What Traditional Knife are you toting today?
-
@SgtTowser said:
Case cuts.I’ve got one like it in a reddish brown.
Never understand why some persons say Case makes knives for collectors and not for knife users. Mine always cut like crazy. And the cutting density of Cases (i.e., the inches of cutting edge per inch of handle) is always impressive compared to the modern one blade wonders that makers make because the profit margins are way higher, especially when made with Ugyuar slaves.
God bless case.
Wish they would make some serious competitors for SAKs though. I’d buy one for sure.
P.S.; I understand that CASE is no longer the old Case. But no other knife company is the old Case either. Not even GEC and they are trying and building fine knives, too. But this business of building one knife at a time in quantities that sell out quick aka planned scarcity, is not really a fair comparison of GEC and Case. Case still makes knives you can buy whenever you want one. They do not get nearly enough strokes for that. This short batching is what an America past its industrial prime has to resort to. Better than nothing, but not truly the same.
All and all can’t go wrong with a case[emoji2]
Sent from my iPhone using Tapatalk
-
Good day Gentlemen

Sent from my iPhone using Tapatalk
-
Very nice colt !

-
Barlows appear the ur-compact, pinned pocket knife.
GEC gave it one of the best modern interpretations!
Daddy Barlows often do not measure up to the basic stubby Barlow. They violate the compactness.
But GEC gets all the surfaces right and makes it work.
Good scales on your TC.
Somewhere between bone and and the light passing through it. An alchemical effect. Pre 1880s painters had the time and assistants to create incomparable lacquered oil paintings. Interest based reserve currency and industrial mass production rendered the economy that permitted the old master craftsmen painters and replaced them with impressionist fast food painting that replaced endless lacquer if for luminosity in paintings with quick pigment and globby plein aire brush strokes. Mass media and robber baron art speculators and Edward Bernays PR flacks manipulated minds and markets to forget the master craftsman tradition. Impressionism and modernism signaled the Great Coarsening 1.0 of western culture—the loss of light captured and orchestrated in the lacquering, and the replacement of it with opaque “color” globs that reveal only one band width, if you will, and so intensify hue but kill luminescence.
Your scales have luminescence. Bone scales were one of the few Industrial Age artifacts that perpetuated craftsman modulating luminescence (light passing through a layer of organic material) for pleasurable human visual perception AND touch. But then materials science and usury combined to make bone not competitive on a mass scale. A few makers stuck to bone but most shifted to opaque metals and plastic composites. Case persisted. Queen hung on and passed. Others migrated to cheapies from China. Canal tried to revive but could not survive. GEC has found a formula for the time being.
Young Americans now seem not to love these bone scale wonders enough to do much more than buy the cheapest that the Chinese can make. It’s sad about the light of bone scales. The Chinese are recovering and accruing the industrial and artful mastery to build GREAT bone scale knives and now the western markets have lost their spending power and desire to afford what the Chinese craftsman could do. China is, after all. the ur culture and forgot more about artful craftsmanship after the destabilization of the Qing Dynasty by the British East India Company, than we in the West likely knew in total!
But even this tenuous situation for luminescence in knife artifacts seems on transitional life support.
The digital age has brought hyper reality; i.e., digital modeling by CAD and prototyping by first CAM and then 3D printing to knives so that the authentic original artifact never exists in the first place. This luminescence itself is now doomed to hype real simulation in mass production. One might even argue mass production itself is now being imitated.
I do not know, if GEC is real or hyper real in its design and prototyping, because I do not know how they proto type their knives.
But your scales, at least. seem authentic. It seems like someone at GEC, or at their subcontractor, knows about crafting bone scales to do more that tolerate pinning and torching. The scales on your knife seem crafted by a human eye. Maybe not. I am increasingly easily fooled in old age by digitally machined and by 3D printed and hewn items. If the Israeli’s can 3D print a steak from protein layering, GEC could build up calcium layered scales, I reckon.
But the luminescence of your knife’s scale look real to me in our age of hyper real and out right fakery and through the filter of digital photography I view them through.
I am hardly the only knife-isti grappeling with hypermodernity first mapped out by Jean Baudrillard late last century. A fellow at EVERYDAYCOMMENTARY.COM has written recently in an informative way about it regarding a GIANT MOUSE Riv knife.
But I am recently oil painting and learning the differences in luminescence management; i.e., light refraction through a layered media vs light reflection off an opaque pigment, so I focus on the nuanced luminescence in bone scales of your GEC vs the monochromatic, even polarized reflection of green off the plastic handle of a Spyderco Salt with an LC200N blade. Both are wonderful knives, and I am as much a sucker for bold, monochromatic hue as the next, but how BEAUTIFUL and warm and luminescent the scales on your knife are. I want for knife users not to lose that luminescence of carefully processed bone the way oil painting lost the luminescence of laborious lacquering...if possible.
I like your knife.
-
posted the wrong picCamillus 4 line Stockman and a TC Barlow

-
Verah nice pair of knives. Sure to make your pockets happy!

-
Must be TC Barlow Thursday. With a Cattle knife thrown in. :D
-
Great pics!
-
Spoiler:
Barlows appear the ur-compact, pinned pocket knife.GEC gave it one of the best modern interpretations!
Daddy Barlows often do not measure up to the basic stubby Barlow. They violate the compactness.
But GEC gets all the surfaces right and makes it work.
Good scales on your TC.
Somewhere between bone and and the light passing through it. An alchemical effect. Pre 1880s painters had the time and assistants to create incomparable lacquered oil paintings. Interest based reserve currency and industrial mass production rendered the economy that permitted the old master craftsmen painters and replaced them with impressionist fast food painting that replaced endless lacquer if for luminosity in paintings with quick pigment and globby plein aire brush strokes. Mass media and robber baron art speculators and Edward Bernays PR flacks manipulated minds and markets to forget the master craftsman tradition. Impressionism and modernism signaled the Great Coarsening 1.0 of western culture—the loss of light captured and orchestrated in the lacquering, and the replacement of it with opaque “color” globs that reveal only one band width, if you will, and so intensify hue but kill luminescence.
Your scales have luminescence. Bone scales were one of the few Industrial Age artifacts that perpetuated craftsman modulating luminescence (light passing through a layer of organic material) for pleasurable human visual perception AND touch. But then materials science and usury combined to make bone not competitive on a mass scale. A few makers stuck to bone but most shifted to opaque metals and plastic composites. Case persisted. Queen hung on and passed. Others migrated to cheapies from China. Canal tried to revive but could not survive. GEC has found a formula for the time being.
Young Americans now seem not to love these bone scale wonders enough to do much more than buy the cheapest that the Chinese can make. It’s sad about the light of bone scales. The Chinese are recovering and accruing the industrial and artful mastery to build GREAT bone scale knives and now the western markets have lost their spending power and desire to afford what the Chinese craftsman could do. China is, after all. the ur culture and forgot more about artful craftsmanship after the destabilization of the Qing Dynasty by the British East India Company, than we in the West likely knew in total!
But even this tenuous situation for luminescence in knife artifacts seems on transitional life support.
The digital age has brought hyper reality; i.e., digital modeling by CAD and prototyping by first CAM and then 3D printing to knives so that the authentic original artifact never exists in the first place. This luminescence itself is now doomed to hype real simulation in mass production. One might even argue mass production itself is now being imitated.
I do not know, if GEC is real or hyper real in its design and prototyping, because I do not know how they proto type their knives.
But your scales, at least. seem authentic. It seems like someone at GEC, or at their subcontractor, knows about crafting bone scales to do more that tolerate pinning and torching. The scales on your knife seem crafted by a human eye. Maybe not. I am increasingly easily fooled in old age by digitally machined and by 3D printed and hewn items. If the Israeli’s can 3D print a steak from protein layering, GEC could build up calcium layered scales, I reckon.
But the luminescence of your knife’s scale look real to me in our age of hyper real and out right fakery and through the filter of digital photography I view them through.
I am hardly the only knife-isti grappeling with hypermodernity first mapped out by Jean Baudrillard late last century. A fellow at EVERYDAYCOMMENTARY.COM has written recently in an informative way about it regarding a GIANT MOUSE Riv knife.
But I am recently oil painting and learning the differences in luminescence management; i.e., light refraction through a layered media vs light reflection off an opaque pigment, so I focus on the nuanced luminescence in bone scales of your GEC vs the monochromatic, even polarized reflection of green off the plastic handle of a Spyderco Salt with an LC200N blade. Both are wonderful knives, and I am as much a sucker for bold, monochromatic hue as the next, but how BEAUTIFUL and warm and luminescent the scales on your knife are. I want for knife users not to lose that luminescence of carefully processed bone the way oil painting lost the luminescence of laborious lacquering...if possible.
I like your knife.
Thanks !

-
-
Oregon Trapper and a Churchill

-
Epic week of gear Gentlemen !!
Sent from my iPhone using Tapatalk
-
Whittler and a Barlow
-
That's a nice pair of oldies buddy , really like the Whittler !

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


