ZapWizard's Leatherman Free P4 Mods
-
@ZapWizard said:
Both designs look good. Did you need to grind it down due to the minimum thickness that Shapeways required?No, it wasn't them. :) I had done the same thing you did on one of your bit adapters, where I took advantage of the additional width available toward the end of the bit when there's a spring on either side. I think I had done an extra 0.8mm on either side, figuring I'd probably end up grinding it down a bit. When I got the tool back from Shapeways, it fit, but it brushed against the blade on one side and the scale on the other in a way that annoyed me. I think my next iteration of that tool is going to be shorter, so it will fit with the original plastic spacer in place, and also a bit narrower so I don't have to grind it down. This full-length version is also a bit heavier than I'd like, so making it shorter will help with that too.
-
What did you use to cut the Surge T shank file and saw down to fit inside the P4? I can't seem to find anything detailing how to shorten file steel.
-
@CovertPenguin said:
What did you use to cut the Surge T shank file and saw down to fit inside the P4? I can't seem to find anything detailing how to shorten file steel.I just used a Dremel with a reinforced cutoff wheel, and then a stone grinder to smooth the cut.
Since it is a hardened steel file, you can't use a hack saw or anything metal to make the cut. -
Thank you, Zap. I'm patiently awaiting the arrival of both the T shank & bit holders from Shapeways for my P4.

-
I think for those that have removed the stock clip for using with one of Zaps holsters, I have an interesting idea. I know Zap has recommended a screw set to fill these holes, but what if we could use this opportunity to do something a little more fun.
I wonder if someone (Zap wink wink) could develop a little tiny area for engraving using this space. Like a little plate that fits seamlessly with the style of the Leatherman free, that we could take to an engraver to put our initials or something in.
Anyway I thought that would be more fun than just filling it with screws.

-
@RedMango said:
I wonder if someone (Zap wink wink) could develop a little tiny area for engraving using this space.That is a great idea! But the area would be quite small as you said, but enough space for some initials.
Here is the design I came up with. (No plans on manufacturing this, so DIY folks)

Here are some renderings I whipped up with different materials.

Stainless steel, Cermark etching
Blackened Aluminum, Laser Etched
Polished Brass, Cermark etching -
I mean that just looks beautiful and is exactly what I had in mind. I am a buyer of other peoples excellent craftsmanship not a maker of my own. Lol. I’d have no idea how to do that.
However, I appreciate your work on the idea. Always the best from the ZapWizard. Thanks.
-
@ZapWizard said:
I got the tritium vial prototypes in, and didn't have any blades even left in my P4 to install them into. (I am going to put the main blade back in)
Thank you, ZapWizard! I eagerly await this one too. (Already have the flat bit driver, t-shank, and scalpel mods) -
Awesome mods/accessories ZapWizard.

It would be great if there was a way to shorten the file/saw blade holder so that one didn't need to shorten the file and saw blade.

I'm guessing the barrier to this is the screws needing to sit in the cutout and no further back?
I wonder if the file/saw could be secured another way to get around this... maybe the screws drive in from the spine instead of the face and push a wedge-shaped piece down to secure it.
Other than that

-
@Syncop8r said:
It would be great if there was a way to shorten the file/saw blade holder so that one didn't need to shorten the file and saw blade.
As you guessed: If the blades were left full length then the shank of the T-Shank would end up inside the pivot point.
I did look at using set screws to bind directly against the blade, the catch here is that there isn't enough thickness in the metal for the set screw length. If tightened on a 1mm blade the screws would have had only one or two threads left to hold.
I actually didn't think about having them on the side, that might have worked but would still have something protruding. But I may look at what a side screw might do just because a new idea can sometimes open up other ideas.
-
So I received my Leatherman Ratchet. I am going to live stream the process of making the 3D model join me here in a bit:
https://youtu.be/0fSLZB3yZfc -
The 2 hour stream is done!
Here is the end result:

-
Thanks for the tip, ZapWizard, just ordered a Ratchet. Looks useful 8)
-
Very nice 8)
Watch a good deal of that live stream

-

Today I sat down to design a holster for the new Leatherman Ratchet Driver. Instead ended up with these designs. (All these images are 3D renderings)

I designed a very cool (if it works) design that will use magnets to retain the Ratchet Driver and twelve regular bits.
There is a revolver style ejector that you get started by pushing a button at the end of the handle. This allows easier access to six of the bits.
The cool part is that you can take the handle apart from the Ratchet Driver to allow it to take up less space in a bag or pocket.

This part would be 3D printed with all the moving parts already stuck inside. Getting all the magnets glued in will be a bit tricky.

I also designed a no-magnet option which uses friction to hold the bits and Ratchet Driver. It has a deep 1/4" socket at the back of the handle.

Finally, the actual ratchet mechanism is hard to turn. So this little addon will increase the grip and leverage on the Ratchet mechanism.
I don't know when I will get around to 3D printing these all up. I also still need to make a holster style design.
-
Now that is just plain awesome :o

Great work

-
Just wow!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

