Protecting scales
-
Hello knights I hope you all had a good Christmas !!
This year Santa brought me the 2020 deep river special edition classic. My query is, is there a way of protecting the scales if I carry it on my keys ?
I had another of the special edition ones a couple of years ago and I had to take it off after about a year as the design was starting to come off.
The little leather sock type case comes off quite easily.
Any advice would be appreciated -
What about a pouch?
Have a search for "Victorinox 4.0515".
It fits the Midnite Manager or Minichamp but might be fine for a Classic too
-
What I think would be ideal is a well fitting pouch that has a stretchy lanyard that you can attach to the keyring.

My stock Rambler came with a suitably fitting (and free!) pouch, but that pouch has no lanyard attachment and falls off all the time.
-
I have seen one on Amazon that’s more like a mini leather key ring from a company called “tuff luv”
Has anyone any experience of them ? -
Can some one in your family sew?? Sew up a nice sleeve with elastic at the top so it will fit snug but come off easy.. Justa thought..

-
So mrs nolongerlurking27 suggested clear nail varnish on the scales , I cannot work out if this is madness or genius?
-
@nolongerlurking27 said:
So mrs nolongerlurking27 suggested clear nail varnish on the scales , I cannot work out if this is madness or genius?This is a UK site but I'm sure you can get it across the pond

I think you might need to remove the scales first though (if you want to open said SAK afterwards
) -
@nolongerlurking27 said:

Ha that’s ideal I’m from/ live in the uk
Would just a thin coat work, also is it something I need to keep applying?TBH I've never used it on a SAK (I'm in the Alox camp. No need :D )
We used Clear on boots, in the 80's (basic training) but, if we got found out, it was "parade the guard" time
Not the best option for boots (cracked when you slammed your foot down) but "should" be ok for pocket use

-
Be VERY careful if using clear nail polish. It doesn't go on evenly. I messed up a couple of old scales using it. Some brands contain acetone or other solvent which etches/crazes the scales.
Rich -
A small drawstring pouch might work, but not sure the extra bulk would be worth it.
A clear packing tape might work like automotive “clear bra”. But I imagine it would be tough to do the rounded ends. Many designs only cover the flat-ish parts, so it might work well enough to protect the printed graphics.
-
I put clear Gorilla Tape over the hot-stamped emblem of a Mikov-SAK type recently. The stuff is really tough--I use it for any repair where super glue isn't gonna work, and duct tape is better, but I don't want the design to be visible. It's also good packing tape. But, the residue is nasty, and gums up utility knives and scissors I use to cut it. Somewhat hard to get off too.
-
Thank you to everyone for the suggestions all very much appreciated

-
Keys/key chain carry can really do a number on SAK scales. If you're set on carrying a cellidor-scaled SAK this way, a small pouch that attaches to your key ring would probably be your best bet. Other options include:
-
Carrying an unprotected cellidor-scaled SAK on your key chain, with the understanding that the scales will get beat up and it will likely be a matter of time until the scales actually fall off.
-
Nylon-scaled SAKs seem to last somewhat longer in this application than cellidor, though the screen-printed(?) logo does not.
-
Alox is the ultimate choice, though it will still show wear, especially if colored. And, of course, one loses the T&T.
-
-
Thanks for all this, the blue classic I carry as standard is very battered (part of its appeal) however I don’t want my deep diver to end the same.
I think that a cover is the best option -
@cody6268 said:
I put clear Gorilla Tape over the hot-stamped emblem of a Mikov-SAK type recently. The stuff is really tough--I use it for any repair where super glue isn't gonna work, and duct tape is better, but I don't want the design to be visible. It's also good packing tape. But, the residue is nasty, and gums up utility knives and scissors I use to cut it. Somewhat hard to get off too.Hi Cody. The biggest tip for duct tape/ gorrilla tape residue is WD40 works great. Use it the whole time.
Regards Bobby
-
@nolongerlurking27 said:
Thanks for all this, the blue classic I carry as standard is very battered (part of its appeal) however I don’t want my deep diver to end the same.
I think that a cover is the best optionFWIW, I’ve had a few knives come in over the years that had a piece of clear scotch tape on them and the scales underneath were shiny and perfect underneath. Usually the edges and perimeter were worn down and anything uncovered showed normal pocket and carry wear.
Where did your old one wear first? I’m guessing around the edges of the scales first from what I’ve seen if pad printed knives with significant wear.
-
Yes around the outside edge. Only noticed it when I sharpened the blade
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login