Combo Edge Cooperative - partial to partially serrated blades
-
-
I think the Vic type with the serrations towards the tip makes a lot of sense because that should give you the best leverage for cutting rope and such and the non serrated rear portion of the blade should give you the most control for cutting a feather stick or sharpening a pencil, etc.. However most knives are the other way around and that is what I learned on and have more of. Absolute best combo edge was on a Schrade CH-7 I had years ago. It would rip through palm fronds (palm fronds are my benchmark) without much effort at all and even out performed some fully serrated blades. If I'd had the sense to buy several of them I'd still be using it but I don't want to risk the one I still have. The worst combo edge or fully serrated for palm fronds are Leatherman blades, but most Leathermans have an excellent saw blade so I just use that instead.
-
I think 1/2 serrated is enough for most tasks and probably the best compromise, but it can go to 3/4 and still be usable. I have a partially serrated rigging knife that is 3/4 serrated and the plain edge is at the tip and on this particular knife I always wish it had less serrations. My solution is to always carry 2 or more knives and use whichever one is best suited to a particular task.
-
-
@Alan K. said:
-
I think the Vic type with the serrations towards the tip makes a lot of sense because that should give you the best leverage for cutting rope and such and the non serrated rear portion of the blade should give you the most control for cutting a feather stick or sharpening a pencil, etc.. However most knives are the other way around and that is what I learned on and have more of. Absolute best combo edge was on a Schrade CH-7 I had years ago. It would rip through palm fronds (palm fronds are my benchmark) without much effort at all and even out performed some fully serrated blades. If I'd had the sense to buy several of them I'd still be using it but I don't want to risk the one I still have. The worst combo edge or fully serrated for palm fronds are Leatherman blades, but most Leathermans have an excellent saw blade so I just use that instead.
-
I think 1/2 serrated is enough for most tasks and probably the best compromise, but it can go to 3/4 and still be usable. I have a partially serrated rigging knife that is 3/4 serrated and the plain edge is at the tip and on this particular knife I always wish it had less serrations. My solution is to always carry 2 or more knives and use whichever one is best suited to a particular task.
The issue I always had with a priori choosing a blade for a particular job... Keeping in mind that doing this sort of work becomes more fun because I get to use a MT... I ever really know which tool is the best one for the job because I did the whole thing with the blade I selected first
Most of the time if it isn't the SAK in my pocket then it's the fully serrated blade on the Wave. The combo edge on the Cold Steel Voyager and the Victorinox have gotten in on the action within the last year too, but the Wave has always been handy... So it gets more use.
Point is... I would never seem to mind that I would have to adjust my grip to use the "common" combo edge for most things.It's also interesting that the combo edge is (almost) always the cheaper option and tends to be people's initial experienced with an EDC. Hopefully the trip down memory lane will make the Combo Edge Cooperative a fun thread.
I tend to think that most of the time a decision that a company makes which seems counterintuitive is really based on focus groups or some other market research.. or some sort of human factors analysis... (to give an example... in surveys and focus groups: commuters overwhelmingly would rather stand than be in the middle of a 3-seater... so new train cars are designed with fewer seats)
Though I could be giving the MT manufacturer more credit than is due.So when a Leatherman Signal, or a Vic OHT which is designed for outdoor recreation have a combo edge
Maybe people who have a preference for a particular blade steel or insist on sharpening their own knives is a remarkably small minority.

-
-
The standard blade on the Skeletool is a combo edge. I got this KBX for the "cool factor" mainly. It's pretty easy to change the grip and choose whichever edge I want to use, especially with this modified Wharncliffe shape.
This sort of knife would be great for backpacking, particularly for people who don't reach for their knife all the time and have deeply ingrained habits. It's sort of a multitool in and of itself.
I think that sometimes, real "users" that know how to keep a razor's edge on their own knives really miss out on some of these "out of the box" gadgets (that is... if you like gadgets). It's true, there are gadgets and there are tools.
But in some circles, a multitool or knife gadget has a similar fun factor as a backpacking stove gadget. Is it easy to cook a full meal on a single burner backpacking stove? No. Are feather sticks made with a KBX going to come out looking professional? No. But sometimes it's more fun.

-
I think that most people will agree that this part serrated blade is not half bad.

-
-
-
Would there be any interest in a Combo Edge Challenge?
A combo of months from February 1 to March 2 would be apropos.Several Leatherman tools, Cold Steel folders, and many others would qualify.
-
-
@Alan K. said:
That might be interesting depending on the rules and requirements of the challenge.
I'm thinking.... Simply.... Carry any multitool or single blade folder for the month as long as it has a combo edge.
Skeletool, Trekker, PST-2.
No fully serrated or plain edge blade allowed.
The inspiration for this challenge comes from Leatherman advertisements that I had been looking at. Leatherman's catch phrase will be something about resourcefulness, and the tool being able to help with any job. Meanwhile, someone is bound to comment that they would prefer a plain edge.
I said to myself... Maybe I would prefer a plain edge too, but... Out of the box, the tool would (or wouldn't) get the job done, edge style notwithstanding.
So the challenge is... To use any one of the perfectly good tools like the Skeletool or Signal or Trekker, and see how you get on with the blade as is.
-
@ElevenBlade said:
I'm thinking.... Simply.... Carry any multitool or single blade folder for the month as long as it has a combo edge.Skeletool, Trekker, PST-2.
No fully serrated or plain edge blade allowed.
The inspiration for this challenge comes from Leatherman advertisements that I had been looking at. Leatherman's catch phrase will be something about resourcefulness, and the tool being able to help with any job. Meanwhile, someone is bound to comment that they would prefer a plain edge.
I said to myself... Maybe I would prefer a plain edge too, but... Out of the box, the tool would (or wouldn't) get the job done, edge style notwithstanding.
So the challenge is... To use any one of the perfectly good tools like the Skeletool or Signal or Trekker, and see how you get on with the blade as is.
Anyone up for this in 2021?
-
-
-
@ezdog said:
This is one of the few pairs of EDC that I have new in box copies of.I have lived with the Delica for a long time and it could easily be my only knife any time.


M

There are a lot of classic EDC knives from the 90s and 2000s (I guess) that can be an "only" knife... Spyderco, Cold Steel....
-
With discussions of 2022 challenges underway I wanted to start drumming up some interest in a Combo Edge Challenge for February/Mar 2022 (what timeframe can be more appropriate?)
There are lots of tools that qualify, and lots of tools that people carry daily without any issue (though often with a secondary plain edge blade)
At this point, I'm thinking of doing the challenge with the Skeletool.
Anyone else interested? It's a long way away, but... might as well start planning early.

-
-
-
I guess I could use the Signal and get its badge, unless this gets its own dedicated one.

-

@Alan K. said:
I would be interested too.

@ReamerPunch said:
I guess I could use the Signal and get its badge, unless this gets its own dedicated one.
That's an idea - if we don't get enough people to get a Combo Edge badge, it makes good sense to use a tool that already has one, like a...
Signal,
Swisstool Spirit (with butter blade),
Leatherman MUT,
Spyderco,
SOG Powerlock
Victorinox Soldier or 111mm
Skeletool
Gerber MP 400
or even the Discontinued MT or Off Brand MT badgesLots of great options

-
Do the serrated blades of the Wave/Surge/Rebar/ST300 count?

Seriously. That tiny plain edge tip of the ST300 serrated blade is just brilliant.
I usually use those for short draw cuts. Nothing too ambitious. But I had to wrap a birthday present, so I did a draw cut of about 50cm, about 1.5 ft. Man, did it knock it out of the park! I kept a steady hand, and dragged the blade tip along a straight line, and the wrapping was easy as pie.

-
@ReamerPunch said:
Do the serrated blades of the Wave/Surge/Rebar/ST300 count?
Seriously. That tiny plain edge tip of the ST300 serrated blade is just brilliant.
I usually use those for short draw cuts. Nothing too ambitious. But I had to wrap a birthday present, so I did a draw cut of about 50cm, about 1.5 ft. Man, did it knock it out of the park! I kept a steady hand, and dragged the blade tip along a straight line, and the wrapping was easy as pie.

I'm thinking that they don't
If it's like the Wave-OG or ST-OG, it's really a dedicated serrated blade. That tiny plain edge benefits from the chisel grind that many of these combo edge blades have. Especially when you use it along a straight edge like a ruler or a square... you know exactly where your edge is. For regulation purposes, I'd say it has to be one of the blades that was intended for use as a combo edge, like the Skeletool. 
I friend of mine has been carrying a part serrated knife for most if his life... for the last few years it's been a SOG.... SOG Flash, or something similar. The other day he asked me to run it through the carbide "sharpener" I happened to have - the blade was chisel ground, but really nicely done. That knife of his was well worn, and had many stories to tell. It wasn't well kept, but it was used over and over and over again - and that's the important thing... isn't it?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login