What did you use your Sak on today?
-
More and more, I'm using one of my ROTS's* to do 2 things:
-
Open packages of used knives that come from Ebay. (I usually use the can opener to open boxes, and the small blade to open envelopes).
-
Pry open stuck blades and tools in the other used knives I buy. I usually use the bottle opener for that. The big flathead screwdriver pries against the fingernail nicks quite nicely, and can also pull out stuck tweezers and toothpicks.
As you can imagine, my fingernails are taking a huge beating these days, so,
- The Esquire, or one of the random Classics, or a Sportsman that came in the mail, get to have a whack at them.
- ROTS = Ragged Old Trusty Spartan.
-
-
Just doing that, a little wood splitting


-
@Jim the Brave said:
More and more, I'm using one of my ROTS's* to do 2 things:-
Open packages of used knives that come from Ebay. (I usually use the can opener to open boxes, and the small blade to open envelopes).
-
Pry open stuck blades and tools in the other used knives I buy. I usually use the bottle opener for that. The big flathead screwdriver pries against the fingernail nicks quite nicely, and can also pull out stuck tweezers and toothpicks.
As you can imagine, my fingernails are taking a huge beating these days, so,
- The Esquire, or one of the random Classics, or a Sportsman that came in the mail, get to have a whack at them.
- ROTS = Ragged Old Trusty Spartan.
ROTS.... I like that ! And I definitely have come to prefer the Spartan.
-
-
dull day for me I just opended a foil pack of ground coffee with the classic
-
Well today I learned that the bottle opener also works as a wrench for wing nuts. Who knew. :D
-
Jim, that is an inventive use - good work!

-
Used a Champion to make a (functioning) paper SAK


-
Have fun making your Martinox :P
-
@Rizio Il Ghiro said:
Jim, that is an inventive use - good work!
Right? The wing nuts on the battery cover of my sawmill tend to rust tight. I can pry them loose with my thumb and finger, but that hurts with pain. So I got enlightened and used the bottle opener on my Farmer as a wingnut wrench. One of those aha moments. Or maybe I should call it an Alox Moment.
-

Sent from my iPhone using Tapatalk
-
Lovely work, colt1911,

-
As usual, one of my biggest uses for my SAK's is opening other SAK's.
- The packages as they come in the mail. (Did it yesterday)
- The stuck blades and tools (Did it recently)
- Prying the scales off in some cases (Did it last night to clean up a badly gummed up Midnight Manager where the pen would not come out of the scale).
-
Making a shelving unit for my models, and I needed to trim a 45° so I could countersink the corner support and well, OUCH!! :ahhh i did a no no,,
JR

-
Ouch, MP! I hope it mends quickly! Why is it those nicks seem to bleed endlessly?!
-
If curious this is how far I got on the shelving unit, I ended up making the five middle shelves adjustable, had a LOT of holes to drill, but only so deep for the pegs! Then I wrapped each shelf in felt, but I still have the bottom to do, and then to paint the frame, and I’ll be done!
JR
-
Looking good! It’ll be great to see the finished article in use!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

