What's your latest SAK?
-
What a lovely post
.DAVZELL you keep at it. Glad you've got back into the workshop. I've said it before but let me say it again, SAKs are more than just a pocket full of solutions. They as we see here are about community. They are about finding a purpose beyond just hobby. They are about friendships. They are talking points and puzzles. I am glad you are here at MTO with us.
-
Keep your chin up, Dave, we've totally got your back here. You have a lot to live for, and we're really glad to have you part of our community.

-
@DavZell said:
Lyme disease, undiagnosed for over 20 years, affects me greatly. I have a degree in industrial management and computer science from Purdue and had an excellent career. By my late 40's, I was wracked with pain, had issues with muscle control, and worst to me, began losing my executive functions and at times I have trouble reading, understanding people, and finding words to speak. We thought I was having strokes (actually, TIA's) as well. As an IT manager, consultant, and senior manager, I could no longer work. I've been suicidal to the point of intervention three times. Finding hobbies that work with my challenges has been challenging and cyclical. Some too expensive for Soc Sec Disability, some bad for fine motor skills, some frustrating when you can't always read. I've found SAKs let me move between "hunting," reading, modding, and sometimes, just sitting and going through them.I can relate to finding solace in going through my SAK collection and just admiring what I enjoy about each one.
I'm rather worried about Lyme disease with the surge in ticks in my area (eastern Ontario in Canada). People are getting them in suburban areas, even, let alone anywhere beyond. It makes me rather stressed about going into the woods, and my skin doesn't much like being out in the open sun (I'm medium-rare in minutes). It's also very difficult to see ticks on me because I have so many small freckles that look just like them. That's one of the reasons I value having an SAK with the magnifying glass, so I can try to inspect for them. It's too bad because it's put a damper on most of the outdoor activities that I loved. I would love to see a scale-stored tick removal tool of some kind, perhaps. I know Swiza makes a tick removal SAK.
Anyway, I hope you are well and I'm glad you are part of the community here.
Thanks for sharing your story. -
Have used Permethrin on my hiking/camping clothes for a few years now with great results. I am a magnet for anything that bites. Take me on your next outdoor trip and be sure no bugs will bother you. I always wear long sleeve shirts and pants when out because I know any exposed skin will be a dinner bell to bugs that bite.
I spray my tent and pretty much everything that can be sprayed. As for my skin, I am using an essential oil mix that seems to also be working. Lemon Eucalyptus oil, peppermint, and oregano seems to do a good job at any exposed skin. I think the treated clothing however is my real defense.
While not everyone can tolerate the use of chemicals which I understand or the environmental impact, we can still enjoy the great outdoors using layers of protection.
-
@Aloha said:
Have used Permethrin on my hiking/camping clothes for a few years now with great results. I am a magnet for anything that bites. Take me on your next outdoor trip and be sure no bugs will bother you. I always wear long sleeve shirts and pants when out because I know any exposed skin will be a dinner bell to bugs that bite.I spray my tent and pretty much everything that can be sprayed. As for my skin, I am using an essential oil mix that seems to also be working. Lemon Eucalyptus oil, peppermint, and oregano seems to do a good job at any exposed skin. I think the treated clothing however is my real defense.
While not everyone can tolerate the use of chemicals which I understand or the environmental impact, we can still enjoy the great outdoors using layers of protection.
I litterly just finished spraying both me and the wifes hiking stuff!!!
Man.. Talk about timing... 
-

If it bites I'm getting bitten :ahhh. We had what seemed like a massive mosquito problem a few years back which is when I began looking for something other than spraying myself with chemicals. We live near an open preserve and have lots of horses, opossum, raccoons, mice, rats, birds, and a lot more running about. I was out watering my lawn when I heard the buzz of mosquitos zeroing in on me :ahhh. Before I could get into the house I was mauled.
Fleas love me as well so with all the wildlife I want to protect myself from that as well. Having my shoes, socks, pants, shirts, hats, gloves, and all other clothing treated with permethrin keeps me safe. I just need to add a bit of protection to my exposed skin which is done my the oils. I have no problem using chemicals but for now the oils seem to do the trick.
-
If it bites I'm getting bitten :ahhh. We had what seemed like a massive mosquito problem a few years back which is when I began looking for something other than spraying myself with chemicals. We live near an open preserve and have lots of horses, opossum, raccoons, mice, rats, birds, and a lot more running about. I was out watering my lawn when I heard the buzz of mosquitos zeroing in on me :ahhh. Before I could get into the house I was mauled.
Fleas love me as well so with all the wildlife I want to protect myself from that as well. Having my shoes, socks, pants, shirts, hats, gloves, and all other clothing treated with permethrin keeps me safe. I just need to add a bit of protection to my exposed skin which is done my the oils. I have no problem using chemicals but for now the oils seem to do the trick.
We have a very bad mosquito problem here in eastern Ontario. It's been so bad the past few years that they've started spraying some of the area waters to reduce it.
I have a friend who put some kind of garlic extract stuff around the perimeter of his wooded property and he says it's made the world of difference. If you wander past it though, the mosquitoes will pick you up and fly you away, though. :ahhh
-
:ahhh
-
Thank you for the kind words. I spent half the day in the workshop today. I made a marking knife from scratch. I designed it and cut it from a 1/2in by 18in piece of steel. Then I made a bocote handle for it, attached it, and did the final shaping and finishing. My wife seemed very happy. I haven't done anything like this in at least a year and a half, probably more like two to two and a half.
To stay on topic, I got my first Ranger-size knife yesterday. It's the RangerGrip 73, the Gardener. It's the one I posted about being on clearance for 1/2 off.
Here is a picture of the marking knife in case you are interested. Sorry it's a bit out of focus, but I did include the cat...

-
@DavZell said:
Thank you for the kind words. I spent half the day in the workshop today. I made a marking knife from scratch. I designed it and cut it from a 1/2in by 18in piece of steel. Then I made a bocote handle for it, attached it, and did the final shaping and finishing. My wife seemed very happy. I haven't done anything like this in at least a year and a half, probably more like two to two and a half.To stay on topic, I got my first Ranger-size knife yesterday. It's the RangerGrip 73, the Gardener. It's the one I posted about being on clearance for 1/2 off.
Here is a picture of the marking knife in case you are interested. Sorry it's a bit out of focus, but I did include the cat...

Looks good! Was it up to the cat's standards?

-
@DavZell said:
Thank you for the kind words. I spent half the day in the workshop today. I made a marking knife from scratch. I designed it and cut it from a 1/2in by 18in piece of steel. Then I made a bocote handle for it, attached it, and did the final shaping and finishing. My wife seemed very happy. I haven't done anything like this in at least a year and a half, probably more like two to two and a half.To stay on topic, I got my first Ranger-size knife yesterday. It's the RangerGrip 73, the Gardener. It's the one I posted about being on clearance for 1/2 off.
Here is a picture of the marking knife in case you are interested. Sorry it's a bit out of focus, but I did include the cat...

Wow...Very nice work! I love that wood.
Now remind us what the use and distinction of a marking knife is? -
Just received this Cadet 2018 which was missing in my collection.

I already have the Pioneer from 2018 (bought it in 2018) but I don't have both Cadet and Classic.
The Classic should arrive by next week.The colour is really beautiful, I'm still in admiration even though I've seen it a million times with the Pioneer.

-
@pfrsantos said:
Hum... you should be delicious after a couple of hours in the hot sun...



-
A Blue Alox Bantam sold by SKS. Huck70 helped me out greatly with this purchase

(Feedback thread) /topic/86911
Here it is with the 2020 L.E. Pioneer for colour comparison purposes


-
@Jim the Brave said:
Wow...Very nice work! I love that wood.
Now remind us what the use and distinction of a marking knife is?A marking knife is used in the workshop for indicating the line on which you want to cut. Made from hardened steel, they can mark wood or metal. Because they have a sharp edge, they make a very thin line. If you look at the mark from a sharpie or a pencil, they leave lines that can be even a 1/16 inch wide. Especially with metal, that can be a huge variance in the size of the piece. The marking knife is flat on one side and beveled on the other. This allows you to run right up to the edge of a ruler or template, or other object with the flat side, making a more accurate mark; it is difficult to do that with a pencil or marker because their tips are offset from the portion that runs along the ruler. Also, depending on the material and lighting, pen and ink markings can be difficult to see. The scribed line from a marking knife is usually visible, forming a clear break in a reflective surface, for example. In wood, the scribed line can also help prevent tear out because the knife has already acted like a chisel, slicing the wood fibers along the desired line.
I hope this mini-lesson was helpful and interesting!
David
-
@DavZell said:
A marking knife is used in the workshop for indicating the line on which you want to cut. Made from hardened steel, they can mark wood or metal. Because they have a sharp edge, they make a very thin line. If you look at the mark from a sharpie or a pencil, they leave lines that can be even a 1/16 inch wide. Especially with metal, that can be a huge variance in the size of the piece. The marking knife is flat on one side and beveled on the other. This allows you to run right up to the edge of a ruler or template, or other object with the flat side, making a more accurate mark; it is difficult to do that with a pencil or marker because their tips are offset from the portion that runs along the ruler. Also, depending on the material and lighting, pen and ink markings can be difficult to see. The scribed line from a marking knife is usually visible, forming a clear break in a reflective surface, for example. In wood, the scribed line can also help prevent tear out because the knife has already acted like a chisel, slicing the wood fibers along the desired line.I hope this mini-lesson was helpful and interesting!
David
:ahhh

-
Iv got a Swiss Champ on its way to me from Amazon Prime tomorrow.
I'm feeling like a kid at Christmas, cant wait for it to arrive. -
@DavZell said:
Thank you for the kind words. I spent half the day in the workshop today. I made a marking knife from scratch. I designed it and cut it from a 1/2in by 18in piece of steel. Then I made a bocote handle for it, attached it, and did the final shaping and finishing. My wife seemed very happy. I haven't done anything like this in at least a year and a half, probably more like two to two and a half.To stay on topic, I got my first Ranger-size knife yesterday. It's the RangerGrip 73, the Gardener. It's the one I posted about being on clearance for 1/2 off.
Here is a picture of the marking knife in case you are interested. Sorry it's a bit out of focus, but I did include the cat...

Nice work!

-
@DavZell said:
A marking knife is used in the workshop for indicating the line on which you want to cut. Made from hardened steel, they can mark wood or metal. Because they have a sharp edge, they make a very thin line. If you look at the mark from a sharpie or a pencil, they leave lines that can be even a 1/16 inch wide. Especially with metal, that can be a huge variance in the size of the piece. The marking knife is flat on one side and beveled on the other. This allows you to run right up to the edge of a ruler or template, or other object with the flat side, making a more accurate mark; it is difficult to do that with a pencil or marker because their tips are offset from the portion that runs along the ruler. Also, depending on the material and lighting, pen and ink markings can be difficult to see. The scribed line from a marking knife is usually visible, forming a clear break in a reflective surface, for example. In wood, the scribed line can also help prevent tear out because the knife has already acted like a chisel, slicing the wood fibers along the desired line.I hope this mini-lesson was helpful and interesting!
David
Thanks, David! That's great. Probably my dad has one...he's a machinist as one of his occupations.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login