Mad Max Challenge
-
<u>Day 6</u>


Knife maintenance day. Used the magnifier to check out the grind evenness and tang stamps of some of more recently acquired Traditionals, and am surprised how high the magnification power of the older mag glass.
-
@Hevy (CT-782) said:
That's a really great challenge!See the giant opening a coffee packet was a great view!
That's a humongous SAK!
Enviado de meu moto g(6) usando o Tapatalk
Indeed, and since some of the blades do protrude the chassis, gonna be careful how I hold onto that chassis so I won't accidentally cut myself. :D@FolderBeholder said:
Day 6
Vacationing in Jersey.
Looks like the Giant is enjoying its vacation! -
It made it into general baggage?! :D
@FolderBeholder said:
Day 6
Vacationing in Jersey. -
-
@FolderBeholder said:
Day 6
Vacationing in Jersey.Does it have a hook?
-
@FolderBeholder said:
I'd look for a hook, but I can't get the Giant out of his favorite bar and grille.Time for a new badge: It hangs without a hook.

-
@Simon_Templar said:
But I suppose you have to sharpen it for that, right?Nope, it works right out of the box.
-
@FolderBeholder said:
I'd look for a hook, but I can't get the Giant out of his favorite bar and grille.Nice pic FB!

-
@FolderBeholder said:
I'd look for a hook, but I can't get the Giant out of his favorite bar and grille.@ulzhan said:
Time for a new badge: It hangs without a hook.

@Simon_Templar said:
Cool, I will have to try that. I assumed the fish scaler was to too thick and too dull to pierce fries, but admittedly I never tried it out.While talking about the hook and scaler, the covid edc tool was somewhat popular last year, and I always think it's just an imitation for the backside hook or the fish scaler on SAK. :D

-
Day 6
Had to make a patch cable and wanted to see how the electrician blade worked out with the extra layers of the XLT
Normally I like using a two or three layer SAK for this because I can gently close the large blade on the cable and strip the jacket off by rotating the tool which works great
I was pleasantly surprised with the electricians blade because the groove was perfect for the cable but the only thing I observed is that it works a lot better if I opened the bit driver and magnifying glass layers in order for the cable to lay flat on the tool making it much easier to rotate the tool

-
@SDDToolCo said:
Day 6Had to make a patch cable and wanted to see how the electrician blade worked out with the extra layers of the XLT
Nicely done SDD!

-
@SDDToolCo said:
Day 6Had to make a patch cable and wanted to see how the electrician blade worked out with the extra layers of the XLT
Normally I like using a two or three layer SAK for this because I can gently close the large blade on the cable and strip the jacket off by rotating the tool which works great
I was pleasantly surprised with the electricians blade because the groove was perfect for the cable but the only thing I observed is that it works a lot better if I opened the bit driver and magnifying glass layers in order for the cable to lay flat on the tool making it much easier to rotate the tool
Good use! Your post peak my curiosity and I brought out my XLT to play--

My Electrician blade is sandwiched between the scissors and spatula, and the bit driver only after the spatula. And mag glass layer is all the way out next to the openers.
I am curious do our tools have different orientation of layers? And does this happen randomly or done on purpose? I am sure most tools/chassis I have seen always have the same orientation due to nail nicks and ease of use.
-
@SDDToolCo said:
Day 6Had to make a patch cable and wanted to see how the electrician blade worked out with the extra layers of the XLT
Normally I like using a two or three layer SAK for this because I can gently close the large blade on the cable and strip the jacket off by rotating the tool which works great
I was pleasantly surprised with the electricians blade because the groove was perfect for the cable but the only thing I observed is that it works a lot better if I opened the bit driver and magnifying glass layers in order for the cable to lay flat on the tool making it much easier to rotate the tool
Interesting and good to know. Did those extensions affect the handling negatively?
-
@comis said:
Good use! Your post peak my curiosity and I brought out my XLT to play--
My Electrician blade is sandwiched between the scissors and spatula, and the bit driver only after the spatula. And mag glass layer is all the way out next to the openers.
I am curious do our tools have different orientation of layers? And does this happen randomly or done on purpose? I am sure most tools/chassis I have seen always have the same orientation due to nail nicks and ease of use.
As far as I know there are the same layers on every XLT out there.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
