Mad Max Challenge
-
We need a
coke spoonspatula badge. -
@Simon_Templar said:
I found SAK outer linings to be very soft and prone to scratches and dents when using screwdrivers as levers to get the scales of. It doesn't really matter given that the liners are hidden under the scales. Nevertheless, I nowadays prefer to continue with the brick separator once the scale has come off the first pivot.
I gonna give that a try sometime!XLT and friends. Have also a Workchamp XL which sits in its box somewhere around here.
That's a fleet of heavyweights!

@SDDToolCo said:
Day 1Phillips Screwdriver and Spatula combo to remove the door and batteries from my daughters toy
XLT coming in handy as always!!
I've found having little ones running around house provide many opportunities for SAK use. :D
-
@FolderBeholder said:
Comis, ours vary a little in tool assortment. I think there are 3 or 4 variations.
Do you have the card for yours that lists the tools? Here is mine.FB, here is the tool list and the certificate I got for my Giant:


-
<u>Day 2</u>

Used one of the hex key on Giant to put the scales back onto my Becker after stripping it. I was surprised I found one that fit, it's not a small hex, 9/64" or 1/8" IIRC.
-
@Simon_Templar said:
It's hard to understand why the XLT is not flying off the shelves
It's the ultimative, still carriable SAK...
-
DAY 2
I used the inline Phillips screwdriver to tighten a screw on my cupboard door.
-
General question for all XLT-users here: Do you also use the in line Philips? Or just the cybertool?
-
@Simon_Templar said:
Looks tight - did you manage a full turn? Due to its placement in the middle(-ish) of the XLT, I vastly prefer the Cybertool driver for driving screws with that SAK.I did mange a full turn and the inline Phillips screwdriver is larger than the Cybertol driver and it is the exact size of the screw in my cupboard.

-
@FolderBeholder said:
Thank you comis. So our two only differ on tool #32.Yes, indeed! I was just playing with the 'fabric cutter' and am wondering whether it is a mini size pizza cutter or a leather cutter. But fabric does make sense.
But I think Laser Pointer is really cool, definitely more high tech and makes it even more 'valuable'.

-
Would you mind holding your Giant in your hand(s)? I'm trying to get a perspective on the size. Thanks!
-
Beckers are cool knives!

Thanks! I think for chopper knife, Becker's value is hard to beat.

@Simon_Templar said:
There are detachable parts? Feels like cheating to me...
But if I use it with the entire tool, wouldn't that make me a nincompoop not knowing how to detach the tool when I can? Gonna choose the lesser evil here. :D@ulzhan said:
General question for all XLT-users here: Do you also use the in line Philips? Or just the cybertool?I'm with Vicman here, and also depends on whether I am using the off hand to support the tool while doing the screwing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
