Scale tools - 4th opening
-
Hello and good night to all.
Has anybody thought of some tool for the 4th opening on the Vic scale?
I thought of putting the fire ant fire starter in place of the toothpick and move it to the place of the 4th opening, but it does not fit.
Best would be to find a fire starter that fits the tweezer place, and then buy a small tweezer for the 4th opening.
Any ideas?
-
@Elquebraley said:
Hello and good night to all.Has anybody thought of some tool for the 4th opening on the Vic scale?
I put a shortened Firefly with the head reshaped and modified to glow blue.
I thought of putting the fire ant fire starter in place of the toothpick and move it to the place of the 4th opening, but it does not fit.
You could probably mod the toothpick to fit, but it would be quite a bit shorter.
Best would be to find a fire starter that fits the tweezer place, and then buy a small tweezer for the 4th opening.
Did that too. Just gotta mod/reverse the head orientation. I used epoxy and glow powder.
Any ideas?
Pen slot. Make your own ferro rod to fit it. I think there are rods available to fit the stock slot. Again, I’d use epoxy and glow powder to form the head.
I think I posted some pics in the FireAnt thread in the SAK forum and maybe comis’ glow mod scale thread in this forum.
-
@kamakiri said:
Yeah, I forget that the internet doesn’t believe anything without pics!Post in the glow scale thread is
HereThis is in the back tweezer slot cut open in a Champion Plus and the other is in a white Spartan PS.
Thanks, but my question was more about the 4th opening. You got T&T, pen... what's the 4th one?!

-
@pfrsantos said:
Thanks, but my question was more about the 4th opening. You got T&T, pen... what's the 4th one?!

I believe that Champion Plus has a Firefly in the 4th slot.
-
@pfrsantos said:
I didn't made myself clear (as usual). What I meant was "what are the 4 slots?"- Toothpick
- Tweezers
- Pen
- ??? (do you count the pin, under the corkscrew?!)
Ah, I see.
It's the ultra secret slot on the back scale of some (not all) SAKs. Older scales do not have the slot:

You can see it on the top left of the photo. The slot is not opened except on the Voyager et al.
-
This slot, oposite to the other two?

Enviado de meu moto g(6) usando o Tapatalk
-
@Hevy (CT-782) said:
This slot, oposite to the other two?
Enviado de meu moto g(6) usando o Tapatalk
Thanks! This pic illustrates it perfectly. I'll have to check my SAKs, don't remember seeing this.

Edit: Yup, there it is, in a translucent scale. Do regular celidor scales have this, too? Or just the translucent ones?
-
@pfrsantos said:
Thanks! This pic illustrates it perfectly. I'll have to check my SAKs, don't remember seeing this.:cheers: :salute:
Edit: Yup, there it is, in a translucent scale. Do regular celidor scales have this, too? Or just the translucent ones?
I believe that only plus scales have It. Both celidor and translucent.
Bellow a link for a Felix Immler video:
-
@pfrsantos said:
Thanks! This pic illustrates it perfectly. I'll have to check my SAKs, don't remember seeing this.

Edit: Yup, there it is, in a translucent scale. Do regular celidor scales have this, too? Or just the translucent ones?
I'll never post a pic in order to illustrate something to you ever again ;)
-
@Hevy (CT-782) said:
I believe that only plus scales have It. Both celidor and translucent.Bellow a link for a Felix Immler video:
So, the 4th slot is a 3rd slot... why not have a 2nd slot in the other scale, to make a 5th slot? It would be less crowded.
:think: :think:
-
@pfrsantos said:
So, the 4th slot is a 3rd slot... why not have a 2nd slot in the other scale, to make a 5th slot? It would be less crowded.

The forth slot is meant to be used in SAKs that have the watch on the front scale. When you have the watch, there's no way to fit the tweezer, so these models come with the 4th slot open, and a shorter tweezer there.
If you have a SAK without a watch and with plus scales, the 4th slot will be closed, but its simple to open it.
Cheers
-
@Reinier said:
I'll never post a pic in order to illustrate something to you ever again ;)
3rd back slot, 4th if you exclude the pin. Thanks again for explaining anything better than I do Reinier!
But the rear slot is for the Electronic scales, so that the short tweezer can be used there. Not sure in the exact year of introduction, but I think after 2000, when the plus scales were still ‘solid’, without all the modern reinforcing ribs found in the ‘hollow’ scales.
Reinier will explain anything I missed. 😉
-
But there are no electronic cellidor front scales so why the extra slot on the back?
-
@kamakiri said:
Like anything Victorinox does, it’s about production efficiency. Both scales share the same interior injection mold. Saves on tooling costs.That"s actually what I had typed and then deleted. Becaude I sort of doubt it. The molds can not be identical since on cellidor the slot is still closed

Oh well :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



