Serrated MT blade sharpening
-
Can any of you recommend a good sharpening system so I can sharpen it? I was looking at the spyderco sharpmaker, is that any good for serrated blades?
Not really. It has a way to orient the rods so that the tips of the triangles will (theoretically) reach into the serration gullies. In practice, it rounds off the pointy tips of the serrations.
Best thing is a tapered rod. Doesn't have to be expensive or particularly fine. I use this one:
http://www.amazon.com/Smiths-PP1-Pocket-Multifunction-Sharpener/dp/B000O8OTNC/ref=sr_1_1?ie=UTF8&qid=1439401863&sr=8-1&keywords=smith's+knife+sharpenersI used that the other day; worked great. If you want the serrations to be honed as well as sharpened, you'll need to find something a little higher-end.
I use the carbide and ceramic rods to sharpen plain edge knives I really don't care much about, or that are really badly ground from the factory.
+1
Smith also has this diamond rod: http://www.amazon.com/gp/product/B001910FOA.
-
I use a KME guided diamond system for Plain edge blades and was using a ceramic rod for the serrated kitchen knives. The rod is to big for the rebar's serrated blade so I'm going to get one of these two.


-
I love the spyderco sharpmaker and I have sharpened serrated blades with it.
I'm not a big fan of serrated blades, so I don't know how it works long term, or on a damaged blade. -
@smiller43147 said:
I love the spyderco sharpmaker and I have sharpened serrated blades with it.
I'm not a big fan of serrated blades, so I don't know how it works long term, or on a damaged blade.+1 for the Sharpmaker. If you go slowly and work the rod in the serrations, you can avoid blunting the tips. It's all in the technique, you can't go fast like with a plain edge.
I have also used rods with success, but have a full Sharpmaker setup sitting on my workbench.
-
Make your life and get this little jem. It does serrated blades nicely with little fuss.
-
I use a KME guided diamond system for Plain edge blades and was using a ceramic rod for the serrated kitchen knives. The rod is to big for the rebar's serrated blade so I'm going to get one of these two.
Get the balisong-style one. Matches the multi-tools. :)
Why didn't I think of that. :ahhh
400 vs 600 grit, the balisong looking one is 600, I think that'll be the one. -
Five and a half years later, does anyone else have any advice on a good serrated blade sharpener?

Has anything else appeared on the market since?
-
-
@Syncop8r said:
Five and a half years later, does anyone else have any advice on a good serrated blade sharpener?
Has anything else appeared on the market since?
Not really but this helps little, it has different size rods on 1 http://www.jokerknifestore.com.au/warthog-sharpeners-diamond-serrated-blade-sharpene
Only Tools Matters
-
@Antti Lammi said:
Not really but this helps little, it has different size rods on 1 http://www.jokerknifestore.com.au/warthog-sharpeners-diamond-serrated-blade-sharpeneOh that's cool.

A little expensive though. :-[ -
I'm going to give the Eze Lap Diamond Sharpener ST a try.

-
Should work pretty well. I've been looking at getting one or a DMT. I've got a ton of work to correct some seriously borked serrations on a used Cold Steel Voyager I bought. Two larger serrations have chips, and a finer serration has completely been broken off.
-
The diameter is smaller than the large serrations on the Wave and Surge so I'll have to employ some sort of sideways motion to sharpen those.
Since purchasing it I have noticed the Smith's sharpeners that Dean51 (RIP) showed for sale nearby.
-
@Syncop8r said:
The diameter is smaller than the large serrations on the Wave and Surge so I'll have to employ some sort of sideways motion to sharpen those.Since purchasing it I have noticed the Smith's sharpeners that Dean51 (RIP) showed for sale nearby.
Or wrap it in folds of sandpaper till it fits.
-
the most efficient way to sharpen a serrated blade is to remove material from the back by laying it completely flat onto a sharpening stone, it will take a little time but it will create a consistently sharp edge.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login