and the serrated blade on the Spirit to cut some plastic rings.

Fisher used his pliers today, so I thought I’d include a picture of that use as well.

Kinda curious if Fisher got to pick his EDC, what would those be?(I'm sure the pliers is one of them) :D
@SirVicaLot said:
Day 6
Used the can opener so separate these two thingies that were glued. Don‘t ask me what they are called, you can put them on furniture legs so the furniture doesn‘t slide

Scissors cut double sided tape

Not even a week in and i already have some observations about my EDC. I chose a cellidor model on purpose, to see if i could go back from the Spirit and Alox models. After 6 days I can tell you already that i can‘t.
In the first picture you can see that the scales are stained. This happened earlier in the week when i was working with leather stain. Would not have happened with Alox or the Spirit.
I already damaged a screw driver because i overestimated the backside tools. I also don‘t like the can opener for Phillips screws (on 91mm) for two reasons: The Handyman is too wide, and since the can opener doesn‘t sit in the middle, it is hard to use as a handle.
Secondly the can opener of the 91mm models is weaker and thinner compared to the 93mm ones, resulting in less grip and more slipping when using it as a screwdriver.Same thought of can opener as philips, I think it's nice to have, but definitely prefer inline philips if I do get the choice.
@Hevy (CT-782) said:
Day 6Ranger is ready to help me with some coffee.

Enviado de meu moto g(6) usando o Tapatalk
Coffee packet!
I kinda miss this convenience, but since I am doing the weight loss challenge now, it's something I have to cut as least for the month... 
@ReamerPunch said:
I've made one of those quick release bracelets too!

-
@McStitchy said:
Lovely little fella you have
Here's Stitchy's "Night Guard" :)
Don't be fooled, he's tougher than he looks, managing all hikes we do.

-

Office day - 1st since late August.
The Wine Master and lucky charm roaring to call it a day..Sent from my iPhone using Tapatalk
-
Another great start to the day, guys!
I'mm curious to see how long those duct tape wheels hold up. Duct tape is surprising stuff.

-
@comis said:
Kinda curious if Fisher got to pick his EDC, what would those be?(I'm sure the pliers is one of them) :DThe pliers would definitely be one. Especially with bullies, if I haven’t put them on and the bully gets short he will bring it to me.
He would also want scissors for cutting tags off toys and opening treats. Knife blade for cutting treats. If the knife isn’t a serrated blade, then a saw, for trimming old end of partially chewed treats. He likes my water bottle with boot as bowl, but at minimum his collapsible bowl for water. Of course poop bags and treats are a necessity.
That would probably be sufficient for edc. But his travel brush might also be included because he likes being brushed if up tight or anxious.
-
Day 7
Decided to switch out my tools. I am aware that this will disqualify me for the badge, but that is ok. My main reason to attend this challenge was to figure out what works for me, so i don‘t see the point continuing with tools that I can already tell are not working.
If that is ok with you folks i will continue to post though to see if the new tools work better.
These two get replaced:

I liked the idea of the Handyman because it has all the tools i want in the smallest package possible. However this is also the biggest flaw.
One thing I ask of my MT‘s is the ability to handle all sorts of screws (especially Philips) without issues. The Handyman was lagging in that regard. The can opener is not mounted close to the middle, making it harder to use. Compared to the Alox tools or 3D Philips drivers it is also too weak. The same goes for the majority of the backside tools, making me not want to use them. Just way too much stuff I dislike to enjoy carrying this tool.On a good note: The pliers performed way better than expected, and I really used them more than i thought

Due to above reasons I decided to switch to the Pioneer and my modified MP400. This gives me plenty of screwdrivers, from the can opener tip, over the 3D Philips on the MP to the awesome flat driver of the Pioneer. The tools still provide pliers, wood saw, metal saw, and file.


Slight adjustments to the bits I carry. Added a #0 Philips (for some reason i grabbed a lot of small philips screws lately
) and moved the micro screwdriver to the bit holder since I lost the corkscrew.
Tools of the MP400 -
@SirVicaLot said:
Day 7Decided to switch out my tools. I am aware that this will disqualify me for the badge, but that is ok. My main reason to attend this challenge was to figure out what works for me, so i don‘t see the point continuing with tools that I can already tell are not working.
If that is ok with you folks i will continue to post though to see if the new tools work better.
These two get replaced:

I liked the idea of the Handyman because it has all the tools i want in the smallest package possible. However this is also the biggest flaw.
One thing I ask of my MT‘s is the ability to handle all sorts of screws (especially Philips) without issues. The Handyman was lagging in that regard. The can opener is not mounted close to the middle, making it harder to use. Compared to the Alox tools or 3D Philips drivers it is also too weak. The same goes for the majority of the backside tools, making me not want to use them. Just way too much stuff I dislike to enjoy carrying this tool.On a good note: The pliers performed way better than expected, and I really used them more than i thought

Due to above reasons I decided to switch to the Pioneer and my modified MP400. This gives me plenty of screwdrivers, from the can opener tip, over the 3D Philips on the MP to the awesome flat driver of the Pioneer. The tools still provide pliers, wood saw, metal saw, and file.


Slight adjustments to the bits I carry. Added a #0 Philips (for some reason i grabbed a lot of small philips screws lately
) and moved the micro screwdriver to the bit holder since I lost the corkscrew.
Tools of the MP400Nice choice of tools Sir Vic
Enviado de meu moto g(6) usando o Tapatalk
-
Today, a coffee before go to the daily chores...
And the Ranger file helped me to make a copy of a window key using a old rusty key with similar profile. And... It worked!
I really love the Victorinox file (and combo tool).
My most loved SAK is the Trail Guide. (But for this challenge I choose the Ranger who is everyday in my backpack)



Enviado de meu moto g(6) usando o Tapatalk
-
-
@SirVicaLot said:
Day 7Decided to switch out my tools. I am aware that this will disqualify me for the badge, but that is ok.
...
... please keep posting with your new setup

-
day 7: started working out again. used the Spirit to open some fresh chalk.
<a href="https://flic.kr/p/2ketVCf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50692034002_b45b66ba4a_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2020-12-07_07-23-17
-
@Hevy (CT-782) said:
Today, a coffee before go to the daily chores...And the Ranger file helped me to make a copy of a window key using a old rusty key with similar profile. And... It worked!
...Nice

-
@styx said:
day 7: started working out again. used the Spirit to open some fresh chalk.<a href="https://flic.kr/p/2ketVCf" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50692034002_b45b66ba4a_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2020-12-07_07-23-17
You've got some balls :o
-
@McStitchy said:
Love the pliers solution for Fisher
Thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
