Spartan Saturday!
-
I'm always picking up interesting used Spartans if I can get them cheaply enough. These two came with damaged blades. The small blade on the knife on the bottom of the picture had a horrendous bend at the tip; it actually caught on the liner when I closed it. As half expected, it broke off in an attempt to straighten it and about 2mm was lost. I reshaped it with 320 grit sandpaper, finishing with 1000 grit. The job isn't perfect as you can you see but I'm happy anyway. I might try to improve it another time.
The large blade on the 80s Standard on the top came with a reshaped tip, a crude repair to a break. It had no point at all. Why they chose to make it almost as round as a butter knife baffled me! ??? At least they hadn't made it a sheep- or lambsfoot. (I wouldn't have bought it in that case.)
I had to remove quite an amount of metal to get a point back. The blade had lost about 4mm of its length and I was careful enough not to shorten it further. Again, it's not perfect, but I'm happy with the outcome. The edge's tip curve is better than the other's. I'll leave this one alone.
Just to add, the Standard here is my favourite "Spartan". Can anyone see why? ;)
-
Is that awl actually to the rear of the corkscrew?
-
No, it's in the normal position on both knives. The bottom knife might make things confusing as the shield is on the back scale.
-
@Sawl Goodman said:
I'm always picking up interesting used Spartans if I can get them cheaply enough. These two came with damaged blades. The small blade on the knife on the bottom of the picture had a horrendous bend at the tip; it actually caught on the liner when I closed it. As half expected, it broke off in an attempt to straighten it and about 2mm was lost. I reshaped it with 320 grit sandpaper, finishing with 1000 grit. The job isn't perfect as you can you see but I'm happy anyway. I might try to improve it another time.The large blade on the 80s Standard on the top came with a reshaped tip, a crude repair to a break. It had no point at all. Why they chose to make it almost as round as a butter knife baffled me! ??? At least they hadn't made it a sheep- or lambsfoot. (I wouldn't have bought it in that case.)
I had to remove quite an amount of metal to get a point back. The blade had lost about 4mm of its length and I was careful enough not to shorten it further. Again, it's not perfect, but I'm happy with the outcome. The edge's tip curve is better than the other's. I'll leave this one alone.
Just to add, the Standard here is my favourite "Spartan". Can anyone see why? ;)
dunno, no key ring?
-
Yep, that's one!

There are two more. I'll give one of them away cos it just isn't obvious in the pic, or even in the real, without handling it. The mild flutes on the corkscrew don't irritate my thumb when using the small blade and flat SD.
For the other, think 80's, think pre-2000s. ;)
-
In with the Hudson Bay Company Millennium Spartan!

-
Been carrying this one lately.

-
The thing I like most about sheepsfoot and lambsfoot blades is that they make stabbing into materials practically impossible. I have to do this at work sometimes to make label slots in plant pots. The small blade is perfect for it but I have to be very careful that it doesn't fold in use. Maybe dropping the tip while keeping a little belly would make a fair all purpose compromise.
-
I like the regular blade shape just fine, but wanted one with a sheepsfoot. Great opening and cutting things up shape, and no belly at all, please. Defeats the purpose. The small blade is still there with it's proper shape.
My one and only work knife is a Spyderco Delica wharncliffe. Nothing works better than that blade for boxes, cutting flaps, bands, etc. The straight edge keeps things from sliding off as much, and gets the edge right into the cut right away. There's a huge thread over on Spyderco's forum on the inception of that knife, if you care.
Anyway, I prefer Victorinox, and mostly use them now, but that Delica is my dedicated work knife, and always will be... because it works. Seems a little off topic, but that's why I like the blade shape, and I really like this, and all Spartans. The camo is cool too.
-
The first time I did the Minimalist Challenge, I intended to carry primarily my SI. I threw in a Spartan for variety. What happened, though, was I fell in love with the Spartan and how capable a knife it truly is. Power to weight ratio, the Spartan is hard to beat.
-
Still the one.... pocket perfection imo.

-
@Barry Rowland said:
The first time I did the Minimalist Challenge, I intended to carry primarily my SI. I threw in a Spartan for variety. What happened, though, was I fell in love with the Spartan and how capable a knife it truly is. Power to weight ratio, the Spartan is hard to beat.All that, and it's a phenomenal value. My Standard above has become a favourite carry.

-
Exactly!
-
Spartan Saturday


-
Great pic for the Weight Loss Challenge Greg!!

-
Hello Spartans and Weekenders

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

