Fanning tools for display
-
Is there a "wrong" way to display the BO MINI

-
Maybe not
:D -
. I like all the ways knives and tools are photographed. I think whats important is in-focus photos. -
and sometimes after I take, edit and post a pic, I notice they are blurry
They look fine on my phone screen unless I zoom in and that is usually when I notice or when I see a pic of mine on my computer screen 
-
-
I do too but delete them after picking the best (or at least what I think is the best ::) ) and then am stuck with the blurry one :ahhh
-
@Aloha said:
. I like all the ways knives and tools are photographed. I think whats important is in-focus photos.Very good point, Aloha. Unfortunately, my camera is not that great and it blurs a good bit. I hope to replace it before long. The phone has served me well for 3 years, especially in the phone/text/data sense, but not so great in the photo/video department. It's some kind of LG....might have to concentrate more on the photo side of things next time around.
-
@Jim the Brave said:
Maybe I should pay more attention to that, but honestly, did you ever wear one out or break one?
I own a couple of SAKs that were "fanned" for years in a display cabinet in the store where I bought them on which you can definitely feel that the back springs have weakened, especially if you compare them with the same SAK that has been stored in its box.
I only buy a "fanned" tool when it's the last one that they have in stock, or when I already bought the one or two which were stored in their box , but like it so much that I even want the fanned displayed one... (I can't help myself, when I find an older SAK/tool of which they have more than one in stock, I tend to buy all of them ::)).
Needles to say that al of my SAKs/tools are stored nicely in a closed position ;).
-
@Top-Gear-24 said:
I own a couple of SAKs that were "fanned" for years in a display cabinet in the store where I bought them on which you can definitely feel that the back springs have weakened, especially if you compare them with the same SAK that has been stored in its box.I only buy a "fanned" tool when it's the last one that they have in stock, or when I already bought the one or two which were stored in their box , but like it so much that I even want the fanned displayed one... (I can't help myself, when I find an older SAK/tool of which they have more than one in stock, I tend to buy all of them ::)).
Needles to say that al of my SAKs/tools are stored nicely in a closed position ;).
That makes sense. I wasn't really thinking about leaving them on long term display.....I guess that does happen when they are displayed in stores where they are sold new. For me, I buy and sell used knives, and if I have a knife on display more than a month, I'm doing something wrong! ;)
But for photos, which is my chief time of fanning a tool, I stand by my opinions of looks. To me it is a very temporary thing--they're hardly fanned for more than 5 minutes, then closed back up for storage.
-
I have a small case locking knife that had very weak spring. The knife felt and looked new, so I wondered why it felt weak... Then I bought the same knife in a clamshell package and realised that the reason for the weakness was that in its package it is stored/displayed opened at 90 degrees...
-
A clean knife is always a great thing too. I like to take pictures with the knife open so the potential buyer can see into the knife. A moment fanned wont hurt the knife.
-
@Aloha said:
A clean knife is always a great thing too. I like to take pictures with the knife open so the potential buyer can see into the knife. A moment fanned wont hurt the knife.
An in-focus pic of a clean knife is what's most important.
And if you fan a tool for a couple of minutes to take some pics, it won't do any harm, I do that myself. But doing so for a longer period for display purposes, that's a big no no in my book.
-
It's worth noting that the official Victorinox shops display especially made SAKs for fanning, The tangs have additional stops built in to avoid accidental closure and stress on the backspring.
Interesting points all around though.... There seem to be certain aesthetically pleasing patterns, some because of symmetry and balance... but I suspect that some may give us a subconscious feeling of "not broken".
When clocks are on display for sales and advertising, they are often set at 10:10 because it is symmetrical and "not broken" even though you haven't actually looked at the time. If you saw a clock that had the minute hand at "10" (really the 2), and the hour hand just a hair below the 9... it apparently quickly appears broken to the viewer (and it is).
Just some food for thought.

-
@Poncho65 said:
I do too but delete them after picking the best (or at least what I think is the best ::) ) and then am stuck with the blurry one :ahhhFor cell phone photography, sometimes it is the minimum focusing distance that is messing up the photo(too close to the object), and depending on what kind of photo you'd like to make, the closer you are to the object, more likely the background/further part of the tool maybe blurred out. So for cell phone photo, one trick I'd always use is to take half a step back and zoom in.
@Top-Gear-24 said:
I own a couple of SAKs that were "fanned" for years in a display cabinet in the store where I bought them on which you can definitely feel that the back springs have weakened, especially if you compare them with the same SAK that has been stored in its box.I only buy a "fanned" tool when it's the last one that they have in stock, or when I already bought the one or two which were stored in their box , but like it so much that I even want the fanned displayed one... (I can't help myself, when I find an older SAK/tool of which they have more than one in stock, I tend to buy all of them ::)).
Needles to say that al of my SAKs/tools are stored nicely in a closed position ;).
I too have similar experience, and did rescue a few vintage SAKs from display window. Some must have been fanned for more than 10-20 years, and the spring was obviously weaken.
Having said that, most SAKs do have good spring tempering/hardness and design, such that it's pretty rare to see the backspring broken due to fanning of tools.However, I did hear story about traditional knives where fanning out of all the blades may cause unnecessary stress to the backspring and may even break the backspring when you are doing it. I think it is more likely the case especially when the backspring is harden to higher RC and they could be more 'brittle' to break.
-
Good points, everybody!

-
@comis said:
For cell phone photography, sometimes it is the minimum focusing distance that is messing up the photo(too close to the object), and depending on what kind of photo you'd like to make, the closer you are to the object, more likely the background/further part of the tool maybe blurred out. So for cell phone photo, one trick I'd always use is to take half a step back and zoom in.I have done this with good results but usually just take a tool or knife out and snap a few quick pics and never think to do that ::)
:D -
It will also depend on the camera
I have a flagship Samsung phone and they are suppose to have some of the best cameras on a smartphone. I have an S20+ and it takes awesome pics but sometimes focuses on different parts of the screen than I want it to (even if I click on where I want it to focus) otherwise I am very happy with it as a camera

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

