Dutch Army Knives
-
@EMZ said:
Two more DAK acquisitions:-
RNLAF multi-tool of Chinese quality.
-
RNLAF knife made by Metallo. "Vouwmes" = Folding Knife. It was distributed to RNLAF computer and communications technicians/mechanics ("Communication and Information Systems - CIS"). It has a Dutch, NSN 5110-17-031-3972.
Both knives were bought with the help of Agamemnon. Thank you again!

@Echotech said:
Got my first DAK to add to the Soldier collection.
In pretty decent condition and for about the same price as a new Pioneer. Got an AMEFA on the way too

Congrats!

@Myron said:
I call dibs on Glenfiddich's new DAKs on behalf of EMZ! :)
If I ever decide to sell them, i'll think of EMZ first

-
-
Congrats!


If I ever decide to sell them, i'll think of EMZ first

Thanks Glenfidd!!
And now something completely different.
A Dutch Army promotional set, consisting of well made Chinese multi-tool and LED flashlight. -
And one more promotional item from the Dutch Army.
It's a nifty item! After you engage both fork and spoon, the two halves detach and can be used seperately.Text on the pouch reads: "landmacht. BANENWINKEL ARNHEM. plus telephon number.
Landmacht = Army
Banenwinkel = 'Job Shop' (recruitment center)
Arnhem = City in the east of the Netherlands.The Netherlands Army had several recruitment center in larger cities, but all had to close in late 2009 because of budget cuts. That dates this multi-tool before 2010.
-
I have that one.
It is the Swisstool Spirit BS and there is the Dutch Lion Stamped on the leather.It is pictured in the Book "Das Schweizer Soldatenmesser". There is a small section for the Dutch Knives.

-

2021 - the year of the strange knives.
This week I received a new acquisition: an unmarked knife that looks a lot like the Amefa knives with brown fiber grip.
The knife belonged to a Dutch ex-soldier who was drafted in 1949 and got this knife with his equipment.The story behind the knife:
On 19-09-1931 Eugen Hollaender (a German) founded the Apeldoornsche Messenfabriek NV Haagse Import Maatschappij Olanda (Apeldoornse Knife factory NV The Hague Import Company Olanda). This would later become Amefa. He initially produced razors and in the 1940s switched to kitchen knives and pocket knives, which he supplied to the Dutch and German army.
Hollaender's application for naturalization, which he submitted at the same time as his marriage in 1937, got stranded in the bureaucracy during the German occupation. So he still had the German nationality and therefore he could sign a contract with Germany. The knives he made were therefore also used in the German Wehrmacht. The knife was made until WWII.
After the war, the Hollaender family was placed under a trustee. This arose from a general measure against companies that were run under the German flag during the occupation. Hollaender was also, immediately after the liberation of Apeldoorn, because he was a German, imprisoned in the Willem III barracks in Apeldoorn. There he sat together with other Germans and NSB (National SoSmurfpillst Movement in the Netherlands) members.
In the 1950s he was neutralized as a Dutchman.
The knife, most likely made by "Olanda" and probably served as an "example" for the DAK that was made by Amefa and used after the war. Because of this, the later Amefa's and this knife have (almost) the same configuration.

.jpg)

-
Great story, Agamemnon!
I didn't know Amefa was estahblished by a German who's name was Hollaender. What a coincidence.
After consulting the internet this morning, I read that during WW2 Amefa produced knives and razor blades for the German army, but that Hollaender was also anti-German, and helped the local resistance, risking his own life. That's why he was honoured in 2011 by giving his name to a street in Apeldoorn: the Hollaenderstraat. -
@EMZ said:
Great story, Agamemnon!
I didn't know Amefa was estahblished by a German who's name was Hollaender. What a coincidence.
After consulting the internet this morning, I read that during WW2 Amefa produced knives and razor blades for the German army, but that Hollaender was also anti-German, and helped the local resistance, risking his own life. That's why he was honoured in 2011 by giving his name to a street in Apeldoorn: the Hollaenderstraat.
Thanks EMZ.For the local resistance and the old forced laborers, Hollaender and his wife are seen as Oskar Schindler (“Schindlers List”) of Apeldoorn.
-
2021 - the year of the strange knives.
This week I received a new acquisition: an unmarked knife that looks a lot like the Amefa knives with brown fiber grip.
The knife belonged to a Dutch ex-soldier who was drafted in 1949 and got this knife with his equipment.The story behind the knife:
On 19-09-1931 Eugen Hollaender (a German) founded the Apeldoornsche Messenfabriek NV Haagse Import Maatschappij Olanda (Apeldoornse Knife factory NV The Hague Import Company Olanda). This would later become Amefa. He initially produced razors and in the 1940s switched to kitchen knives and pocket knives, which he supplied to the Dutch and German army.
Hollaender's application for naturalization, which he submitted at the same time as his marriage in 1937, got stranded in the bureaucracy during the German occupation. So he still had the German nationality and therefore he could sign a contract with Germany. The knives he made were therefore also used in the German Wehrmacht. The knife was made until WWII.
After the war, the Hollaender family was placed under a trustee. This arose from a general measure against companies that were run under the German flag during the occupation. Hollaender was also, immediately after the liberation of Apeldoorn, because he was a German, imprisoned in the Willem III barracks in Apeldoorn. There he sat together with other Germans and NSB (National SoSmurfpillst Movement in the Netherlands) members.
In the 1950s he was neutralized as a Dutchman.
The knife, most likely made by "Olanda" and probably served as an "example" for the DAK that was made by Amefa and used after the war. Because of this, the later Amefa's and this knife have (almost) the same configuration.
Excellent write up and pics Agamemnon, what an interesting story

-
Received this AMEFA KL79 today, thanks to HankGreen on the MT’s for sale forum
Closer in quality to the VIC than I was expecting, not quite as well finished, particularly noticeable with the pins but not bad at all




-
My mind has been expanded. Did not know of DAKs. Have a GAK, but have to hunt for a DAK.
The old ones have blade pivots pretty reminiscent of Pradel
-
@Echotech said:
Received this AMEFA KL79 today, thanks to HankGreen on the MT’s for sale forumCloser in quality to the VIC than I was expecting, not quite as well finished, particularly noticeable with the pins but not bad at all





Hi Echotech,
Nice Amefa KL 79 congratulations on your new acquisition – looking good.As can be seen in the photos, this is the 4-piece version. (2nd version). There is however also a 3-piece version (1st version).
The KL72, KL73, KL74 & KLU74 was a 3-part pocket knife, stainless steel with ribbed aluminum body. Folding knife, bottle opener / wide flat screwdriver and flat awl. The years "72," 73 and "74; do not have a can opener. (P-38 - Can Opener - NSN 7330-99-549-6287).This was provided separately. In addition, the bottle opener was on the same side as the blade.
In addition to the KL (army variant), a KLU (air force) knife was also provided in 1974. From 1975 the 2nd type was introduced, with 4 parts. These knives all had brass liners. The first two production years were 1975 and 1976. In 1977 no production took place. In the following years the KL78, KL79, KL80, KL81 and KL 82 were released.
Amefa produced this series up to and including 1982 and finally once more in 1984. In 1983 and the years after 1984 Victorinox became the supplier. During this period Victorinox started a lawsuit against Amefa for patent evasion. As a result, Defense was obliged to buy only from Victorinox.
-
@Agamemnon said:

Hi Echotech,
Nice Amefa KL 79 congratulations on your new acquisition – looking good.As can be seen in the photos, this is the 4-piece version. (2nd version). There is however also a 3-piece version (1st version).
The KL72, KL73, KL74 & KLU74 was a 3-part pocket knife, stainless steel with ribbed aluminum body. Folding knife, bottle opener / wide flat screwdriver and flat awl. The years "72," 73 and "74; do not have a can opener. (P-38 - Can Opener - NSN 7330-99-549-6287).This was provided separately. In addition, the bottle opener was on the same side as the blade.
In addition to the KL (army variant), a KLU (air force) knife was also provided in 1974. From 1975 the 2nd type was introduced, with 4 parts. These knives all had brass liners. The first two production years were 1975 and 1976. In 1977 no production took place. In the following years the KL78, KL79, KL80, KL81 and KL 82 were released.
Amefa produced this series up to and including 1982 and finally once more in 1984. In 1983 and the years after 1984 Victorinox became the supplier. During this period Victorinox started a lawsuit against Amefa for patent evasion. As a result, Defense was obliged to buy only from Victorinox.
Very informative

Never knew about that lawsuit!
-
Another probably experimental/proposal/test model DAK: The Victorinox Forester OH with 'Interservice' logo.
I bought this one also for a very reasonable price from the same seller as Glenfiddich bought his two rare models (see earlier posts). -

looks good EMZ - congrats

-
Agamemnon wrote: "The years "72," 73 and "74; do not have a can opener. (P-38 - Can Opener - NSN 7330-99-549-6287).This was provided separately. In addition, the bottle opener was on the same side as the blade."
These can openers came with our combat rations (gevechtsrantsoenen'). One in each C-Rat.
After reading Agamemnon's post I realized I still had one of these old timer combat rations lying around somewhere. Well, luckily I found it, but the quality of the contents had detoriated over the years. Especially the tin can with 'Kaas, Korstloos' (= Cheese, Crustless) is in a bad, leaking condition. But this ration dates around 1978!
I guess I have to open it one day and remove the very rotten content...Included some pictures of the Macaroni & Ham ration + the can opener in its plastic pouch (originally the pouch was made of laminated paper-plastic-aluminium, but many years ago I packed the contents in clear plastic.)
The can opener is hiding between the green toilet paper and the chewing gum. See the red arrow.
-
Back on topic with this promotional Dutch air force pocket knife!
Text on revers side: Bindingsdag 2003 (= binding/interconnecting day 2003).
Tang stamp is 'Stainless Steel' which factually means 'China'. -
@EMZ said:
Back on topic with this promotional Dutch air force pocket knife!
Text on revers side: Bindingsdag 2003 (= binding/interconnecting day 2003).
Tang stamp is 'Stainless Steel' which factually means 'China'.Epic 👍
I half expect wings to pop out and it to transform into a nano drone!!!
Are these scarce?
My neighbor is a pilot and would love one of these!
The top pick is actually reminiscent of a cargo/tanker!

-
@Agamemnon said:

Hi Echotech,
Nice Amefa KL 79 congratulations on your new acquisition – looking good.As can be seen in the photos, this is the 4-piece version. (2nd version). There is however also a 3-piece version (1st version).
The KL72, KL73, KL74 & KLU74 was a 3-part pocket knife, stainless steel with ribbed aluminum body. Folding knife, bottle opener / wide flat screwdriver and flat awl. The years "72," 73 and "74; do not have a can opener. (P-38 - Can Opener - NSN 7330-99-549-6287).This was provided separately. In addition, the bottle opener was on the same side as the blade.
In addition to the KL (army variant), a KLU (air force) knife was also provided in 1974. From 1975 the 2nd type was introduced, with 4 parts. These knives all had brass liners. The first two production years were 1975 and 1976. In 1977 no production took place. In the following years the KL78, KL79, KL80, KL81 and KL 82 were released.
Amefa produced this series up to and including 1982 and finally once more in 1984. In 1983 and the years after 1984 Victorinox became the supplier. During this period Victorinox started a lawsuit against Amefa for patent evasion. As a result, Defense was obliged to buy only from Victorinox.
excellent write up thanks for that, always interesting to understand some of the history behind them
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login