Scale tools - 4th opening
-
@Reinier said:
I'll never post a pic in order to illustrate something to you ever again ;)
3rd back slot, 4th if you exclude the pin. Thanks again for explaining anything better than I do Reinier!
But the rear slot is for the Electronic scales, so that the short tweezer can be used there. Not sure in the exact year of introduction, but I think after 2000, when the plus scales were still ‘solid’, without all the modern reinforcing ribs found in the ‘hollow’ scales.
Reinier will explain anything I missed. 😉
-
But there are no electronic cellidor front scales so why the extra slot on the back?
-
@kamakiri said:
Like anything Victorinox does, it’s about production efficiency. Both scales share the same interior injection mold. Saves on tooling costs.That"s actually what I had typed and then deleted. Becaude I sort of doubt it. The molds can not be identical since on cellidor the slot is still closed

Oh well :) -
But yes of course, probably some parts of the mold are identical, that makes sense

Need more coffee :D -
@Reinier said:
But yes of course, probably some parts of the mold are identical, that makes sense
Need more coffee :D:D
Yeah, bad things happen when I type under or un-caffeinated.
But it does seem to me that they would only have to change the outer part of the mold. Which they’d have to do for the ESD textured electronic scales anyway.
-
@pfrsantos said:
So, the 4th slot is a 3rd slot... why not have a 2nd slot in the other scale, to make a 5th slot? It would be less crowded.

Cosmetics. The front side uses the (normal) Tweezer slot to display the Victorinox name against it. Adding more tools to the ‘front’ scale like where the pen goes on the back would muck it up a bit. Adding a slot under the shield would be a no-no for the translucent versions.
-
This makes me want some Fireflies more

I was tempted to open teh 4th slot on the plus scales I got recently before putting them on, but I was sure that I'd muck up the opening in some fashion

The 4th slot seems to use 'short' tweezers, do you all mean the ones from 58mms?
-
@GearedForwards said:
The 4th slot seems to use 'short' tweezers, do you all mean the ones from 58mms?Acutally no, the short ones are different. Part number is A.3742. You can find them on eBay and they are also available in some of the replacement parts kits (here for example: https://ebay.com/itm/193973665263)
-
@Reinier said:
Acutally no, the short ones are different. Part number is A.3742. You can find them on eBay and they are also available in some of the replacement parts kits (here for example: https://ebay.com/itm/193973665263)So kind of like an inbetween size?
-
No, 58mm and 91mm tweezers are the same size at about 45mm. The short ones are about 35mm (measured using a SwissTool so give or take 2mm ;) ).
-
Short ones on the left. Middle one (red) is for 58mm SAKs. Note that the plastic part on the short tweezers has the same angle as the 91mm ones.
Obviously the same tweezers (58mm and 91mm) are used in 74mm, 84mm, 111mm and 130mm SAKs and also in SwissCards. And probably elsewhere too :)
Also: https://sakwiki.com/tiki-index.php?page=Tweezers

-
Excellent explanations, as usual.@GearedForwards said:
This makes me want some Fireflies more
I was tempted to open teh 4th slot on the plus scales I got recently before putting them on, but I was sure that I'd muck up the opening in some fashion

Just do it. I only used a Vic Metal Saw and worked slowly, using the side walls to guide the initial cuts on each side. Test fit the tweezers before you’re done to make sure you don’t cut too far.
-
@Reinier said:
Short ones on the left. Middle one (red) is for 58mm SAKs. Note that the plastic part on the short tweezers has the same angle as the 91mm ones.Obviously the same tweezers (58mm and 91mm) are used in 74mm, 84mm, 111mm and 130mm SAKs and also in SwissCards. And probably elsewhere too :)
Why are those not aligned and evenly spaced?!

-
To annoy you :)

-
-
@pfrsantos said:
Thanks! See, Reinier? It's not that hard!


-
She never said that!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

