Pocket Tool Chest Microlight
-
The PTC has become my favorite small SAK. I’m glad you brought this one back to life.
-
One more tidbit for those that don't know. Unlike (most?) Victorinox, Wenger does not have you push the shield to turn on the light. In fact, the light is on the opposite scale. Wenger just has a little raised symbol molded in the scale to guide you where to push. It looks like a headlight symbol from a car.
Also for those interested, the batteries go in/out via a little drawer in the scale above the screwdriver. When you open the drawer, with the screwdriver pointed to the left and the light/drawer on the top, the battery on the LEFT has its NEGATIVE (-) side up. The battery on the RIGHT has its POSITIVE (+) side up. This information is not commonly mentioned! It took me a while to get it.
Here is another picture showing the light symbol, the drawer, the battery orientation, and the tiny cleaning tool I used.

-
I had to remove corroded batteries from my Microlight Esquire once. Was it from being left for years unattended? Nope. The knife had been wedged under a car seat (fell out of shorts) for over a year, and the batteries were fine. I left it in a 90-degree camping tent for a day and a half (pack's backup knife), and the batteries exploded. I had to pop the scale off, put alcohol on the contacts, liner, and less sensitive parts of the circuit board to clean things up, and then reassemble it. But, the work was successful; and I've been on the same set of replacements (I think these were Duracell, not Renata--I don't think I bought a Renata battery until I bought my first 91mm LED) for almost five years now!
I'm really wanting to find a MicroLight Pocket Toolchest. The combo is really good and then adding that small LED makes it even better. For most small jobs, that LED is enough and keeps extra junk out of my pocket. For many, many years (from 2012, when I bought the knife until about 2016-2017
-
Actually, if you look closely at the battery drawer on the PTC you'll notice that the two slots have a tapered shape, with the wider opening on opposite sides so you shouldn't be able to insert batteries in the wrong orientation. The flip side of this is that each time you open the drawer one of the batteries falls to the ground

-
@ComboTool said:
Actually, if you look closely at the battery drawer on the PTC you'll notice that the two slots have a tapered shape, with the wider opening on opposite sides so you shouldn't be able to insert batteries in the wrong orientation. The flip side of this is that each time you open the drawer one of the batteries falls to the ground
Both of my batteries fell out at once, but then I did find the holes were conical when putting new ones in. The original batteries may not have been to spec size wise, I suppose. I wish I knew that part before searching for instructions for so long! I didn't want to fry anything by doing it incorrectly.
-
My orange one

-
Oooooo...orange...
-

I found one. It should be here tomorrow.
-
Nice - green scales!
Enjoy! -
PTC and a light? What's not to love :ahhh

-

I love the PTC w/light, but there is one way it could be improved upon (in my opinion), is to use the light from a newer Victorinox.
The light in the PTC does work nicely for a dimmer light. It's possible dimmer light is more ideal in certain circumstances, I'm just partial to the output the newest Victorinox generation. -
I have a new Midnight Manager that puts out, for its size, a respectable beam. -
@pipedreams said:
I found one. It should be here tomorrow.Nice find pipedreams!

-
A lucky find too!
-

The Green PTC Microlight came today. Boy, LED technology has come a looooong way! The light is pretty anemic. I might try a new set batteries.
-
. New batteries never hurt. Those could even be the originals 
-
To you Wenger microlight owners: I've got two and one of them has a very weak light (as in, you have to look into it to see it's on, definitely useless as a light source). It's not a battery problem, when I switch for new batteries (that give plenty f light with the other one) the problem remains. Is this a known problem, is there a known fix or should I just give up and replace the scales with regular ones?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login