Gerber Balance
-
As much as I would have loved one of those it struck me as a liability nightmare. :ahhh
Def
-
I just snagged a knock-off of the Gerber Balance. The ZGB Slide-Out Multipliers. These:

The sliding mechanism is the same, but there are differences. The pliers are a different shape and have bypass cutters instead of the anvil cutters the Gerber has. The scales are different, and are only held on by two screws. The Gerber balance scales are held on by many screws. And finally, the tool load out is different. There is only one driver (the micro size), and no scissors. Instead it has a blade, a saw, the bitdriver, and a dual opener tool with can and bottle openers, which is similar to the Suspension's opener tool.
The blade is very sharp out of the box, and even the can opener edge can cut paper well. the driver on the end of the can opener is also well-defined with sharp edges. All the outer tools are non-locking, and instead have strong backsprings. The handle splay is a little on the large side, but still WAY less than the NXT's splay. The pliers are spring-loaded, and open the same amount as, and are generally the same size as, the NXT plier head.
It appears to be a very good copy of the Balance, and with an arguably better tool load-out. While I'd gladly give up the openers for the scissors, I don't think everyone would.
Now, the limitations of this tool are pretty much the same as the balance. It feels too big in my hands, it's difficult to open without the whole pliers jumping out of my hand, and the tool selection is pretty minimal compared to the large size. But it's a smooth tool that is easy on the pockets. The bitdriver is well designed - even though there is no lock, the ergonomics are such that really pushing on the screw wants to keep the driver open, not close it. So, that's nice. The driver is also almost in the center of the tool.
Note, the opening on this tool isn't as smooth as the Balance. Actually, as it opens the handle splay increases, so you have to make sure you're not gripping it tightly. I don't believe the balance does that. The balance isn't spring-loaded either, I don't think.
That said, as far as Chinese knockoffs go this one is absolutely top notch.
Charles.
-
Having edc’d a balance at work for the past 5yrs solid. Mine (green version) has virtually no paint left on. Typically I then read that the green version was supposedly the less common colour.
I grabbed a dark grey model last year in a sale. Today I thought I’d look for a green one too.
Found one, last in stock, reduced to £30
Just been informed it has already been dispatched
Really pleased I scored both colours.Another late addition to the Gerber collection.

-
Glad you got them, and after reading about your good experience with it for the past five years, "better late than never". Pictures when you get them!

-
@Juan el Boricua said:
Glad you got them, and after reading about your good experience with it for the past five years, "better late than never". Pictures when you get them!

The dark grey version is somewhere in the loft ??
But I’ll definitely upload a picture of the green version next to the one I’ve carried for the past 5yrs.
My user has amazing patina -
@tosh said:
Having edc’d a balance at work for the past 5yrs solid. Mine (green version) has virtually no paint left on. Typically I then read that the green version was supposedly the less common colour.
I grabbed a dark grey model last year in a sale. Today I thought I’d look for a green one too.
Found one, last in stock, reduced to £30
Just been informed it has already been dispatched
Really pleased I scored both colours.Another late addition to the Gerber collection.

I thought you were done collecting :D
-
I am
But the Balance has earned my respect, despite earlier misgivings.I’ve never once shown it any love whatsoever. But yet when it mattered it tried its best. Hard not to respect that.
I’ll be sad when it eventually breaks or gets lost. Both the new ones are just for collection. I may look for another yet, as a back up for my user.The Balance tweezers have never, not EVER failed to work. They are utterly amazing.
-
My brand newBalance arrived today
I’m so pleased I managed to get another Green version.
Here’s a few pics of my new green balance next to my edc green balanceSee if you can spot the difference...




-
One is new and the other is old .
-

But...it appears also that the lock button is shaped differently; the older has kind of a bar in the middle, while the newer is rounded?
Also, the "Balance" on the newer is "double lined"/ wider and the one of the older is thinner type.

Anyhow, great tools, and glad you're able to enjoy them.

-
I found out the other day that you can order a new Gerber Balance directly from China via AliExpress.
https://www.aliexpress.com/item/1005002241560136.html
Charles.
-
I bought it. Probably counterfeit. But quality is good!
-
-
Counterfeit is the wrong word, more like unauthorized. It's a fun little tool. I feel a little bad buying it but I don't see any genuine ones anywhere.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login