Wild Man Giveaway!
-
Thank you. It'll be on my hip again today.
-
I had a blast with this one!

-
Hello all. This great thread is not forgotten. I came back to read up and talk a bit about the knife I won. I thought about a new thread but this one also deserves a bump.
I carried the Bushcrafter a lot after getting it. It was sharp but I cannot leave edges alone. All the talk about 3V being difficult didn't prove to be the case for me
. I stropped the smurf out of it as well. It came out amazing and as we say is hair shaving sharp. This is my first experience with CPM3V and I was excited after reading a lot on it. In the first few weeks of owning it I did basic chores with it. We have been getting a lot of items delivered so theres lots of cardboard to break down to fit our receptacle. We also got a few very heavy duty boxes that larger items came in. I understand this knife is an outdoor knife. The grind and design is primarily for Bushcrafting. Yeah yeah yeah. So how'd it do? My go to knife at home has been my Benchmade Contego in S30V. I also use a Esee Izula in 1095 around the house as well. Any knife should be able to cut and while these 3 are very different both my BM and Esee are performers of many tasks. How did my Bushcrafter do? Come on now, it did excellent. I used this knife to break down some crazy heavy duty cardboard and it ate it up. I am not one who "tests" edge retention but I know when my knives cutting has slowed or lessened. CPM3V impressed but that was at home..... how would it do in its environment? More on that later.I love the sheath on this knife. Its sits low but with plenty of handle to grip to remove plus I added a bright orange lanyard. The leather gives great snug retention with a positive feel when removing and replacing. I love leather sheaths. I added a drop loop dangle carry thingy. I like my knives to sit just a bit lower than how sheaths are normally set up. Leather takes on a wonderful look with use and handling. I've carried and handled this sheath a lot and it looks great still. I did treat it to some sno-seal
. Again I cannot leave well enough alone. Nix added a ferro rod which I appreciate. I added a orange lanyard to it. I used paracord to attach my dangle loop to the sheath so I now have a bit of cordage when out and about. It not a pretty set up but its very functional.The handle. WOW its gorgeous. I would not have chosen this color and that would be a real shame since I do really love it. On a side note, after getting this knife and loving the handle color so much I now look at colors I would not give consideration to. I guess I am used to certain handle colors so this is a very pleasant change for me. The handle is very confortable. When getting a new knife I always hold the knife in each hand and in different cutting positions. While I watch TV I hold the knife. I can tell straight away if it is not a good it for me. I am ambidextrous and switch hands quite often when cutting. I am primarily left handed but for some reason I do switch back and forth. Bark River does a great job on their handles. Its smooth and well shaped. The handle thins towards the blade with a very slight flair. There is also a very slight flair at the lanyard tube. My thumb sits nicely when I hold the knife in a certain grip. There is a slight "guard" where my index finger nicely sits. At the back there is a ramp where my little finger snuggles in. I feel the knife fits my hand very well. No negatives on the handle at all.
I was surprised at the size and weight. Not in a bad way mind you. At 8 1/2 inches overall its a good size. The cutting edge is 3 3/4 inches with a handle gripping area of 4 1/8 inches. The balance pint of the knife is at about 3 1/8 from the back of the knife so its handle heavy. You feel its handle heavy upon picking it up. My Old Hickory is very similar in terms of the balance point as is my BM Contego as well as my little KJ Mora. Interesting. The all have about the same gripping area to cutting edge area. Now this is not measured precisely but I do feel each have a similar hand feel in balance.
A little more in a bit.
-
So, not only does it look awesome, it also performs awesome...
You lucky, lucky...
Great write up mate, looking forward to the next one
.
-
I'm really fond of BRK handles, too. (For the most part--I have had a couple that were less than ideal for me. Overall, I think BRK does a great job with their handles though.)

-
Heres a few pics. Hopefully what I've described can be seen in the pictures. I find reading specs vs handling a knife makes a difference. When I read specs I get a basic idea but once the knife is in my hand the data is only data. I initially thought the shorter yet thick blade ( 3.5mm +/- ) would be something I need to adjust to. My go to out door knife is 5 inch blade length and very similar thickness. Its also very different grind and design. It performed differently not better or worse just different.
I like to carry different knives when out. My little Mora is a wonderful knife for all things whittling. It handles well and is so comfortable. I've really taken a liking to this knife. I use my larger knives for all things, larger. We get mixed fire wood. We use pine for kindling and harder wood for the base. I like to use my larger knife to make the kindling. No real hard core batoning just a bit of splitting down. I also like to shave some fat wood. We make pot stands and other random things for fun. I'm no expert bush crafter but using my knives when out is fun and something I enjoy.
My Bushcrafter was finally out in its environment. We got away for a few days so we could recharge and unwind. Let me first say I am so sorry but when out we tend to put our phones away tho I do try to take some pics. This time I failed to do so.
We camped locally with temps at night in low 40s so a fire was nice. I broke down some pine with little effort. No real test what so ever. I decided to try a harder wood. We had seasoned oak. The log as 3 inches in diameter. I centered the blade on the log and gave it a whack. A couple more whacks and I had 2 halves of a log. Easy enough. I split the log in quarters just because. This was not really what I planned on using the knife for tho I know CPM3V is pretty tough stuff.
As we sat around the fire I carved a notch into a 3ft long branch that was about inch or so thick to hold my pot over the hot coals. The knife was pretty comfortable making the notch due to the spine not being crazy sharp. I have some knives with 90 degree spines that are uncomfortable with my thumb on them. This spine did throw sparks from a few ferro rods including the one Nix provided. I'm glad this knifes spine isn't crazy sharp. I don't think super sharp spines are needed.
Just sitting around playing with the knife I wanted to use the tip to create a divot in oak. Again, easy peasy. What I was really looking to see was how comfortable would this knife be for all camp chores. I also wanted to see how well CPM3V edge would last. I did do some work on it so it left the house very sharp. I'll cut to the chase ( see what I did there ). The edge seemed to be exactly the same when I got home. I took the edge to magazine paper and it curled it as I cut it. The feel of it was the same as when we left. I was pretty happy. I decided to give it a strop then cut magazine paper again. I couldn't tell a difference. It very easily cut while curling the paper. A wash in the sink with soap and water and it looks the same as when I received it. Not sure what its gonna take to put some real wear on this knife?
It was very comfortable to use and my partner felt the same. Changing hands using it was no difference in comfort. With gloves, without gloves it was a joy to use. The handles are smooth so I thought it would be slippery. There was no issue at all. I did notice the weight in hand. On my hip it was a joy to carry. Its no slim knife but I like that. I have other knives that I bring that fill the role of carver, food prep, etc.
I would bring this knife as my sole knife. I would not hesitate to push this knife much harder that I did. We bring a good hatchet when we need to bash on wood. We also use wedges to split larger logs. I have no reason to believe this knife could be used but its not how I use my knives.
On food. Flat grinds are always best for food. Thin is better as well. Is this a chefs knife? No, but y'all know I love using all knives on food regardless of what the knife was designed for. My Nimravus has been used for all manner of kitchen prep. Not the best but I make it work. I was happy with the performance of the Bushcrafter on food.
It was a bit windy our so guy lines were tied to keep our tent stable ( I got to use some knots learned on the Nix knot thread ) so I also took the opportunity to cut cordage. Easy. I cut jute, paracord, nylon, and some random yellow plastic stuff. No real "test".
It was comfortable to carry all day. My addition to the sheath was nice when I had a few layers on. It hung a a good lower length. It sure looked awesome too. Theres something to a good looking knife right? It felt good having on my hip too. The bit of weight is always nice for me. My little KJ Mora is so light I forget its there then have to pat my side to make sure. I didn't think about the steel at all. Truth is when out I don't worry much about my blades. I give them a wash and dry and replace in the sheath. When I get home I take a closer look but otherwise I don't worry.
-
Forgot to add some pics. I didn't take any while out
. I leave my phone in my vehicle. The pics are some different angle of the knife.



-
Few more. I'll be getting back out and I will take some pic of it in its natural environment. The last pic is my go to out door knife and the Bushcrafter.



-
@Nix said:
I'm really fond of BRK handles, too. (For the most part--I have had a couple that were less than ideal for me. Overall, I think BRK does a great job with their handles though.)
I have a couple Bark Rivers and so far I've been very happy. This one is a good fit in my hand. I am appreciative of its comfort in a few grips.
-

Great write-up, Aloha!

-
Not only does this knife look amazing its handles amazingly well and that makes for a knife I want to carry and use. I cannot say enough how appreciative I am to have this knife. I feel incredibly fortunate and thankful to you Nix.
I know over the years this will be a knife I carry with me on my outdoor adventures. It will be a knife that my family will recognize more and more. I can see why this was so well received by many. My go to outdoor knife is a bit worried and as well it should be. Its nice they are so different because otherwise it'd be right to be out right scared.
We plan to get up to the mountains after Christmas once our mandatory stay at home orders are lifted. We'll see. I am enjoying carrying it at home using if for any and everything.
-
Great to see it ended up in good hands. 
-
Good write up !

-
Such a beauty of a knife that couldn't have gone to a more deserving member!

-
Thank you for the kind words
. -
One fine day, pfrsantos..... ;)
-
What a lovely thread this is!

-
@ReamerPunch said:
What a lovely thread this is!
And a fun one, too!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


