Vintage SAK Owners Club
-
And the that super knife looks like c.’75. And not gonna ask for more pics of that one ‘cause we both know how that goes. Clearly from before the “1973” knife in question. But I’m sure you’ll doubt something there too. ;)
-
Hello guys! Happy 2021!
Here is another SAK, also claimed to be from 1973, same seller, but in this case, the featured "Modeler" has a Clip-Point, the VICTORIA stamp and five turns cork screw:
-
@MexSAK said:
Hello guys! Happy 2021!Here is another SAK, also claimed to be from 1973, same seller, but in this case, the featured "Modeler" has a Clip-Point, the VICTORIA stamp and five turns cork screw:
Wow. I have never seen one that old, and I watch most Modeler auctions as its one of my favorite models. I would love to see it with the scales off to see if its real, or a repair/mod of a similar vintage Champion. You know that Victorinox was making mag glass knives in the early 70s "Victoria" era, so its not unheard of that this is a real thing. But this is the first time I've ever seen one. Until this the only Victoria-era mag glass knives I've seen are Passengers, Explorers, and Champions.
-
Hi Jazzbass, you're right about the scales. One day I finally found the Champion with old tools, VOS stamp and a magnifying glass / Phillips but when I removed the scales I found it was reriveted. As for the c.1973 Modeler, one similar was shown by German collector a few years ago and I saved a couple of photos.


-
Why would someone remove the scales from a 1970s SAK in order to verify anything? The scales would get damaged in the process, didn't they? There should be any other ways to make sure that it is -or not- a MODED SAK... Please share ;)
-
@MexSAK said:
Why would someone remove the scales from a 1970s SAK in order to verify anything? The scales would get damaged in the process, didn't they? There should be any other ways to make sure that it is -or not- a MODED SAK... Please share ;)Some folks can tell, I started a topic about this very question:
/post/1430680 -
@jnoxyd said:
As for the c.1973 Modeler, one similar was shown by German collector a few years ago and I saved a couple of photos.

That's cool - thanks for sharing. I like to see several of these in the wild before assuming they're real. It's reasonable to think they'd make several runs of different tool combos as they were expanding the line by in 73-74. Until this, though, the earliest Modeler I've ever seen was early 80s.
@MexSAK said:
Why would someone remove the scales from a 1970s SAK in order to verify anything? The scales would get damaged in the process, didn't they? There should be any other ways to make sure that it is -or not- a MODED SAK... Please share ;)You can remove the scales without damage if you get them warm. These early 70s scales are a challenge because the plastic itself is not very stable (observe how the ends are curling up - super common with knives from this era). I did this on an early 90s Yeoman I found years ago that had a pen blade in place of the combo tool. Its the only one I've ever seen and I was 90% sure it was a mod and not factory. Pulled the scales and to my surprise - factory rivets. It's either a mistake that slipped through QC, a low volume custom order or a test idea for a new model that got sold off.
-
Looks correct to me for early ‘73. Also note that there’s no backside SD. Hard detail to ‘fake’ if you didn’t already know.
Nice part about partly peeling scales are they can be ‘verified’ as original assembly without taking them off.
Thanks Mexsak for the post and jnoxyd for the comparison pic.

-
One more Modeler from my collection. Think it’s a little later then VOS stamped one shown above. Mine has 2.4mm blank stamp blade, small holes/black spring scissors. Look at the liners type and arrangement , pics together another 1970s knife (c.1976-1979)




-
‘74-‘75 for sure. No way it’s on the + side of ‘76. Argument for ‘76 would be weak, IMO.
The Grand Prix is ‘78-‘79.
-
@kamakiri said:
%u201874-%u201875 for sure. No way it%u2019s on the + side of %u201876. Argument for %u201876 would be weak, IMO.How so? All these dates are approximate at best. Parts fall to the bottom of bins, repairs made, etc. Esp the older knives in times when things were changing a lot (like the 73-80 time frame).
-
Not sure of age of this one, but it seems to be similar to jnoxyd's:



-
@FolderBeholder said:
Not sure of age of this one, but it seems to be similar to jnoxyd's:


Yours is ‘85-‘86. Early ‘87 at the very latest.

-
@jazzbass said:
How so? All these dates are approximate at best. Parts fall to the bottom of bins, repairs made, etc. Esp the older knives in times when things were changing a lot (like the 73-80 time frame).This is exactly why argument for ‘76+ would be ‘weak’. Lots of things would have to be from the bottom of their respective bins. And that’s rarely done with main line construction.
My feeling without seeing more detail is that it’s about early ‘75.
-
@FolderBeholder said:
Thank you, I didn't know what age it was.

I should also say, if and assuming it has no eyelet in the awl that it would likely be on the ‘85 side of that range.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
