Original wave owners club,
-
Thanks Steve!
I have two Waves now both 0399.
The nice one got the old dark red/brown better quality sheath, as you've seen it.The other one I've got yesterday came with the lighter brown softer leather fuzzy inside still not bad leather sheath, that still appears to be an older original.
Two different sheath styles for the same year 0399 ? That's what got me wondering

So as per the first eBay listing they've shipped them at least in 2003.
Maybe the previous owner mixed up the sheath for some reason
:DOr 1999 was the year where they've changed the sheath style

The last eBay listing shows a sheath that looks like the original style but not fully. The colour seems too brown to me, also the texture is super smooth.... I don't know

-
I think yours is a replacement, they definitely came with the old style in 1999. Like I said I believe it was only in the last year or two maybe. I'm thinking 2003-4
-
Roger that

Makes sense

-
@SteveC said:
And here's one with the old sheath, they both have the same date code so I don't know what to make of that
Different supplier
perhaps they still had several of the older ones left and gradually phased them out as they got these newer ones in
Sounds like something they would do anyways :D -
I'm joining the club!
I found this Wave on Ebay for less than $50:
And then, I found this one for slightly more and I couldn't stop myself:


-
That sounds all too familiar hsherzfeld

Excellent scores

-
@McStitchy said:
That sounds all too familiar hsherzfeld
Excellent scores

Thanks. I'm so glad that I found a safe space where I can open up about this terrible addiction....even though everyone here is an enabler.
-
@hsherzfeld said:
Thanks. I'm so glad that I found a safe space where I can open up about this terrible addiction....even though almost everyone here is an enabler.Fixed for you ....

-
@hsherzfeld said:
Thanks. I'm so glad that I found a safe space where I can open up about this terrible addiction....even though everyone here is an enabler.You're very welcome

-
Congrats hsherz
OG Wave is an awesome tool for sure

-
@hsherzfeld said:
I'm joining the club!I found this Wave on Ebay for less than $50:
And then, I found this one for slightly more and I couldn't stop myself:
Congrats, One of us One of us !!!!!

-
Well, the first one arrived yesterday. The outer blades are screwed in super tight; I'm eagerly awaiting delivery of a pair of five-point Torx bits to rectify that problem. And the handles rattle a lot in the closed position, due to the loose plier pivot. Is that just a function of the tool's design? I have a well-used post-2004 Wave with pliers that are almost as loose, but the handles don't rattle when closed.

I'm not used to having such a variety of flatheads. The long one is slightly twisted; it might turn into an awl.
But those SCISSORS! This thing has SCISSORS! Not scissors, like the newer Wave, but SCISSORS!

-
From the two I have the seemingly un-used one also has some good play when closed.
It's not the pliers pivot, because when I open the pliers they have no play at the pivot at all.I took a magnifier to find out where the play/looseness in closed position comes from, and I saw it then.
It's the pliers mounting to the handles.
Either the whole for the screw in the handle is too wide, or the whole for the screw in the pliers arm.Also, it would help if the pliers arms did not have so much room within the handles in the first place. Btw, this varies from Wave to Wave.
So one could tighten the screws to press the handles closer to the pliers arms, but that would also tighten up the outer blades.
I'm sure it's not a fault but.... how do they say..."by design" :D
I'd like to hear from others to see if they experience the same and what they think about it

-
@McStitchy said:
Also, it would help if the pliers arms did not have so much room within the handles in the first place. Btw, this varies from Wave to Wave.So one could tighten the screws to press the handles closer to the pliers arms, but that would also tighten up the outer blades.
I'm sure it's not a fault but.... how do they say..."by design" :D
I think that's the problem with mine, at least compared to my post-2004 Wave. Not the plier arms, but the plier head in the closed position. Since the plier jaws are nestled in the opposite handles when closed, it doesn't matter how tight the handle pivots are. If the plier pivot is loose, AND there's room between the plier head and the walls, then the plier jaw, and the handle connected to it, will rattle. My OG Wave has at least 1/16" of clearance between the flat faces of the plier head and the walls of the handles, which is apparently enough room to rattle back and forth.
The pliers on the post-2004 that I have fit snugly between the parallel inner surfaces of the handles--so much so that there are scuff marks from this on the plier head.
-
Well then yours has a different problem because mine does not have any play at the pliers pivot at all

The connection of the pliers arms to the handles is the point of connection that shows the play and movement in my case
On the later OG model where they've changes the pliers arms to incorporate those retention springs this problem is much less reported btw.
-
@McStitchy said:
On the later OG model where they've changes the pliers arms to incorporate those retention springs this problem is much less reported btw.That's good to know, since my other OG Wave appears (from the Ebay pics) to be a later one.
-
My second OG Wave arrived! It was listed as "used" on Ebay, but it looks brand-new. All the blades have their factory edges, no wear on any of the tools, no scuff marks or scratches.
One question: does the OG Wave have bronze bushings/spacers/washers on the outside blade pivots like the new Waves do? Because these blades don't open nearly as smoothly as my newer Wave.
-
May not be broken in yet
Not sure about the washers but my OG Wave is smooth like my newer Waves
Looks awesome though and such great shape for its age
Congrats 
-
Nice score hsherzfeld

No washers on the OG Wave as far as I know

I'd give it a drop of oil and some use and see how it goes

-
Catching some waves at the beach in Port Aransas, Texas.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login