Got Paracord?
-
@kottskrapa said:
It's tested and strong enough [emoji846] thought about a closed one at first but this did the trick. I can pull quite hard without it opened and there is not much load with the carrier so there is no worries[It's not failure if you learn something from it]

-
<a href="https://flic.kr/p/2jBkfFe" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50282948227_7efde825f2_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
No paracord, but was replacing some bootlaces, and figured one of the old ones would make a serviceable scarf woggle.

-
Sometimes it's nice to go back to were I started with paracord.
Gutted cobra lanyards.
<a href="https://flic.kr/p/2jmWEsH" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50120109717_ff4b97462a_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
My old smaller key chain sanitizer grenade has pretty much seen it’s days, so I made a new one, a little bigger so don’t have to keep refilling it so many times and easier to do so,, anyway, here’s the new paracord wrapped hand sanitizer grenade,, just have to put a clip on and all done..
JR
-
Nice. I've gone back to carrying a hank of cord. This is a great way to carry both.
-
<a href="https://flic.kr/p/2jWktnx" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50498004357_08dc21bd84_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>paracord wallet lanyard by [url=https://www.flickr.com/photos/138056053@N03/]
-
Some paracord projects i’ve done.

-
Nice Tinner!

JR -
Thank you!

-
How’s this, I pulled out all scrap pieces and came up with enough to make this, a set of paracord worry beads..
JR

-
Nice color combination

-
Nice paracord work Tinner.
I like what you did there Mad P.
-
Thanks,, it was just a little something..
JR -
@MadPlumbarian said:
Thanks,, it was just a little something..
JR
-

JR -
@PeaceInOurTime said:
There's a lot of great stuff there! Is that rifle a Chiappa Little Badger? And what is behind the trigger?Thanks PIOT!
Yep, that’s a Chiappa Little Badger. It had no picitinny rails so I repurposed a Tapco gas tube cover for a SKS on the top of the barrel so I could mount an optic and made a bottom foregrip from a piece of sectioned plastic pipe. Behind the trigger I mounted a small section of Pic rail to fashion a grip as they are absent on these little rifles. I added some rail covers (I believe they are UTG brand) to make it a more comfortable grip. Very nice in the hand now. There is a rail cast into the rifle in that spot but it isn’t picitinny or Weaver and accepts no conventional grips so I rigged up my own. I also relieved a bit of material from the bottom of the lever that opens the chamber and made a slot in the bottom of my homemade foregrip so that it folds as small as possible. There is a loop of paracord that secures the rifle when folded. I had an old shotgun buttcuff that was fraying so I cut and glued it to form a more comfortable cheek rest that also boasts some storage space inside basically forming two pockets as well as three of the shell loops on the outside. I’ve drilled out the peep site to a larger diameter and filed down the front site and added a piece of fibre optic tube to the top of the post. Finally, I whipped the barrel with paracord and wove around the butt and grip.
-
Another paracord project. A set of Ranger pace beads pictured with my two SAK Rangers of course

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login