Mad Max Challenge
-
@FolderBeholder said:
Day 27
Fits like a glove.Cool pic FB!

-
@comis said:
That's actually pretty surprising...I would imagine it would at least require the giant tweezer/plier to make it work. :oThe watch had the screw in pins so I had to use a jewelers screwdriver to unscrew them and when they were fully unthreaded the tweezers worked perfect to just pull them out. I’m sure the pliers would have worked great as well but the teeth on the pliers are so aggressive which normally works great but I didn’t want to scratch anything
-
@Simon_Templar said:
Day 27Needed to check the voltage of my USB power supply. Even with perfect eyesight it would be difficult to read tiny silver writing against a white background. Kudos, Anker designers! Luckily the XLT came to the rescue.
Good use Simon!
-
Day 27
I have seen videos using the corkscrew to untie knots, I thought I would give it a whirl due to a very tough knot in my boot laces, eventually I got it but I did find it much more difficult then what I have seen, possibly because the knot was very tight


-
@SDDToolCo said:
Day 27I have seen videos using the corkscrew to untie knots, I thought I would give it a whirl due to a very tough knot in my boot laces, eventually I got it but I did find it much more difficult then what I have seen, possibly because the knot was very tight

Things in side mirrors appear farther away than they are (or is it nearer?).
Persons in movies appear taller than they are.
Persons on TV appear fatter than they are.
Rooms on TV appear deeper than they are.
In the Matrix, things appear better than they are.
And things in Internet videos appear easier than they are.

Whatta world!
Fortunately there are SAKs.
-
@Reinier said:
Not sure if serious... but I thought the blades were not sharpened?That's a good question, I used to read that on SAKwiki, but in fact, all the blades(13 if I have counted correctly) are all sharpened. Maybe it varies from Giant to Giant?

FB, could you please check are all the blades on your Giant sharpened too?

-
@Simon_Templar said:
That hat looks scared...Probably for good reason. >:D
Had to put something under the chair. It was too loud when I moved it.
Good use! I live in an apartment building, and can always appreciate neighbors that would do that, so I won't hear every chair pull in the middle of the night.

@SDDToolCo said:
You and the Giant did a great job!

@SDDToolCo said:
Day 27I have seen videos using the corkscrew to untie knots, I thought I would give it a whirl due to a very tough knot in my boot laces, eventually I got it but I did find it much more difficult then what I have seen, possibly because the knot was very tight

Hmmm...but youtube reviewers always have a way to try to 'look good' in front of the camera, so it's probably never as easy as it's seen. But I think the point maybe was to use the pointy part to loosen different part of the knob little by little, just enough to get the process going?

-
Even Neil (I miss him!) said the blades are not sharpened: /post/438008
-
@SDDToolCo said:
Day 27I have seen videos using the corkscrew to untie knots, I thought I would give it a whirl due to a very tough knot in my boot laces, eventually I got it but I did find it much more difficult then what I have seen, possibly because the knot was very tight

I did it a few times, worked ok for me. You have to keep your expectations in check though. It's not as if the knot will just fall apart at the touch of the corkscrew. After screwing it in, you have to tug and wobble quite a bit before a tight knot will give in. Still a lot better then doing it with your fingers, at least in my opinion.
-
@SDDToolCo said:
Love that file!Thanks SDD!

-
@SDDToolCo said:
Day 27I have seen videos using the corkscrew to untie knots, I thought I would give it a whirl due to a very tough knot in my boot laces, eventually I got it but I did find it much more difficult then what I have seen, possibly because the knot was very tight

Good use SDD!

-
DAY 28
Used the tweezers from the XLT to remove a splinter.
-
@comis said:
Hmmm...but youtube reviewers always have a way to try to 'look good' in front of the camera, so it's probably never as easy as it's seen. But I think the point maybe was to use the pointy part to loosen different part of the knob little by little, just enough to get the process going?
Yeah I definitely agree with that. I tried that slow and steady approach and it finally worked just took some time ???
-
@Simon_Templar said:
I did it a few times, worked ok for me. You have to keep your expectations in check though. It's not as if the knot will just fall apart at the touch of the corkscrew. After screwing it in, you have to tug and wobble quite a bit before a tight knot will give in. Still a lot better then doing it with your fingers, at least in my opinion.Thanks Simon! Yes definitely better than fingers, I think it also came down to how tight the knot was which made it more time consuming and tedious

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
