What did you use your Sak on today?
-
I used the scissors on my Spirit to cut a couple rogue hairs while shaving a couple weekends ago.
-
Blade and scissors get used several times a day in an office setting. Lots of boxes, packages and things to cut/open/etc. the blade is quite handy when cutting the plastic ribbon wrapped around a big box of printer paper.
And almost every week or month I use my SAK to cut open a package that I received in the mail that usually contains....another SAK. :ahhh
-
Forgot to post this one a week ago or so
Been using a work champ awl to mark the holes to be drilled

Spoiler:
Why would I need that?
Well I mentioned earlier here somewhere that I bought for me and my lady a Withings Sleep Analyzer - a really interesting piece of technology if you ask me.
The only downside to it is that it requires a solid surface under your mattress to function as intended. We have a slatted frame and the manual says it can be used, but you should place something on top of it to provide a solid surface. The manual suggested a piece of cardboard, but I had a few floor laminate planks left over and they seem to be of a perfect width, so only length should have been adjusted.So iPhone was used to take the approximate measures

And afterwards here come my Dremel friends


Everything works as intended so far and I’m really happy about our new gadgets [emoji736]
-
Nice, but please do not wear gloves when using a drill press or a Dremel. Please just don't.
-
@MadPlumbarian said:
Got some jerky, needed the sak to open them!
JRWhy?! Couldn't you just jerk it open?...

-
Day 14
110 is jealously watching a Work Champ is performing a kitchen scale maintenance.


Totally love the slim Phillips - as always - probably my most used and beloved tool on a Work Champ.
Disassembled, cleaned and ready to rock again [emoji41]
-
@MadPlumbarian said:
Or a lathe!
JRWhy would you wear a lathe when using a drill press

You're right of course

-
Well I guess it depends on the type/material

-
Working ungalvanised steel

-
@GearedForwards said:
Really? When I worked in a fabrication factory you were forced to were gloves when you did anything, including the drill press... So how close to a horrific injury was I?
None, as long as you kept your gloved hands away from the moving parts....
Now, me, I practically never wear gloves, unless it's for wamth, like when it's below freezing out. And it's rarely below freezing where I live now.
I go bear-handed all day long, and that includes changing chainsaw chains, sawmill blades, and handling barbed wire and blackberry bushes. I've just learned not to grab things where the sharp parts are. I find gloves very clunky and snagworthy, and they keep me from feeling my work. I don't have much strength in my hands (for my size and weight), and so I need to intelligently feel where I'm putting pressure on stuff, to keep from dropping it or having it slip out of my hands. Strangely my hands are not calloused, but it's for that same reason....I don't grip anything very tightly, only tightly enough to keep from dropping it.
-
Cut some branches with the Camper

-
About the glove thing and also sweaters and shirts, I remember when I started working me and a friend was using a drill press and this old fart comes over yelling at us and stopping the drill, young and foolish we just looked at him and wondered what his problem was. Then he told the story of him being young and like us.
This was a time before emergency stop buttons I might ad, but he did some work with a drill press over lunch and his glove got stuck in the drill and got a good take on his shirt making his arm go right in to the drill and chuck. He could not reach the stop button but had to scream for help and it took some time before his coworkers got to him. Then he showed us his scar going from the wrist up to the armpit where the chuck just spun around. Wasn't a pretty sight and we got the point.
I have NEVER had gloves or any fabric around rotating tools after that, I always pull me sleeves up no matter what I'm working on. This staid in my head really good and got an unpleasant remainder when a coworker got stuck like that a couple of years ago. He did pretty fine and just broke his arm.
[It's not failure if you learn something from it]
-
Exactly, Kottskrappa - same with long hair, ties etc - just don’t near spinning machine tools...
-
Haven't posted a pic for a while so here is mailcall, these are bottles for DIY noses pray. I prefer salt water instead for the ones you get at the store

[It's not failure if you learn something from it]
-
No pics but a fun use yesterday.
Needed to use a jack, howver the retaining pin that allowed us to pump the jack up had lost its small clip and kept falling out. This led to us all looking around for a small nail or screw that could be used just to get the job done. Nothing was found and this was a bit of an issue until I remebered that I had upgraded all my knives to plus scales and therefore had .... THE PEN. This fitted perfectly and allowed us to get the job done.
Another win for the climber!!

-
@nolongerlurking27 said:
No pics but a fun use yesterday.
Needed to use a jack, howver the retaining pin that allowed us to pump the jack up had lost its small clip and kept falling out. This led to us all looking around for a small nail or screw that could be used just to get the job done. Nothing was found and this was a bit of an issue until I remebered that I had upgraded all my knives to plus scales and therefore had .... THE PEN. This fitted perfectly and allowed us to get the job done.
Another win for the climber!!

:ahhh
Oh my. Not the pen. Could the toothpick have worked? (Whatever it takes to get you out of your pinch, I understand). So...did the pen bend or break in the process?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login