One Man Army - Show your Soldiers
-
My Soldier finally came in. It was in worse condition than I anticipated judging from the photos, so it took me a while to get it back into shape. Awl had a bent and broken tip, can opener was blunt, wire stripper the same. Blade was full of scratches and really dull. Scales had some kind of blackish film on them. You get the point :ahhh I guess that means the previous owner used the hell out of it, so I won't have any issues doing the same



-
You’ve done a good sprucing that ‘82 up - looks lovely now, SVL!

-
@SirVicaLot said:
You get the point :ahhh I guess that means the previous owner used the hell out of it, so I won't have any issues doing the sameBut I bet you’ll look after it better
-
@SirVicaLot said:
My Soldier finally came in. It was in worse condition than I anticipated judging from the photos, so it took me a while to get it back into shape. Awl had a bent and broken tip, can opener was blunt, wire stripper the same. Blade was full of scratches and really dull. Scales had some kind of blackish film on them. You get the point :ahhh I guess that means the previous owner used the hell out of it, so I won't have any issues doing the same


Great clean up job SirVic

I got a M61 from 1980 recently that could do with a really good clean and blade polish, be interested to hear your method

Recently got an excellent result using WD40 and a wire brush on an LM Supertool that was in poor nick when I got it, definitely very interested on how you remove the blade scratches particularly
-
I love coming to this thread. So much eye candy. Great to see new acquisitions.

-
My '96 Soldat was the same way Sir V. The nice thing is that you can actually use it for a knife. My '67 and '06 are too nice to actually use like they were designed to. Yours looks great!
Aloha! -
@Echotech said:
Great clean up job SirVic

I got a M61 from 1980 recently that could do with a really good clean and blade polish, be interested to hear your method

Recently got an excellent result using WD40 and a wire brush on an LM Supertool that was in poor nick when I got it, definitely very interested on how you remove the blade scratches particularly
I start out with a bath in warm water and soap. Leave it in there for a while so the crud gets loose. After that I use a variety of brushes and clean it under running water. I mostly use an old tooth brush and a new drain cleaner brush. Those get in between the layers really well.
In this case though that wasn't enough to remove that black film on the scales. I had to use a brass brush to remove that.After that I dry it and apply WD-40 generously, to get the water out. Then I wipe it down, trying to get as much WD-40 out as possible. A few drops of food safe dry lube and the snap is back

I used a Dremel with polishing attachments from this set to work on the tools and remove the major scratches:

I did not remove all the scratches or polish it to mirror finish. That would not have been true to the character of this knife. It is clearly a user and has the scars to show it, so there was no point in trying to bring them back to mint condition.
-
@SirVicaLot said:
I start out with a bath in warm water and soap. Leave it in there for a while so the crud gets loose. After that I use a variety of brushes and clean it under running water. I mostly use an old tooth brush and a new drain cleaner brush. Those get in between the layers really well.
In this case though that wasn't enough to remove that black film on the scales. I had to use a brass brush to remove that.After that I dry it and apply WD-40 generously, to get the water out. Then I wipe it down, trying to get as much WD-40 out as possible. A few drops of food safe dry lube and the snap is back

I used a Dremel with polishing attachments from this set to work on the tools and remove the major scratches:

I did not remove all the scratches or polish it to mirror finish. That would not have been true to the character of this knife. It is clearly a user and has the scars to show it, so there was no point in trying to bring them back to mint condition.
Thanks SirVic

I’m going to have a go at mine soon and will bear your advice in mind.
I do similar things but don’t have a dremel and agree it would be out of character to polish too much

-
My Mod 1908’s
Wenger Delemont 32 (Variant 2)
Elsener Schwyz 41 (Variant 2)
Wenger Delemont 43 (Variant 2 with arsenal repair stamps)
Elsener Schwyz 43 (Variant 3)And what I assume is a civilian model, Wengerinox “Wenger Delemont Swiss Made” with brass liner
Would like a Variant 1 (nickel plated liner) and a “P” model to round it out






-
You’ve been busy, Echotech!!

-
Wenger Delemont 32 (Variant 2)
Elsener Schwyz 41 (Variant 2)
Wenger Delemont 43 (Variant 2 with arsenal repair stamps)
Elsener Schwyz 43 (Variant 3)And what I assume is a civilian model, Wengerinox “Wenger Delemont Swiss Made” with brass liner
Would like a Variant 1 (nickel plated liner) and a “P” model to round it out

Nice old soldiers. Hope you'll find the 2 you need soon and make your collection complete

-
Very cool M08's, Echotech. I love those knives.
-
Well, at last I have a blank escutcheon M61, a Wenger ‘88 (would prefer a Vic, but I can wait for a good one now) to complete my set of 8 (ignoring the CCW vertical W-K stamp from the early 70s, but again, I can wait for that!) M61s covering the external variations. Here they are front and back, and then in their storage case with duplicates and BYSAKs



-
@Rizio Il Ghiro said:
Well, at last I have a blank escutcheon M61, a Wenger ‘88 (would prefer a Vic, but I can wait for a good one now) to complete my set of 8 (ignoring the CCW vertical W-K stamp from the early 70s, but again, I can wait for that!) M61s covering the external variations. Here they are front and back, and then in their storage case with duplicates and BYSAKsSuperb collection Rizio

-
Cheers, Echotech!
Myron’s blog was a great inspiration for this collection - helped add to the SAKWIKI info fo me! 
-
Very nice collection you have there, Rizio!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

Thanks Rizio