2 layer vs 3 Layer SAK
-
@Jim the Brave said:
Which brings me back to thinking, you know, I really would like to have my different tools split up onto different knives. To where, for instance, a Deluxe Tinker would make a great companion for my Ranger. One in each pocket. And so on.I’d love to have a SC minus the blade and opener layers to pair with my fave two layer knives. Aside from the redundancy, mass, and bulk, the SC’s outside layers are dead cumbersome to use.
-
In fact if you could take out the scissors, too, it's easy to grab a Super Tink or a Climber to go with.
-
@Simon_Templar said:
Incidentally, adding a Classic or Manager to the keyring fixes the aforementioned problems and makes two layer SAks perfectly viable.I know this is a popular option, but having tried it myself, I found it to have a couple of significant drawbacks:
-
The 58 mm scissors, while excellent for their size, are not the equal of the 91 mm scissors.
-
Carrying a knife on my key ring meant that I either had to use that knife with a wad of keys hanging off the end of it, or take the extra time to remove the knife from the key ring before using and reattach after using.
-
-
@nate j said:
I know this is a popular option, but having tried it myself, I found it to have a couple of significant drawbacks:- The 58 mm scissors, while excellent for their size, are not the equal of the 91 mm scissors.
- Carrying a knife on my key ring meant that I either had to use that knife with a wad of keys hanging off the end of it, or take the extra time to remove the knife from the key ring before using and reattach after using.
Similar experience here. I hate to admit it, but a LM Micra has worked much better for me in this regard. I carried it on an S-biner for a while, but I had issues with it getting twisted and stuck. Now I keep it (off the keys) in my jacket pocket.
-
@nate j said:
I know this is a popular option, but having tried it myself, I found it to have a couple of significant drawbacks:- The 58 mm scissors, while excellent for their size, are not the equal of the 91 mm scissors.
- Carrying a knife on my key ring meant that I either had to use that knife with a wad of keys hanging off the end of it, or take the extra time to remove the knife from the key ring before using and reattach after using.
I agree having it all on a 91/93 mm SAK is king. It just won't have two layers

-
@Simon_Templar said:
I agree having it all on a 91/93 mm SAK is king. It just won't have two layers

-
@Simon_Templar said:
I agree having it all on a 91/93 mm SAK is king. It just won't have two layers

-
My solution to the “tool removal” issue from a key ring passed unresolved through regular key rings, pull and twist to open key rings, key caddies, sprung carabiners and sprung carabiners with o-ring locks.
It was a dark time of my life!
Like Mick J, I couldn’t get no satisfaction.
If it was easy to get the key or tool off, it came off accidentally. BAD!
If it was too hard, key/tool removal was annoying and untimely. WORSE!
Issue resolution came with a triangular ring that has a gap and a screw tube closing and opening a gap on one side.
No accidental openings.
Quick, easy intentional openings for removal of key or tool.
Works for me.
Your mileage may vary.
-
Regarding the holy grail of 3 layers in a two layer knife, I believe it can be done by Swiza’s approach to scissors.
But Swiza is not recognizing it yet.
Swiza scissors are essentially two large blades facing each other that scissor together to cut.
There is no reason these blades cannot be designed to work independently as knife blades and together as scissors.
Once designed this way, then the spine of the locking blade blade can be machined for can opener function. The tip of non locking scissor blade can be machined for can opener function.
The old GAK combined functions on the blade successfully.
Aitor makes a 2 layer knife with a skeletonized multi function blade that is very good.
The trick is to combine multi function blades with Swiza’s scissor approach.
-
@SgtTowser said:
Regarding the holy grail of 3 layers in a two layer knife...The Vic Compact is actually a really good effort in this vein. I just personally can't get on with the combo tool vs. the opener layer, and like having both large and small blades.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
, 

