Which multitool should I buy?
-
Welcome Jona. To address a few points that haven't ben answered yet: Yes, the Compact is the only two layer SAK with scissors. The Super Tinker (91mm) is bigger in all dimensions than the Small Tinker (84mm). If you are carrying this in an organizer I don't think that's a big difference. There is a difference loose in a pocket, but I carry the Super Tinker or more ofter a Pioneer X all the time with no complaint.
The Super Tinker and the Compact are both great tools. Different tool sets however. If pairing with an MT I would go with the Compact.
You should understand that the back spring phillips on a SAK is no match for the phillips on any MT. The back spring tool needs a lot of clearance to use, and can not take a lot of torque. So the Compact or a Climber would pair well with any of the MTs mentioned above.
Pictures below are a Small Tinker in red scales, a Compact in black scales and a Super Tinker in US Flag scales.


-
Hello,
thanks for your welcome, Poncho and Steve! And also thanks for the pictures!
I have made some thoughts and these are the results:
I will order a Super Tinker for my EDC organizer. It'll replace the Small Tinker with no problem I think, and I've got the nice SAK scissors.
The multitool won't be part of my everyday and everywhere carry. So the Philips is a must-have, since I want to have one available for emergencies, even though I can see that it cannot compete with the one on a multitool.
Plus, I never need the corkscrew. So the Super Tinker is the way to go!Now, what multitool to get? It should be a nice addition to the Super Tinker and will not always be carried.
The Rebar is out of my decision because I dont like the handling of the blades, saw and file due to inside tools.
So I have to decide betweed LM Wave 2H and Victorinox Spirit XC.
Those are different concepts, I know. LM got the diamond file, bit exchanger and eyeglass-screwdriver (no one in the Super Tinker so thats an advantage). The 2H Wave has no one-hand-opening, so there is no advantage to the Swisstool there.
The Spirit has the better build quality, chisel and package opener, only a serrated blade (which is fine since the SAK has a standard blade). I dont really need the bottle cap lifter and can opener, since the Super Tinker already got these. Is the Philips really a lot more slippery because of the polished finish?
I'm unsure which plier head I like more. Exchangeable cutters and nice needlenose vs more robust pliers. I would get the Sprit with the ratchet and bit kit. So the only advantage of the Wave's bit exchanger is the option to carry a different bit than a Philips in the multitool, for example a torx, if I haven't got LM bit kit/ VIC ratchet with me.Difficult decision, I know. What would you recommend as a not-always addition to my EDC kit? I like build quality, but I dont like redundancy. At least not in my EDC.
Nice regards,
Jona -
Jona, you will be happy with either option. Yes, the Victorinox will have less traction due to the polished stainless steel, but the handle geometry combats that. The Leatherman 2H Wave does have that removable eyeglass driver (as an eyeglass wearer, I have used that a time or two and find it very handy), and the flat Leatherman bits as well. The Vic does have better quality throughout, but the Leatherman is not that far behind...mind you I have also heard and seen a few photos indicating lesser quality control from Leatherman. With that said, I have bought quite a few recent Leathermans and I can honestly say I have not seen any issues (knock on wood).
Just review pros and cons, availability, and price. Either of those will do you nicely I think.
-
If you don't need heavy duty, and can find one, a SOG Paratool can be Lego-ed into exactly what you seek. The tool can be easily disassembled and the socket adapter added. Here's what I did with mine. And you get a plain edge and serrated blade. Plus the pliers are much more closer to what you seek.

-
Hi,
I've now ordered both LM and Victorinox. Then I can decide for one...
The modularity of SOG is nice, but the Paratool seems rather badly available in Germany.
-
Hi Syncop8r,
yes, keeping both would be ideal, but moneywise I have to decide

@Syncop8r said:
Welcome - you'll fit in well here.
(Your English is really good btw)Thank you :)
I've ordered the Spirit XC Plus ratchet. That is the version with the serrated blade and scissors with the ratchet kit.
Now I've noticed that there also exists a version with both serrated and standard blade, but without scissors. But this version does not come with the ratchet kit, so I would have to buy the parts seperately. That would end up being about 70€ more expensive than the XC Plus, so I guess that's not worth it (that nearly gets a Rebar...). Also I then have the option to swap to a knive without scissors.
But let's see, maybe I prefere the Wave :) -
I always miss the awl at work when I decided to take the Wave along.
Considering how slim the Spirit is, it's my one true multitool.
So many tools inside... -
@Mechanickal said:
I always miss the awl at work when I decided to take the Wave along.Considering how slim the Spirit is, it's my one true multitool.
So many tools inside...Didn’t you have a bit converted into an awl?

Between Wave and Spirit my choice would be Spirit too.
-
Hi,
happy new year to all of you!
I now have both Wave and Spirit XC Plus on the table.
Wow, really hard to decide.
The Leatherman's quality is very good, better than I thought. It can really compete with the Victorinox.
The tools open seperately, I mean no other tools come along.
Is it normal on the Spirit that the pliers dont open straight? The Leatherman does that better.
<a href="https://show.picr.de/40223616fk.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://thumbs.picr.de/40223616fk.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> <a href="https://show.picr.de/40223619ys.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://thumbs.picr.de/40223619ys.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I like the small screwdriver on the Spirit. It could open luster terminals, the Wave couldn't do that.
The Spirit has a better value for the price. I get the Spirit with the ratchet + extension for the price I pay for the Wave only.
The Spirit's blade is 3/4 serrated, and 1/4 straight. I would prefere a completely serrated blade, but that isn't available.I tend to keeping the Spirit, because of the price. When I want to get the Spirit's functionality out of the Wave, I have to buy a seperate sheath and the Victorinox ratchet. So that would be about 60-70€ more exepensive, and that's half a Wave.
<a href="https://show.picr.de/40223653zh.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://thumbs.picr.de/40223653zh.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
You would recommend the Spirit?
Regards,
JonaEdit: Oh, and the Wave can crimp wire connectors. Thats another plus for the Wave.
-
The Spirit it is then, if it fits you better.
The MT.O way is to keep them both, but only if you plan on collecting.

-
I would take the Wave over the Spirit. I had a Spirit for a while but found it too fiddly to get tools out when my hands were dirty or wet. Also the Phillips on the Spirit tends to cam out easily . I also think that the pliers and wire cutters are better ion the Leatherman.
Lot's of folk like the Spirit but it's not for me.
-
Hi Steve,
why do you prefere the Leatherman's plierhead?
The Victorinox' seems more stable to me. The exchangeable cutters are great though. -
@Jona said:
Hi Steve,
why do you prefere the Leatherman's plierhead?
The Victorinox' seems more stable to me. The exchangeable cutters are great though.The cutters are better even on the older Wave without the replaceable cutters. The Spirit cutters are softer and damage more easily on harder wire..
-
I agree with all that Steve said.
However, I love my Spirit too.For me it depends on the task at hand.
I think of the Wave as the better workhorse, while the Spirit is the better general EDC in my opinion.For example, the following points are my personal observations. Others may have made totally different experiences...
-
Pro Wave -
Pliers -> Do you need needle nose? -> Wave
Wire cutters -> Wave (old or new)
Drivers -> Wave (remember, there is an extender available)
Knife blades -> Wave (more solid, bigger, oho, 1 plain & 1 serrated)
Pocket clip -> Wave (non on the Spirit) -
Pro Spirit -
Scissors -> Spirit (after mod)
Chisel/wire-stripper -> Spirit
Awl -> Spirit
Reach of drivers -> Spirit
Form factor/weight -> Spirit (if no additional bit kits are bought, otherwise Wave)
QA -> Spirit -
Tie -
File -> a tie for me, Wave has diamond, Spirit better normal file
-
-
Hi,
I have now decided for the Leatherman Wave. It has better blades, the bit driver, I prefere its saw and file. Plus the Spirit I ordered had a minor damage, the bottle opener tool was a bit loose.
Are those scuffings on the plierhead and liner locks on the Leatherman normal?
<a href="https://show.picr.de/40238724hw.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://thumbs.picr.de/40238724hw.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> <a href="https://show.picr.de/40238728dd.jpg.html" target="_blank" rel="noopener noreferrer"><img src="https://thumbs.picr.de/40238728dd.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>PS: Is the Bit Kit worth it? Or should I rather get the extension only and put together a bit kit of standard hex bits myself?
-
Good morning Jona

it's normal for the plier head to rub inside the handles a bit, yes.
Normal hex bits work ok in the extension, but sit a bit deeper. That's due to the double-sided LM bits being slightly longer.
The Leatherman bits work very good for me and seem to hold up well.
I'll add some pictures of my Wave In using for years....
Btw: Some play on the Spirits implements in closed position is normal. At least on my two examples.




-
@Jona said:
PS: Is the Bit Kit worth it? Or should I rather get the extension only and put together a bit kit of standard hex bits myself?Do you know witch bits are you potentially needing ?. The bit kit is not really cheap so think first about it ?
The bit extension itself has been done for double sided bits (size >= 30 mm ). The standard sized bits (25mm) sunk inside the adapter and you will need the plier to extract them.
-
@chapsjmg said:
Do you know witch bits are you potentially needing ?. The bit kit is not really cheap so think first about it ?The bit extension itself has been done for double sided bits (size >= 30 mm ). The standard sized bits (25mm) sunk inside the adapter and you will need the plier to extract them.
I don't need pliers to extract them. A bit of a wiggle and a pull does the trick for me.
Just done that for the above pictures.
However, there could be tighter adapters than mine, or variations in hex bits.I would suggest the LM bits though, yes.
EDIT:
That reminds me, some people reported problems with the LM bit extender some time ago, where the bits got stuck. The original Leatherman bits.
It was due to the retention ring overlapping at some point.
I had that with the bit adapter used for the Juice (fixed by shortening the retention ring).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
