Rust prevention help
-
@David Bowen said:
Does anyone else have an issue with rust on their knife blades and handles? I must have toxic sweat and oily digits because I am always having to remove small dots of rust trying to get a foothold on my blades with a moderate polish or bead blasting. Any ideas on what I can do to combat this besides using a very fine scotch pad like I currently do? I am thing about something like Tuff Cloth but I want some opinions before I get some.Are they Carbon steel knives, or Stainless? If they are carbon, I would let them get their natural patina. It'll darken and gain some natural rust protection. People always talk about rust on carbon steel, but it's not really a big deal. A little wipe down at night is all it needs to be ok. I mean, think about this. Sailors have been carrying carbon steel knives for thousands of years, and they lived in a salt water environment. Their knives never rusted away and disappeared. Sure, a little surface rust will appear, but who cares. Just wipe it off with a bandana. Same for Stainless as well. Highly acidic sweat will do that to a knife. I have the same problem. However, like I said, just wipe it down and it's good to go. We love our knives, so a little maintenance shouldn't be a problem.
-
I know somebody might disagree with me, but I spray some wd40 on my multitools and knives then wipe until its not so slippery anymore for me it helps a lot.
-
A little oil is always a good choice.
Got a Sog powerlock recently, comes with a leather sheath, instruction book recommends not leaving in leather sheath as this can accelerate rusting process :P
-
No Latinoheat, they are steel that are anything from S30V to Sandvik 14C28N (I think I got that right...it's the new kershaw steel). I do try to oil and keep an eye on them, this humidity lately is killing me, going to be a 100 degrees tomorrow not including the heat index. :( I do have some carbon in a few slipjoints and in a BHK Tiger Knapp, they do pretty good as long as they are looked after as well.
-
@duckman1975 said:
I know somebody might disagree with me, but I spray some wd40 on my multitools and knives then wipe until its not so slippery anymore for me it helps a lot.naw, it's not a bad thing, it helps! it's just not the best thing to use. lotsa stuff out there for
long term/harder conditions, easier maintenance (and more expensive!) ;) -
I use the Tuff cloth on my knives and multitools and no rust yet. Have you thought about using a knife with H1 steel? Heard that doesn't rust at all.
-
Another hint I read about is placing a desiccate packet in with your knifes/MT's. These absorb moisture, and should help with your problem.
-
-
I'm with Duckman, I routinely spray my multis down with WD-40.
I've done this with my tools for years, I just soak the entire tool drawer, it's always served me well and it certainly can't hurt.When a multi get actually wet I do a more thorough wipe down, and for that I use a Light oil.
My family thinks WD-40 is a cologne.
-
I love the smell of WD40. :D
-
I use Tuf Glide and WD40 only after a good rinsing :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login