One Eleven 'n One Twenty-one
-
Happy New Year to you and everyone here Alexanderre!
@alexanderre said:
Day 1
Let’s go [emoji1316]
Sadly today we’ve discovered that our bathroom water boiler started to leak and probably needs to be replaced. Yet I’ve used a long Work Champ Phillips screwdriver to unscrew a safety mechanism that is used to drain the reservoir

P.S.: Happy New Year [emoji312] and best wishes from Ukraine [emoji1255]
-
@zrxoa1 said:
I didn’t sign up for this challenge because I already have the Badge, but I thought maybe I’d try to join in. Am I allowed? If not, it’s cool. I’ll just watch from the sideline! Haha!!Just in case...
Day 1:
First off, here’s a group shot of my 111’s.
Left side, top to bottom:
Locksmith with Meton Boss titanium scales
US Soldier
GAK
DAKRight side, top to bottom:
Hercules with Nite Ize pocket clip
Garant
Garant
Centurion with modded Sentinel scales with pocket clipIn the middle is my Sentinel with the red scales from my Locksmith.

For today’s use, my Hercules!


Sent from my iPhone using Tapatalk
What a nice list!

-
@Nix said:
The two dozen crew members of the 111mm challenge:- Nix
- Cody6268
- munsonhsr
- Alan K.
- SurgeUK
- Tet
- Comis
- Rizio Il Ghiro
- Ulzhan
- Barry Rowland
- Storm
- Sos24
- Old Lefty
- Alexanderre
- Echotech
- ReamerPunch
- Simon_Templar
- Fast Bill
- VICMAN
- Ron Who
- BobbyRsa (late start)
- Borg
- FoBo
- zrxoa1
What a nice list! :D
-
Cool use alexanderre btw!
-
@zrxoa1 said:
I didn’t sign up for this challenge because I already have the Badge, but I thought maybe I’d try to join in. Am I allowed? If not, it’s cool. I’ll just watch from the sideline! Haha!!Just in case...
Day 1:
First off, here’s a group shot of my 111’s.
Left side, top to bottom:
Locksmith with Meton Boss titanium scales
US Soldier
GAK
DAKRight side, top to bottom:
Hercules with Nite Ize pocket clip
Garant
Garant
Centurion with modded Sentinel scales with pocket clipIn the middle is my Sentinel with the red scales from my Locksmith.

For today’s use, my Hercules!


Sent from my iPhone using Tapatalk
Awesome collection and great to have you
Decided to start the New Year with a hike in the hills. Lovely day despite the shocking lack of snow.

The Hercules didn't get used, but just tagged along. And I'm pleased to say it didn't slow me down.....too much.....


Great way to start the New Year off
@alexanderre said:
Day 1
Let’s go [emoji1316]
Sadly today we’ve discovered that our bathroom water boiler started to leak and probably needs to be replaced. Yet I’ve used a long Work Champ Phillips screwdriver to unscrew a safety mechanism that is used to drain the reservoir

P.S.: Happy New Year [emoji312] and best wishes from Ukraine [emoji1255]
Sorry to hear about the boiler. Happy New Year to you as well
@SurgeUk said:
<u>DAY 1</u> (Happy New Year Awl
)I'm already impressed with the variety of the 111mm SAKs on offer and the usage shots :ahhh
Today, and the next 3 days, are work days for me so I don't anticipate much use
Also, being in the UK, I have to consider our ridiculous knife laws and will struggle to find "reasonable excuse" to carry (outside of the house/garden ::) )
So, here's one of my two 111's posing and letting it "Awl hang out"
Stay safe out there people

Nice pic and cool coloring on that lanyard. It is a nice compliment to the black scales
@Tet said:
Day 1
Happy New year everyone! Like many I’m happy to see the back end of 2020!
Lazy day planned today so I thought it’d be a good day for the cheesemaster! Great knife for me!Great use and love the Aquaflage scales.
Had to refasten a screw with the Beast.
That bottle opener has a beefy screwdriver.
That is definitely a beast of a SAK
@Ron Who said:
Day 1Happy new year everyone

It´s been a quiet New Year´s Day with nothing to do for the Hunter XT. Maybe later this evening.
Love the color and cool pic.
Happy New Year to you too
@FolderBeholder said:
Day 1
Nothing like watching the start of a new challenge to kick me into "I don't want to miss out" mode.
I've cleared it with Nix and I'm joining today! Hope you all don't mind me jumping in at the last hour.
Going to start the challenge with a Forester in Walnut:

Great to have you and beautiful Forester.
-
So many good uses and pics everyone

Looks like all of our NY resolutions are GTD with SAK

GTD is a philosophy I kind of follow and stands for getting things done, if you’ve not come across it. Invented by a Canadian guy called Dave Allen. I only loosely follow it but have found it’s made me much more productive at work.
-
Day 2
Here’s my arsenal for the challenge

- Adventurer
- OH GAK
- Mod 2008 Soldier (2018)
- Rucksack
- Outrider


Use so far - Adventurer opened a flea/tick treatment for Coco

-
Day 2.
I had to change some furnace and electric heat/air system filters and knew I had to do some prying to get to the filters, so I chose the GAK I got from Barry earlier this year. That was used for some small cutting jobs, as well as the cap lifter for prying open the tabs that hold the intake (that holds the air filter) for the electric heat off.
<a href="https://flic.kr/p/2ko4bfb" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50789053846_f625a38a86_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 2A by cody6268, on Flickr
Also, had need for some scissors, so I got the Outrider, my only 111mm with scissors. These Bosch branded examples were a part of a group buy done here back in April of 2019. Even with shipping from Germany, still ended up being about $15 cheaper than what an Outrider here is in the States.
<a href="https://flic.kr/p/2ko4CvU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50789142222_e9235caf49_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 2B by cody6268, on Flickr
Just me, or are the GAK liners thicker? Or am I just looking at it odd? And, yep, I gotta straighten out those liners!
<a href="https://flic.kr/p/2knZcpR" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50788277323_9378f6a096_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 2C by cody6268, on Flickr
-
I had to change some furnace and electric heat/air system filters and knew I had to do some prying to get to the filters, so I chose the GAK I got from Barry earlier this year.
Also, had need for some scissors, so I got the Outrider, my only 111mm with scissors. These Bosch branded examples were a part of a group buy done here back in April of 2019. Even with shipping from Germany, still ended up being about $15 cheaper than what an Outrider here is in the States.
Nice pics cody!

-
I had to change some furnace and electric heat/air system filters and knew I had to do some prying to get to the filters, so I chose the GAK I got from Barry earlier this year. That was used for some small cutting jobs, as well as the cap lifter for prying open the tabs that hold the intake (that holds the air filter) for the electric heat off.
<a href="https://flic.kr/p/2ko4bfb" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50789053846_f625a38a86_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 2A by cody6268, on Flickr
Also, had need for some scissors, so I got the Outrider, my only 111mm with scissors. These Bosch branded examples were a part of a group buy done here back in April of 2019. Even with shipping from Germany, still ended up being about $15 cheaper than what an Outrider here is in the States.
<a href="https://flic.kr/p/2ko4CvU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50789142222_e9235caf49_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 2B by cody6268, on Flickr
Just me, or are the GAK liners thicker? Or am I just looking at it odd? And, yep, I gotta straighten out those liners!
<a href="https://flic.kr/p/2knZcpR" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50788277323_9378f6a096_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 2C by cody6268, on Flickr
The "Bosch" Outriders are weird. You can still get them, they are still a few Euros cheaper than stock Outriders and I wonder what the heck this is all about? Did Bosch make a terrible judgement call a few years back and they are still trying to cut their losses? Or is there a regular "Bosch Outrider" line of SAKs where you simply save a few bucks if you are willing to advertise a well-known German tools manufacturer? I would really like to know. In any event, I opted for the "Bosch Outrider" a few weeks back in order to save a few bucks.
-
@Simon_Templar said:
Is that the version for the French navy?
Wait, I think that’s a joke!?! I’d just never seen the navy camp in real life and just thought I’d spice it up a bit.
I’m with echotech, I love the looks of that garant! I’ve been thiiiis close to pulling the trigger on one, but unusually for me managed to exes some restraint
-
Day 2

-
- Nix
- Cody6268
- munsonhsr
- Alan K.
- SurgeUK
- Tet
- Comis
- Rizio Il Ghiro
- Ulzhan
- Barry Rowland
- Storm
- Sos24
- Old Lefty
- Alexanderre
- Echotech
- ReamerPunch
- Simon_Templar
- Fast Bill
- VICMAN
- Ron Who
- BobbyRsa (late start)
- Borg
- FoBo
- zrxoa1
- ElevenBlade
-
Day 1
Coming in just under the wire here....
I've been wanting to do a 111mm challenge for a while now, so here's my chance. This isn't an ideal month for me, but what's a challenge without a challenge?
I'm still going between work and home, and nowhere else... And with all the challenges in the last year, I've tightened every screw in sight. I don't have any outdoor trips like hiking or camping planned, so there may be quite a few glamor shots, I'm afraid.
This might be the first Challenge where I go with more than one qualifying MT.... So stay tuned!
I'll start with a One Handed Trekker. I may switch to a OH Nomad at some point, just for fun. And if I get really adventurous... I might buy the Adventurer that I've had my eye on for some time now.
Let's roll!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login