Let me see your homemade sheaths!
-
@McStitchy said:
Nice progress JR
That look all great to me
Thanks, I’ll be getting a red farmerX for Xmas, and along side it a Zermatt sheath w/steel, the same kind my grandfather introduced me to over 30yrs ago! And I think that farmerx is going to be my new must carry, so unless they come out with something even more perfect besides my custom I’ll be good on sheaths well maybe if I find a nice pancake for the farmerx, which that black one should fit,,
JR -
You want a flashlight with it, or not?
:D -
@McStitchy said:
You want a flashlight with it, or not?
:DIdk, maybe, I just haven’t found that perfect flashlight,,
JR -
@SirVicaLot said:
Very functional, great work!
It sure is, thanks!
@McStitchy said:
Excellent work Kotty
Thanks!
@MadPlumbarian said:
Very nice job! And very true, I bought a super cool flashlight was waaay more powerful then a aa maglite, and I liked combo sheaths, only problem was my sheath wouldn’t fit it, so the night I got home I spent like 4hrs making that one way to the left, not the best but it worked, it held what I needed, the wife was mad cause I had work the next day and I was up till like 12am, I so wanted a leather sheath but knew nothing about them nor did I have money to buy a custom one, so I looked into it and made that next piece of junk, very ugly but then again it worked, learned a few things and liked the concept of a pancake, so that’s what I went with, so I made the middle one, that middle one had to have seen a good 5yrs of field work, was even in my accident, the last two I just decided to make because I was bored, the last is for my sak, but the unique thing about that one is it’s not dyed with like rits, I found some way with I think vinegar and rust, stunk like wow, I kept it in the window between the window and the screen to get it to lose some of the stench, before moving to the next step and assembling it, I’ll admit there not the best looking but they did the job and I kept learning!!
JRThanks! And the same to you!
[It's not failure if you learn something from it]
-
Here's mine! It works well with a 108mm GAK and a Minimag Flashlight.

-
Looks great!
[It's not failure if you learn something from it]
-
@Barry Rowland said:
Here's mine! It works well with a 108mm GAK and a Minimag Flashlight.That looks great Barry

... is that from the set you've got for Christmas?
-
A couple of homemade belt sheaths for my Fieldmaster and Forester. The bigger Forester sheath has a space in the back for two DMT sharpening cards and loops for a ferro rod and aaa flashlight. The two sheaths are wet formed and stitched up with the inner strands of paracord and both are treated with bees wax to seal. They both have great retention.

-
Here’s another of my creations. Both the knife and sheath. The knife is made from O1 tool steel with a handle made from Cocobolo. Flat ground with a cold blue finish to give it the patina look. The sheath is made as a scout carry with a ferro rod incorperated. Right hand draw.


-
Wow... awesome work Tinner

-
@McStitchy said:
Wow... awesome work Tinner
Thanks McStitchy

-
I’ve been working on one but kinda been busy, I even came up with my own stamp, took a bolt and did some work because I wanted something unique and not just a J.R. I wanted something of my own symbol and I’ve joined my JR together now for idk how long? So there my first attempt, I kinda like it,, the sheath, ahh, I’m not to thrilled,,
JR

-
Looking great JR

... looking forward to the finished product

-
That stamp is cool.
I may have to steal your idea and try my hand at making my own. -
@Tinner said:
That stamp is cool.
I may have to steal your idea and try my hand at making my own.Believe it or not it wasn’t hard, well, if you have a Dremel/rotary tool,
The hard part was
1, finding a bolt, I had to run out to the freezing garage, I found one but it was all old and rusty, but I turned around and saw a box and there were 4 brand new one in it and I was like SCORE

2, then making the layout, cause it has to be backwards, so I drew it with a marker on a piece of paper, once I got the just right I circled it and flipped the paper over, thus giving me the backwards layout,,
3, and lastly and the most annoying, matching the symbol to the paper, you’d get close and go over to the mirror to check, and naa, and of course marker doesn’t come off so you scribble really good all over the metal then wipe it really fast it comes right off! So after about 30min of fiddling I got a good match that I was pleased with,,The rest is fun, get the tool out and just don’t hit the marker! After its deep enough clean it up and your set, your suppose to stick it in a oven thingy and get it blazing red then dump it in water to harden it but I’m not using this thing to stamp metal, just leather.. so no point..
JR -
Thanks for the hints. Mine should be easy to make as my initials are MW. Upside down, backwards, forwards, same same lol. As long as I don’t get too fancy. I’m sure I’ll still find a way to mess it up.
-
@Tinner said:
Thanks for the hints. Mine should be easy to make as my initials are MW. Upside down, backwards, forwards, same same lol. As long as I don’t get too fancy. I’m sure I’ll still find a way to mess it up.Well the nice thing with the bolt is if you screw up you can just file it flat and do it over, but only one or two times,, getting into the M or W you might be better off with a very small square file and just work the angles / \ / \ util you get the letters made, because a rotary tools going to be round, unless you use a disk and cut like a saw,, all depends on how you want to make it?
//
//
//\//
////? Or something like this, it all depends on what you got going on, if you need any help or ideas don’t hesitate!
JR
-
When I mark my tools at work for identification I use M , with all the legs touching
WI do like the overlapped version you drew though. What are you using to press it into the leather? Arbour press? I have one, but it is rather large, that I use for pressing out bearings and such on my ATV.
-
@Tinner said:
When I mark my tools at work for identification I use M , with all the legs touching
WI do like the overlapped version you drew though. What are you using to press it into the leather? Arbour press? I have one, but it is rather large, that I use for pressing out bearings and such on my ATV.
So something like this? To stamp the mark? I just hit the bolt with a hammer, or do you mean to make the sheath?
JR
-
@MadPlumbarian said:
So something like this? To stamp the mark? I just hit the bolt with a hammer, or do you mean to make the sheath?
JRYes, like that minus the horizontal line. Two diamonds side by side.
And yes, to stamp the mark. I have seen a few videos with guys putting their makers mark on leather products with a stamp in an arbour press. I just assumed that there was a requirement to hold pressure on the stamp for a bit to set the image. If whacking it with a hammer works, well, I am a pro at hitting stuff with hammers lol.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login