Need help/advice
-
Thanks!

-
Nice - Yeoman with a saw!

-
The waiter is cheaper than the Compact and has a combo tool, as does the Bantam

-
Garth, did this mod about fifteen years ago he called it Huntsman Light. I made one for myself as well. Check out this thread on a Camper I modded l added a lot of goodies you might be interested in some of them. Check out Felix Immler on you tube for lots of ideas and how-tos as well as all the ways you can use the tools on your Swiss Army Knife it really is a supper tool. Wood scales are totally doable a planer or table saw are nice but can be done with a belt sander or even hand tools if’s that’s all you have. I have a lot of tools in my shop but from time to time I break out my hand tools for fun. For your tweezer, tooth pick, and pen slots start them with triangle needle file then go to a round file then a square file for the tweezer and tooth pick slots. Check out this link on adding a pen to a standard Swiss Army Knife scale. https://youtu.be/CTfEkOQY3ZU It will give an idea on how to make that T and T slots. Unless you want to buy a Compact you are going to need to drill a waiter combo tool. A drill press well make this a lot easier I can drill a combo tool with two new drill bits on a drill press. DeWalt 2x and 4x work a lot better. Good luck with your project and have fun.
Mike
-
Very similar to the Woodsman -- just with the combo tool instead of the standard opening layer and two blades. I still maintain the Woodsman is one of the best layouts they've ever made. Your niece will no doubt love it.

-
@DavZell said:
Help me, SAKi-Wan, you're my only hope...My niece is starting as a Ranger for the National Park Service. I am making her a custom knife. I'd like it to be somewhat slim, as it will possibly be pocket carry only, and I'm not sure how young, female, summer Ranger outfits accommodate gear.
I'm planning on kind of an Explorer-Compact-saw mashup
Front -- Back
======================== ================================
Blade + Combo -- Corkscrew with micro screwdriver
Wood Saw -- small screwdriver
Magnifying Glass + Philips -- nothing
Scissors -- HookPlus Scales - possibly wooden custom, if I can figure it out
So, two things: First, I think I'm set on that configuration, but any feedback? Second, and more importantly, does anyone know of a good source of a combo tool without buying a Compact for just taking that out? I know some people dislike them, so if you know anyone that might have taken them out of older models, please let me know.
Thanks,
DavidCongrats to your niece for becoming a Park Ranger
I love the National Parks, and in my mind they are one of the best ideas America ever had 
-
@GearedForwards said:
The waiter is cheaper than the Compact and has a combo tool, as does the Bantam
I didn't realize that. Thank you!
-
@Mike 56 said:
Garth, did this mod about fifteen years ago he called it Huntsman Light. I made one for myself as well. Check out this thread on a Camper I modded l added a lot of goodies you might be interested in some of them. Check out Felix Immler on you tube for lots of ideas and how-tos as well as all the ways you can use the tools on your Swiss Army Knife it really is a supper tool. Wood scales are totally doable a planer or table saw are nice but can be done with a belt sander or even hand tools if’s that’s all you have. I have a lot of tools in my shop but from time to time I break out my hand tools for fun. For your tweezer, tooth pick, and pen slots start them with triangle needle file then go to a round file then a square file for the tweezer and tooth pick slots. Check out this link on adding a pen to a standard Swiss Army Knife scale. https://youtu.be/CTfEkOQY3ZU It will give an idea on how to make that T and T slots. Unless you want to buy a Compact you are going to need to drill a waiter combo tool. A drill press well make this a lot easier I can drill a combo tool with two new drill bits on a drill press. DeWalt 2x and 4x work a lot better. Good luck with your project and have fun.Mike
Thanks!
-
I think that is a great combination of tools, especially for a park ranger. It is also at the edge of pocketable.
If you don’t do the wood scales, then can I recommend some Smokey the Bear scales. There are a few different patterns that come on SMKW Exclusive Tinkers. They aren’t plus but I think wood be fitting.

-
@Altis said:
While they look nearly identical, I don't believe the 84mm and 91mm combo tools are the same part, so the Bantam/Waiter/Walker might not work for harvesting the part.The wiki says it should work, just need to drill out the hole for the bigger pins and it'll sit a little lower in the frame

-
@GearedForwards said:
The wiki says it should work, just need to drill out the hole for the bigger pins and it'll sit a little lower in the frame
I agree I have used a lot 84mm combo tools for 91mm mods. They do sit a little lower but it never bothered me.
-
@DavZell said:
My niece is starting as a Ranger for the National Park Service. I am making her a custom knife. I'd like it to be somewhat slim, as it will possibly be pocket carry only, and I'm not sure how young, female, summer Ranger outfits accommodate gear.Congrats to her and to you for making a wonderful gift! Does she know where she's going to be assigned?
-
Sounds like a good layout to me. I’d use the 91mm Combo Tool. I think calling it a Compact Woodsman would be instantly recognizable, for the most part.
-
You’ll certainly be getting a lot of functions into four layers.
Given that she is going to a “wild” national park and not an “historical” national park, my first choice for scales would be alox for superior resistance to physical (will generally survive drops from reasonable heights onto hard surfaces with no more than cosmetic damage), thermal (you can put it in boiling water if you need to sterilize it in the field), and chemical (bug repellent, camp stove fuel) attack. Second choice would be G10 or micarta. I’d stay away from cellidor (too prone to damage if dropped or exposed to common hiking/camping substances) or wood (if not stabilized may have poor water resistance and issues with expanding and contracting due to humidity, may have problems with cracking if dropped even if stabilized).
-
I’d probably use an awl instead of the hook but otherwise it sounds perfect.
Sent from my iPhone using Tapatalk
-
@nate j said:
You’ll certainly be getting a lot of functions into four layers.Given that she is going to a “wild” national park and not an “historical” national park, my first choice for scales would be alox for superior resistance to physical (will generally survive drops from reasonable heights onto hard surfaces with no more than cosmetic damage), thermal (you can put it in boiling water if you need to sterilize it in the field), and chemical (bug repellent, camp stove fuel) attack. Second choice would be G10 or micarta. I’d stay away from cellidor (too prone to damage if dropped or exposed to common hiking/camping substances) or wood (if not stabilized may have poor water resistance and issues with expanding and contracting due to humidity, may have problems with cracking if dropped even if stabilized).
At first I thought one of the National Parka SAKs would be a nice choice. Or, of course, this custom crafted one. But I agree with NateJ here. Alex will take more of a beating.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
