Leatherman Free P2/P4 Club and Feedback Thread
-
Feedback for movie buffs

-
I will say they aren't as bad as I originally feared they might be. I now have most of the Free collection short of a few colour variations for the K knives. The locking mechanism, once you get used to it, is ok. It works really well on the T and K series. I still find it a bit awkward on the P series though. Still re-adjusting my thinking on this lineup is a constant affair, and so far, my estimation of this family is improving with time.
-
Carried it for a year now. It’s pretty great. I prefer it over my Wave even though its not as robust or has no diamond file.
-
Well my new P4 has arrived today. First impressions are great, except access to the inner most tools on the awl side. It actually feels very much like an original Wave.
Tbh I would not have paid the full price at £169 in the UK but I managed to get it for £120. It was a second with inscribing over written in block.
I haven't tried it in anger yet but will let you know my thoughts. I'm new to the site but I've had leathermans since my first wave in 2001ish. I have built up a nice collection and usually carry an MUT, skeletool or Signal but always found I missed a file and scissors.
-
@Yoda mpb said:
Well my new P4 has arrived today. First impressions are great, except access to the inner most tools on the awl side. It actually feels very much like an original Wave.Tbh I would not have paid the full price at £169 in the UK but I managed to get it for £120. It was a second with inscribing over written in block.
I haven't tried it in anger yet but will let you know my thoughts. I'm new to the site but I've had leathermans since my first wave in 2001ish. I have built up a nice collection and usually carry an MUT, skeletool or Signal but always found I missed a file and scissors.
Are the inside tools on the awl side hard to open?
I mean, they should open just as easy with one hand as the other side, maybe the tool is still a bit stiff and needs to be worked in a bit more?
-
I started saving my quarters change since they came out and finally got a P-2 for a really good price on the bay. My first impressions were im glad i didnt pay full price for this thing. The screwdrivers are thicker and have no blade play when out for use but the other side which has the awl, can opener etc are much thinner and have a minor wobble, but definitley solidly locked into their hooks. I also bought the T and K series as they emerged on the secondary market so i was already used to the tool set. The small sharp anti wobble bumps to hold the handles dont really bother me much, just when im opening the main blade the lower handle has a minor side wobble. I will try to lightly tighten the pivot screw on the awl side to see if it helps the nano motion. overall its a seemingly workable contraption, definitley not a match for any swisstool or wave charge etc. For a low second market price it should be a good edc at work tool, havent tried the wire cutter function yet to see if it locks up the pivot. Currently have about 35$ in quarters saved for the P-4. and am watching the bay closely for a good buy in now deal, im done with the last second sniper bid action. Happy holidays to you all and stay safe out there.
-
@Top-Gear-24 said:
Are the inside tools on the awl side hard to open?I mean, they should open just as easy with one hand as the other side, maybe the tool is still a bit stiff and needs to be worked in a bit more?
It is starting to loosen up.... I agree the drivers are thicker. Its definitely over priced but I do like it so far. It seems to have all I want, I guess time will tell.
-
I am loving my P4. I sold off my Surge and picked up the P4 when Amazon dropped the price $20 last year. I am happier with the smaller size and weight, the one-handed operation comes in handy and makes the thing more fun to use than any other multitool I have had. I use it daily and have never had it fail to do what I needed. In about 9 months of use I have only experienced very minor tightening of the pliers after cutting some wire and it was easy to loosen it back up with a few open-close cycles. I know others have had bigger problems with the pliers but that has not been my experience, so I guess there were some QC issues with these.
Now that I know I am happy with it and keeping it as my daily carry I am going to add the 4 mm bit driver and horizontal sheath from ZapWizard. Might also get the t-shank adaptor in order to add the Surge diamond file back in... I do miss the bigger file since switching from the Surge.
-
So what's the overall consensus on these tools? I see mixed feelings and have come to the conclusion that although carrying a Wave or a Charge is nice, I really don't need a super heavy duty tool for daily use, figured I would ask. I would like to try one but am going to try and trade my way for one. If anyone here has one they want to trade, check out my post in the "Tools Wanted" section.
-
Think we have a buddy who will be selling bit adapters like they are going out of style soon

-

Maybe they'll buy the Free bit driver design and put it in the Free tools?
-
@The Lone Wanderer said:
So what's the overall consensus on these tools? I see mixed feelings and have come to the conclusion that although carrying a Wave or a Charge is nice, I really don't need a super heavy duty tool for daily use, figured I would ask. I would like to try one but am going to try and trade my way for one. If anyone here has one they want to trade, check out my post in the "Tools Wanted" section.Save your money and get a Rebar instead

-
@The Lone Wanderer said:
So what's the overall consensus on these tools? I see mixed feelings and have come to the conclusion that although carrying a Wave or a Charge is nice, I really don't need a super heavy duty tool for daily use, figured I would ask. I would like to try one but am going to try and trade my way for one. If anyone here has one they want to trade, check out my post in the "Tools Wanted" section.I personally think the p2 and p4 are great. For me I want ease of use, which is what they do. All the tools are on the outside and to me that means fast access.
There are so many people that don't like them and I am yet to understand why.
I've owned both for a few months and have daily carried most of the time. I do still reach for my MUT for bigger weekend work. But that more because its very well used and next to be replaced by another MUT.
I have a bigger issue with the T4. Yes it's OK but very big for what it does and doesn't have pliers.
-
I did a video review of the Free P4, and I did like it, but not enough to keep it. I traded mine for an OHT.
Sent from my iPhone using Tapatalk
-
@The Lone Wanderer said:
So what's the overall consensus on these tools? I see mixed feelings and have come to the conclusion that although carrying a Wave or a Charge is nice, I really don't need a super heavy duty tool for daily use, figured I would ask. I would like to try one but am going to try and trade my way for one. If anyone here has one they want to trade, check out my post in the "Tools Wanted" section.Get a Free P2. If you need the other tools, and a better file and awl, get a Charge and add the awl
-
I think as a self-contained multitool the P2 and P4 are both great functionally. I think the only real design issue with them is the blade lock hotspots at the ends of the handles. They can make heavy duty plier work uncomfortable. This probably becomes a dealbreaker for people with larger hands. Even though my hands are very "medium" sized (based on various gloves), the palms of my hands are wide so those lock tabs do get in my way some of the time.
I think that everything else people gripe about is fairly moot. There are no moving parts at the magnet assemblies, so dust and dirt accumulation (assuming they occur) don't actually impede functionality. Plus, opening the tool completely provides ample access to the internals for cleaning (although iron filings directly on the magnet seems like it's probably very hard to remove). As a percentage of total use cases, the number of times you are working around metal shavings (for the vast majority of users) is zero, just zero. I get that someone working in construction or in a machine shop must instantly veto this design, but for them, they only have every other Leatherman tool to choose from, so they haven't been abandoned by any means.
Having said all this, I barely use my P2 or P4. Most of the time I need a driver, it's a torx or hex, so I really need a bit driver for my EDC. Outside of that, for gardening and around-the-house work, I just use either a Bond (lighter and smaller) or a Victorinox Cadet ("just a knife" plus some extras).
-
I've been carrying my P4 almost exclusively for a month. I could probably get away with a P2, but I like having a saw, even if I don't use it too often.
The included drivers will handle Phillips and slot screws, obviously, but the end of the file can handle Robertson, which has most of my bases covered. It kind of feels like a Farmer X with full-sized pliers.
.jpg)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

