Been doing some work in the Wiki
-

The orienteering tool usee three springs I think. That would add two layers to the 23 config with the thinner compass. So perhaps it's an Evolution 23 with orienteering tool instead of compass

-
Any idea why the Wenger Camper 17 [1 17 92 300] is not mentioned?
-
Hi - Thanks for this
You are right - It does not seem to be in the Wiki
So it is an Evolution 17 - With a tent printed on the scales - Is that correct? ???
If so we can put it as a variation of the 17 and in the alpha list
-
Yes it is. Let me know if you need a good picture. It is dark now but I could do one tomorrow.
But surely should have a reference under Camper?
Regards....Keith
-
Hi Manocrom,
Yes a photo would be great - I did find one on ebay - But one of our own is much more preferable and you would be credited as the author

- I'll send you a PM with an email address
@Manorcom said:
But surely should have a reference under Camper?@Huntsman said:
If so we can put it as a variation of the 17 **and in the alpha list **My proposal would be that, as the toolset is the Evolution 17 toolset, the model is referenced on that page.
There would also be a line for the Camper model/variation in the main 85mm alpha page .... This one:
https://sakwiki.com/tiki-index.php?page=Wenger+85mmThis is typically the approach we take when one model is essentially a variation of another model eg different scales
I made these changes - So please check them out- There is a nice empty space at the bottom of the page where your picture could go!
:)
-
Huntsman, all looks good. I should add that the main blade is non-locking.
Please PM your email for the photo.
Regards...Keith
-
Just found a Wenger Classic 10 I had statched away. Looked for it in the Wiki but there's only a mention of it in the Commander's page.
Shouldn't it be in the model list, even if with a mention of "see Commander"?
I can try to get some pics of it for the Wiki, if you want. Don't know if I can get some good enough, though...
:-[
I awlso noticed mine has "WENGER" embossed in the scale, near the scale cutout for the awl.
-
The Classics are listed here in the 85mm model list: https://www.sakwiki.com/tiki-index.php?page=Wenger+85mm
But indeed they are not featured on the 2 layer model page: https://www.sakwiki.com/tiki-index.php?page=Wenger+85mm+2+Layer+Models
-
@Reinier said:
(...)
But indeed they are not featured on the 2 layer model page: https://www.sakwiki.com/tiki-index.php?page=Wenger+85mm+2+Layer+Models
Yup,that's the one I saw. It's a more common model than the Commander, isn't it? Maybe it should have its own page and pics.

-
Nick4 and Huntsman, you have PMs, regarding the X-mas series.

-
Hi Knights,
We have received a couple of nice images of the Christmas series from Marcos of the VicSpain youtube channel and updates on the released quantities.
The images are in the Christmas gallery and the numbers have been updated.
https://sakwiki.com/tiki-index.php?page=Victorinox+Christmas+SeriesAs always - Let us know any comments, corrections, feedback etc etc
Thanks Marcos
-
Hello,
I don't know if it would help for datation or if there is enough data already, but here is one oldie I got by me that may give some more hints on the tools and markings that could exist at the same era :Tang stamps :
- small V VSSR,
- Victoria Officier Suisse with crossbow
Scales :
- full cellidor scales
- 'gold colored' shield (nickel silver?)
- bail
Tools :
- small clip point blade
- 29 teeth saw,
- backside Philips with square shank and file
- can opener with +PAT
- cap lifter with wire bender, and (I'm not sure) "weak stripper", e.g. not the kind I usually see on 93mm




-
A few (more) things about SwissCards... We all know those were patented in 1996 and introduced in 1997, but did you know that the very first SwissCards had different product numbers and inscription “7 Features - 10 Functions“ inside the box just above the Card?
Some of the product numbers from very first SCs:
4.3407 Grey with red blade handle (and sliding door)
4.3407.6R Light Gray with red blade handle and sliding door
4.3437R Grey with black blade handle and sliding door
4.3437.3 All Black
Later, inscription was changed to “10 Functions“ and product numbers were changed to those that are still used today.

-
Thanks Nele - Great detective/investigation work.
And ........... it's in
https://sakwiki.com/tiki-index.php?page=SwissCard- Please check it out to see that it is all OK - I got both the pictures in too - But via hyperlinks.
Why is the Wiki never finished? ???
.... And why do these updates always turn into projects?
:o 
So it turns out we did not have any model numbers at all in the Wiki - So they are there now - Was not sure about the formatting for these - So see if you like it folks ???
Also spotted a couple of interesting anomalies on the Victrinox side:
In the Vic numbering convention the main four digits always represent the toolset and the last numbers after the full stop - The colour/scale material etc
But Vic has not followed this convention for the SwissCard ....... Well not for the Classic or Lite ........ But they did for the Nailcare
.......... What is going on Victorinox? ???
Also hilariously the SwissCard is described as having 10 functions - on their website:
https://www.victorinox.com/global/en/Products/Swiss-Army-Knives/SwissCards/Swiss-Card-Classic/p/0.7100.T
But in the list on their website (which is reflected in the Wiki) there are only nine!
Note: In the Wiki list the protractor is no longer there and the sd tip is the 9th tool/function - Note the protractor was not there in the first models!! - So still 9!!BTW This discrepancy is also there for the SwissChamp last time I checked!!
One again I say: "What is going on Victorinox?" ???
- Please check it out to see that it is all OK - I got both the pictures in too - But via hyperlinks.
-
Oh I think I might have cracked one of them!!
Ruler cm and Ruler inches = Two functions
Might also explain the SC anomaly!I do think that is pushing it a bit tho' - A ruler is a ruler - Right? ???
-
@Huntsman said:
Oh I think I might have cracked one of them!!Ruler cm and Ruler inches = Two functions
Might also explain the SC anomaly!I do think that is pushing it a bit tho' - A ruler is a ruler - Right? ???
Yep! That’s definitely pushing it H…wait there’s more, if you ring in the next 20 minutes get metric and imperial for the price of one :)
-
@m47mu74nt said:
Hello,
I don't know if it would help for datation or if there is enough data already, but here is one oldie I got by me that may give some more hints on the tools and markings that could exist at the same era :Thanks for this m47 - I think this info would go down well in the Vintage SAKs thread ........
-
IMO Victorinox never in all their years thought there would be a site dedicated to documenting their products. I have always wondered if anyone at Victorinox has such a detailed accounting? Do they even have records or do they refer to the WIKI? ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
