What did you use your Sak on today?
-
I built a custom SAK about a month ago that is now my daily carry. I've really enjoyed it. I seem to use screwdrivers more than I think normal people do, due to my tinkering, makering, 80 year old house, etc.
Here it is tightening a loose door handle. It's great to be able to just whip it out, screw around, and carry on.


-
Great job DavZell

-
Used the Midnite Manager to change the battery on a fauxton.

-
Opened some bird food


-
@DavZell said:
I built a custom SAK about a month ago that is now my daily carry. I've really enjoyed it. I seem to use screwdrivers more than I think normal people do, due to my tinkering, makering, 80 year old house, etc.Here it is tightening a loose door handle. It's great to be able to just whip it out, screw around, and carry on.


Great work! I found too that the CT driver is the perfect tool for that type of door handle.

-
Had to change a hard drive in an old mac book.
Used my XLT for every step: Philips #0 while opening and closing the machine and also while removing and fastening the hard drive. Had to use the pliers with one screw which got stuck. When I tried to put it back together there was a problem with the hard drive bumper. Had to file away some plastic - otherwise the screws won't match their corresponding holes.
After that little exercise I used the scissors on a package for breakfast.
-
Used Cybertool pliers to pluck price/inventory staples out of cedar slats for raised planter boxes.
Used the metal saw/file tool in CT to file off a burr left after hacksawing off a screw point. Metal saw edge needs cutting improved. File is quite good. Vic needs to improve cutting of metal saw to be equal to the effectiveness of the file; then I could junk my hack saw, along with my file.

-
It's getting to the point now where I really don't even notice what I use my SAK on because I use it so much, for so many things, without thinking. The only thought process is, which of the SAKs I have on hand will be best for this job, or easiest to get out and open up, etc. ?

-
@Jim the Brave said:
It's getting to the point now where I really don't even notice what I use my SAK on because I use it so much, for so many things, without thinking. The only thought process is, which of the SAKs I have on hand will be best for this job, or easiest to get out and open up, etc. ?

-
@SgtTowser said:
Used Cybertool pliers to pluck price/inventory staples out of cedar slats for raised planter boxes.Used the metal saw/file tool in CT to file off a burr left after hacksawing off a screw point. Metal saw edge needs cutting improved. File is quite good. Vic needs to improve cutting of metal saw to be equal to the effectiveness of the file; then I could junk my hack saw, along with my file.
Is it the "new" stainless steel version?
-
Pliers on SAKs have become so frequently used that I wish Vic would add them to any 2 layer model to become a 3 layer. A Tinker with pliers would be super. For example, I used to pry staples out with the cap lifter’s tip, but the pliers is so much easier and faster!
-
@SgtTowser said:
Pliers on SAKs have become so frequently used that I wish Vic would add them to any 2 layer model to become a 3 layer. A Tinker with pliers would be super. For example, I used to pry staples out with the cap lifter’s tip, but the pliers is so much easier and faster!No SgtTowser, a Tinker with scissors would be Super. A Tinker with pliers would be Deluxe.
Sorry
I'll see myself out.

-
@ElevenBlade said:
No SgtTowser, a Tinker with scissors would be Super. A Tinker with pliers would be Deluxe.Sorry
I'll see myself out.

Hmmmmm
A tinker with pliers and no scissors would be a Semi Deluxe Tinker.
-
@DavZell said:
I built a custom SAK about a month ago that is now my daily carry. I've really enjoyed it. I seem to use screwdrivers more than I think normal people do, due to my tinkering, makering, 80 year old house, etc.Here it is tightening a loose door handle. It's great to be able to just whip it out, screw around, and carry on.



-
@ElevenBlade said:
No SgtTowser, a Tinker with scissors would be Super. A Tinker with pliers would be Deluxe.Sorry
I'll see myself out.

The deluxe Tinker is the next SAK I’m going to pick up, because I like to carry two SAKs each one with pliers, so I can ply from both ends, or choose the optimal tool to drive on either tool, and ply with the other. This is even more desirable to me now that I have expanded my driver opportunity set on my Cypertool with a Wiha 4mm to 1/4” converter. Presently I carry a CYBERTOOL L and an S557 Wenger, which gives me exceptional flexibility of wrenching/driving choice, and exceptional tool density, as well as one 91mm form factor and one 84mm form factor. But with the expanded sockets and drive tips the converter allows on the CT, I can afford to cut back layers from the S557 to a DELUXE Tinker. But what I would really like is just a Tinker with a plier layer added, OR my ultimate ideal—a 111mm OHO Sentinel with a plier layer added to it.
I have tried carrying a 111mm Work Champ with my CT and it’s just too much knife load out for my taste, though I really like the big blade and big pliers.
CT-L with a Sentinel with a big plier layer added would be SAK Nirvana for me.
In never need two scissors. I never need two can openers and two cap lifters. I don’t need two parcel hooks and two awls. And so on. But I do need two pliers and one hand opening on at least one of my two knives.
-
@Jim the Brave said:
It's getting to the point now where I really don't even notice what I use my SAK on because I use it so much, for so many things, without thinking. The only thought process is, which of the SAKs I have on hand will be best for this job, or easiest to get out and open up, etc. ?
This is why I weaned off my leatherman tools and my “real” tools and came full circle back to SAKs. If I were still working with money riding on things, then I would pack a leatherman, and a Wiha 11 in One set, plus all my tool boxes, plus god only knows what other new stuff exists I don’t even know about.
But I’m retired. And my goal has been to lean down to a tool set that frees me of as much stuff as possible. Two SAKS, one in each pocket, does it. I love my CT-L in one pocket and my WENGER S-557 in the other. No clips. No nursery knife. Every tool on both are visible with a quick flip. No unfolding this and opening that. No opening and closing a tool box. No rummaging through other tools to find the tool I want. Either I fix it right then, which I usually do, or speed dial some one else to solve it. If I’m bored, I’ll go to my real tools, otherwise it’s fix now, or speed dial. I can’t believe how often I use my two SAKs and how rarely stuff hangs over my head anymore. My way won’t work for those that want to McGuyver every situation, or that HAVE to go get their real tools, both proving their skill and resourcefulness. I respect that. I just have nothing left to prove. I carry tools now solely to keep things from hanging over my head.
Just. Use. The. Tool.
NOW!
Or...
Speed dial.
I can’t tell ya how much more I enjoy my days, when I no longer feel I have to fix everything.

But I still mightily respect all those at that time of life, in the crossfire, when they HAVE to, or the wheels come off.
-
@SgtTowser said:
The deluxe Tinker is the next SAK I’m going to pick up, because I like to carry two SAKs each one with pliers, so I can ply from both ends, or choose the optimal tool to drive on either tool, and ply with the other. This is even more desirable to me now that I have expanded my driver opportunity set on my Cypertool with a Wiha 4mm to 1/4” converter. Presently I carry a CYBERTOOL L and an S557 Wenger, which gives me exceptional flexibility of wrenching/driving choice, and exceptional tool density, as well as one 91mm form factor and one 84mm form factor. But with the expanded sockets and drive tips the converter allows on the CT, I can afford to cut back layers from the S557 to a DELUXE Tinker. But what I would really like is just a Tinker with a plier layer added, OR my ultimate ideal—a 111mm OHO Sentinel with a plier layer added to it.I have tried carrying a 111mm Work Champ with my CT and it’s just too much knife load out for my taste, though I really like the big blade and big pliers.
CT-L with a Sentinel with a big plier layer added would be SAK Nirvana for me.
In never need two scissors. I never need two can openers and two cap lifters. I don’t need two parcel hooks and two awls. And so on. But I do need two pliers and one hand opening on at least one of my two knives.
Theres probably a 2 SAK user thread somewhere around here you'd be interested in. That's a well planned system you have. Reading this, I was going to suggest a 111mm... but it seems you already thought of that.
@SgtTowser said:
This is why I weaned off my leatherman tools and my “real” tools and came full circle back to SAKs. If I were still working with money riding on things, then I would pack a leatherman, and a Wiha 11 in One set, plus all my tool boxes, plus god only knows what other new stuff exists I don’t even know about.But I’m retired. And my goal has been to lean down to a tool set that frees me of as much stuff as possible. Two SAKS, one in each pocket, does it. I love my CT-L in one pocket and my WENGER S-557 in the other. No clips. No nursery knife. Every tool on both are visible with a quick flip. No unfolding this and opening that. No opening and closing a tool box. No rummaging through other tools to find the tool I want. Either I fix it right then, which I usually do, or speed dial some one else to solve it. If I’m bored, I’ll go to my real tools, otherwise it’s fix now, or speed dial. I can’t believe how often I use my two SAKs and how rarely stuff hangs over my head anymore. My way won’t work for those that want to McGuyver every situation, or that HAVE to go get their real tools, both proving their skill and resourcefulness. I respect that. I just have nothing left to prove. I carry tools now solely to keep things from hanging over my head.
Just. Use. The. Tool.
NOW!
Or...
Speed dial.
I can’t tell ya how much more I enjoy my days, when I no longer feel I have to fix everything.

But I still mightily respect all those at that time of life, in the crossfire, when they HAVE to, or the wheels come off.
I used to carry a Leatherman- it was just what I needed. The bonus was, I didn't need a separate knife. Maybe I never needed one... but it was nice to carry the One Thing. I moved o to SAKs because I didnt need pliers, and SAKs were more versatile for what I was doing.
The thing is - choices.... too many choices among SAKs for my little mind to compute. Picking two just doesn't work for me - Maybe one day, but not at this point in my life.
-
Well today the Farmer got an exercise at the Sawmill. I'm forever losing the little breather caps off our lube water tanks. I'll show you in 5 pictures what I did, and then the 6th picture shows the lube tank installed on the sawmill in operational position.
Sorry I got these pictures out of order a little. Third one I think should be first....



-
And then....
And notice in the last picture, the tank is installed, and the Farmer is dangling off the control panel once again on the ignition key.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login