Gerber Mr. Pinchy Multi Plier Club
-
@ReamerPunch said:
Could an MTO wizard please post a link to the post that lists all the different versions of MrPinchy?
Your wish is my command:
/post/928733There is also a later Mr Pinchy badged as "FISKARS" (not "GERBER") that has the giant awl.
-

I saw the Fiskars one in Chako's episodes thread.
Why is the MP evolution not a sticky?

-
@ReamerPunch said:

I saw the Fiskars one in Chako's episodes thread.
Why is the MP evolution not a sticky?

Because it's in the middle of another thread .
-
It probably should be in this thread

@gregozedobe said:
I copied much of the following info from a earlier post on MTo (possibly by Bob ? ), with revisions and additions from looking at various Mr Pinchies (and some assumptions on my part). Naturally any errors/omissions are my fault. If anyone has any corrections and/or extra info please speak up (eg which versions were made with a BO finish). Sorry, I can't do photos. I hope this helps out all those interested in the development of gerber's (in)famous "Mr Pinchy".**EARLY GERBER MULTI-PLIERS ("Mr Pinchy") **
Gerber kept making small changes to their Multi-Plier throughout the 1990's, so we tend to see a lot of subtle variations. Some were stamped and sold with the Fiskars logo, and at least some of these had slightly different tool loads (Fiskars owned Gerber at that time). At some stage Gerber started making a BO finish available, as well as the much more common bead blasted SS finish. Here's a summary of the main steps along the way:
Version 1) The very first models had a high-polish finish, instead of the bead blast we've seen on Gerber tools since. It also had button-head screws in all four blade pivot points, and button head screws on the plier slides. Also note the pivot bushing between the plier jaws. A crude pair of scissors was included, and a VERY thick Lanyard clip. The very first run of Multi-Pliers were etched with “FIRST PRODUCTION RUN” (a.k.a. “FPR” ) on one handle.
V1.0 FPR
V1.1 One handle cut-out, mis-matched nail nicks (don’t line up with cut-outs)
V1.2 One handle cut-out, matched nail nicks
V1.2 Two handle cut-outs, matched nail nicksAll ? “PATENT PENDING”
Version 2) The second version went to the now-familiar bead blast finish. The scissors were replaced by a big triangular shaped awl. This version still has button head pivots, button head sliders, and the pivot bushing between the plier jaws. The pliers had slightly beefier jaws with a squarer shape, while the lanyard clip was slimmed to a more “normal” thickness.
V2.0 “PATENT PENDING”
V2.1 “U.S. PATENT NO 5142721”Version 3) This version wasn't much of a change really. They simply did away with the pivot bushing.
All ? “U.S. PATENT NO 5142721”
Version 4) Changes: On one side of each handle, the button head screw was replaced with a round nut, while a file replaced the large awl.
V4.0 “U.S. PATENT NO
5142721/5142844” NB The 5142844 # was possibly an error, as later versions all used 5212844.V4.1 “ U.S. 5142721
PATENT 5212844
PAT PEND”**Version 5) ** This introduced a new, even beefier shape to the blunt nose plier jaws, and needle nose jaws were offered for the first time as well. Gone were the button head slider screws, replaced by two different sizes of round-headed rivets.
All ? “U.S. 5142721
PATENT 5212844
PAT PEND”At this point Gerber stopped with the minor evolutions of the Multi-Plier (Mr Pinchy) and came out with a major overhaul. Called the Multi-Lock when it first hit the market, the new tool had all-locking blades, plastic sliding lock releases, unique blade-pivot screws, the now familiar little circlip spring steel slider clips, etc.
After a while this tool became the 600-series Multi-Plier (MP600), with all its many tool component and plier type configurations. The very first ones were also stamped "First Production Run" (FPR).
All ? “U.S. 5142721
PATENT 5212844
PAT PEND” NB This is stamped inside the handle, not externally as before (and in a very small font).This information was last updated by gregozedobe on 5 August 2014
-
Greg
Oh, if you're thinking of letting go of your valuable collection
, please give me the detailed information. I would like to put your collection on my chart.
(For the time being, please tell me about your V1 collection.)Please fill in the following items like <u>scrounger did before.</u>
[list type=decimal]
-
Surface finishing:
-
Plier head:
-
Nail mark position:
-
Handle cutout:
-
Unique tool:
-
Lanyard ring:
-
Patent Marking:
-
Font:
-
Can opener claw:
-
Gap between handles:
-
Joining methods:
-
Ruler:
Sorry to trouble you, but I would like to keep a record of your rare collection.

-
-
Greg
Oh, if you're thinking of letting go of your valuable collection
, please give me the detailed information. I would like to put your collection on my chart.
(For the time being, please tell me about your V1 collection.)Please fill in the following items like
[list type=decimal]
- Surface finishing:
- Plier head:
- Nail mark position:
- Handle cutout:
- Unique tool:
- Lanyard ring:
- Patent Marking:
- Font:
- Can opener claw:
- Gap between handles:
- Joining methods:
- Ruler:
Sorry to trouble you, but I would like to keep a record of your rare collection.

I'll have to think about that. It would be a lot of work as I have around forty v1.x Mr Pinchies. Maybe if I only documented one of each of the different variants (I have a lot of duplicates) ?
-
Greg
Thank you for replying.
Wow, I never imagined you had so many collections.
As many as around forty in v1.x Mr Pinchies!?
w(゚ロ゚;w(゚ロ゚)w;゚ロ゚)w :ahhhIt's hard for you to do it all, so please tell me the rare v1.x models. p(・ω・*q)
-
I am thinking of starting a new thread with this information, and include pictures of as many versions as I can, so we can have a reference guide detailing the evolution of MrPinchy with pictures. Since I only have one version, I would be reposting pictures originally taken and shared by other members. I am new to MrPinchy, compared to other members, so I do not want to step on anyone's toes and make the thread. Even though it will be a valuable resource, it feels wrong for me to simply copy/paste other people's hard work and make the thread. So if anyone wants to make the thread, please say so.
-
@ReamerPunch said:
I am thinking of starting a new thread with this information, and include pictures of as many versions as I can, so we can have a reference guide detailing the evolution of MrPinchy with pictures. Since I only have one version, I would be reposting pictures originally taken and shared by other members. I am new to MrPinchy, compared to other members, so I do not want to step on anyone's toes and make the thread. Even though it will be a valuable resource, it feels wrong for me to simply copy/paste other people's hard work and make the thread. So if anyone wants to make the thread, please say so.Feel free to copy/paste anything I've written, as long as it stays within MTo and appropriate acknowledgement is given to the author I'm happy
:) I don't have the energy to create a full reference Mr Pinchy thread myself, but am willing to contribute. -
What is that microscopic pivot screw size? Could they not use a larger Allen size?

-
A special thanks to Greg for helping me out on this one


-
@McStitchy said:
A special thanks to Greg for helping me out on this one

Nice example!!

-
@McStitchy said:
A special thanks to Greg for helping me out on this one

Nice color contrast.

-
(´-`).。oO( It's been a while since I revised the chart last time. )
Since then, I've gotten some unique Mr. Pinchys.
I will introduce them, Unidentified Pinchy Objects, and revise the chart in a few days. σ(^0^ )As <u>ReamerPunch said</u>, it may proper to post new thread. Oh, but it is difficult for me because I (and my assistant Google translation) are not good at English. So I hope ReamerPunch would make new thread of Mr. Pinchy timeline. Please feel free to use my posts and data.
Until then, please forgive me to post UPOs in this thread. ( ><)Before that, I will repost Mr. pinchy component catalog again.
I revised a little, but it is almost same as I posted <u>before</u>. Please right click to download.
I also put same pdf version catalog, small file size, at the end of this post.By the way, I found one of Mr. Pinchy on ebay.
The seller is describing their item as “Version 2.0 with M1 Patent mark, has unique tool the Awl, P2 Jaws/Pliers".
I'm glad the seller read this thread, and referred to my post.
But, hey dear seller, this chart and term is not common knowledge. You may need to guide folks to M.T.o. ヽ(´▽`) -
Thank you hiraboo for these updates.

This information is most valuable for collectors and clearly shows the variations.
I agree that this should be added as a new tread sticky so it will always be easy for people to find in the Gerber forum.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




RP