Mad Max Challenge
-
@FolderBeholder said:
Day 1The Giants.
Nice Giant trio FB!

-
@Barry Rowland said:
Just one of these exceeds the weight and size limits on most US highways
I can offer transportation if anyone needs a ride

@Barry Rowland said:
In the spirit of SAK creativity, can I enter this beast?
. Just kidding! We got hit with some car repairs that sidelined my Super Max purchase. I'm really going to enjoy following you all, my friends! :D
Please do! Hope the car repairs didn't get too expensive.@Simon_Templar said:
Day 1Well, looks as if I am the one to open this challenge. I am going to do it with surgery: the Mickey Mouse scales of my XLT had to go. Given that the XLT is not a discreet SAK by any means, I decided to slap happy yellow scales on my new EDC. I have to say I am quite pleased with the result.
Other than that, I noticed that the exposed part of the Cybertool driver has darkened quite a bit since I last used the XLT in Comis' Stack Challenge of last year. Looks like some kind of oxidation to me. Balistol didn't have any effect, so for the time being I guess I just have to live with it.
As I had already noticed in last year's challenge (see above), the XLT remains on the right side of "big" (if only just), meaning that I for one can both handle it and carry it in my jeans pocket. Granted, you notice it's there, but it neither pulls down your pants nor does it feel overly uncomfortable in the pocket.
So my XLT and I are off to a good start, it seems. I doubt I will have many occasions to test the true potential of this SAK during the challenge, but I will look out for opportunities of course.
Nice scales swap, that's gonna be one of the more creative use of the Lego separator. :D

I used the mini-screwdriver on my XLT to tighten the screw on my glasses
Good use, part of the reasons why I always prefer corkscrew over backside philips.

-
@guibur said:
Nice pics guys!!

I'm not participating here (I already am in 30 day Framer X challenge) but I'll be hanging out!

Hope to participate in this challenge in the next months, being the luky owner of XLT & XAVT.The day is still young, never too late to jump ship.
;)@FolderBeholder said:
Day 1The Giants.

-
<u>Day 1</u>
The challenge opens strong with all the heaviest weights of SAK lineup!

Never put my giant on a balance, might as well give it a try today. A wooping 1.33kg(2.93lb)! This is one tool/knife I will always move my feet if I happen to drop it.

I read one of the original intent for building Wenger Giant is to shop case many of the Wenger tools in 85mm/similar chassis. One being the blade from the Wenger Soldat Standard Issue(probably one of the few, if not the only Alox made by Wenger). And since the Soldat is in 93mm format and has a longer blade, the tip of the blade does protrude from the Giant chassis and so handling the tool does need extra care. -
Comis, ours vary a little in tool assortment. I think there are 3 or 4 variations.

Do you have the card for yours that lists the tools? Here is mine.
-
The challenge opens strong with all the heaviest weights of SAK lineup!

Never put my giant on a balance, might as well give it a try today. A wooping 1.33kg(2.93lb)! This is one tool/knife I will always move my feet if I happen to drop it.

I read one of the original intent for building Wenger Giant is to shop case many of the Wenger tools in 85mm/similar chassis. One being the blade from the Wenger Soldat Standard Issue(probably one of the few, if not the only Alox made by Wenger). And since the Soldat is in 93mm format and has a longer blade, the tip of the blade does protrude from the Giant chassis and so handling the tool does need extra care.The XLT is really minimum carry compared to this beast.
-
@FolderBeholder said:
Comis, ours vary a little in tool assortment. I think there are 3 or 4 variations.
Do you have the card for yours that lists the tools? Here is mine.I do, let me take the photo in the morning, it's a little too dark to take a good photo of it. The format of the certificate is a little different, maybe we have different vintage years? That's gonna be an interesting comparison, since I have heard they are built by only a few handful of folks in Wenger, and I wonder do they always build it the exact same way each time.
-
@FolderBeholder said:
Day 1The Giants.

-
I read one of the original intent for building Wenger Giant is to shop case many of the Wenger tools in 85mm/similar chassis. One being the blade from the Wenger Soldat Standard Issue(probably one of the few, if not the only Alox made by Wenger). And since the Soldat is in 93mm format and has a longer blade, the tip of the blade does protrude from the Giant chassis and so handling the tool does need extra care.
Damn, that looks like an easy way to cut yourself even if you are just toying around with that beast. I wonder what this blade tip will do to your pocket when you carry the knife around

-
@Simon_Templar said:
Damn, that looks like an easy way to cut yourself even if you are just toying around with that beast. I wonder what this blade tip will do to your pocket when you carry the knife around :pok:I will probably call Barry and arrange transportation. :D
-
@comis said:
Nice scales swap, that's gonna be one of the more creative use of the Lego separator. :D
I found SAK outer linings to be very soft and prone to scratches and dents when using screwdrivers as levers to get the scales of. It doesn't really matter given that the liners are hidden under the scales. Nevertheless, I nowadays prefer to continue with the brick separator once the scale has come off the first pivot.
-
@FolderBeholder said:
Comis, ours vary a little in tool assortment. I think there are 3 or 4 variations.
Do you have the card for yours that lists the tools? Here is mine.Cool list FB!

-
:rofl: Anytime!!
@comis said:
I will probably call Barry and arrange transportation. :D
Mad Max Challenge
Just one of these exceeds the weight and size limits on most US highways I can offer transportation if anyone needs a ride
Multitool.Org Forum (multitool.ninja)
-
Day 01
XLT and friends. Have also a Workchamp XL which sits in its box somewhere around here.

-
Day 1
Phillips Screwdriver and Spatula combo to remove the door and batteries from my daughters toy
XLT coming in handy as always!!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
