The Comprehensive Knife Based Multitool Thread
-
Some more pics, with a Midnite Manager for size comparison. The knife itself is not unconfortable to hold, despite its look. Doesn't really have any hotspots. I don't like it that much, more because of looks than of how if feels.
I have to say that, for me, the best thing about it is the water tight container it comes in.



-
Could have just waited a couple of seconds there

Seems to be a useful box for smaller stuff to keep dry in a backpack
Might have to look it up now
Sent fra min M2002J9G via Tapatalk
-
pfrsantos, I was thinking about buying one of those but I stopped myself because it looked gimmicky.
BUT I was wondering, have you had a chance to use the slotted driver on the flipper tab? That's the main thing that attracted me to it in the first place. Does it make it hard to flip open? Is it something you can actually use as a driver???

I was thinking about getting the black one because it has a bit driver instead of the strap cutter.

-
@King_Gorilla said:
pfrsantos, I was thinking about buying one of those but I stopped myself because it looked gimmicky.BUT I was wondering, have you had a chance to use the slotted driver on the flipper tab? That's the main thing that attracted me to it in the first place. Does it make it hard to flip open? Is it something you can actually use as a driver???

I was thinking about getting the black one because it has a bit driver instead of the strap cutter.

Well, it's not exactly a flip open knife. You can use the flipper to open the blade a little and then use the blade hole to fully open it.
I never actually used it. I took it out of the box right now and tried the screw driver on the flipper. You have to be careful. If you don't press down on the spine of the blade, it opens. If you manage to press down, it doesn't work too bad, but I'd be always worried about having the blade open and risk cutting myself, since you're making a turning movement.
It's dangerous in two ways: the point sticks out (with some of the blade tip) **and **your fingers can slide inside the cut on the scales, just under the belly of the blade! If you're pressing down on the back of the blade when this happens, it's very likely you'd cut yourself bad!
I prefer your version. Trading the carabiner for a pry bar/nail puller and the belt cutter for a bit holder seems like a great option.

-
@pfrsantos said:
Some more pics, with a Midnite Manager for size comparison. The knife itself is not unconfortable to hold, despite its look. Doesn't really have any hotspots. I don't like it that much, more because of looks than of how if feels.I have to say that, for me, the best thing about it is the water tight container it comes in.
I actually bought one of those new, to my somewhat chagrin. Not because it's bad, but because I buy very few things new, other than food, socks, underwear, gasoline, and a few other depletables like that. I carried that critter for a good while, and it is a handy size. The Kentucky wrench is awful, though, and the screw driver, so called, hardly has any screws it will fit into because it's too thick, and, the finish wore off REAL fast as I EDC'd it at the sawmilll, making its small ruler practically impossible to read, as if it were really that useful in the first place.
However, they're a good little frame lock carabiner type for EDC, for all that.
I did probably buy mine mainly for the container, too...
I do have at least one TU for sale used, but no container. I'm pretty easy on the pricing!
-
@Jim the Brave said:
I actually bought one of those new, to my somewhat chagrin. Not because it's bad, but because I buy very few things new, other than food, socks, underwear, gasoline, and a few other depletables like that. I carried that critter for a good while, and it is a handy size. The Kentucky wrench is awful, though, and the screw driver, so called, **hardly has any screws it will fit **into because it's too thick, and, the finish wore off REAL fast as I EDC'd it at the sawmilll, making its small ruler practically impossible to read, as if it were really that useful in the first place.However, they're a good little frame lock carabiner type for EDC, for all that.
I did probably buy mine mainly for the container, too...
I do have at least one TU for sale used, but no container. I'm pretty easy on the pricing!
That's a deal-breaker for me... I've been spoiled rotten with the Victorinox drivers...
there's a lot on this that I wouldn't use, The wrench that is shaped like Kentucky is chief among them.As I mentioned in another thread... I'm thinking that I may go with the Gerber Armbar Cut Slim...
OHO blade that is small enough for my liking, scissors, and an opener. The whole thing lacks a screwdriver... but I think there are enough flat parts on it to do the trick. -
I've never had one of the Gerber Armbars, but I do have a lot of the non SAK SAK's, including a Japanese one. I had one of the German ISC, but a member bought it from me a week or so ago.... they're almost a clone of the 91mm Victorinox, but not quite, and a fairly good copy/not clone, at that.
If I'd realized we would be doing this today, I would have kept back a couple ones I took over to the antique store today to put on consignment, incuding the Japanese one.
Now of course, there are the mass-market, low-life CAK's (China Army Knives) that are scarcely worth considering. I have about 20-30 of them and I'm getting ready to throw them all on eBay as a bulk buy. I also sold the hobo knife I recently won my badge with, and not sure if I have another, but I think I have one on the way in my next batch from Boulder City. I also know I have a few other interesting ones I just can't locate at the moment.
But here's what I did dig up today. None of these are particularly valuable.
The little red one is another type of CAK but it is not on the standard pattern you find with most of them. This one is also quite small. It looks refreshingly different from the other CAKs.
The greenish off-color one, I don't know how it was marketed, but it's an interesting one. Never seen another like it. It includes a ferro rod among other things.
The black one is like a high-end CAK. It has the characteristic scissors bump between the two openers, however, the layout is very different from the junk metal CAKs. It is much better built. Unlike the exposed battleship turret backside tools of the multi-million run standard CAK's, the backside tools on this tool open from the end and are recessed. It's much more of a classy chassis lassie than the regular tin-squid CAK's. I daresay the tools are an improvement over those sorry solidified molten drops of scrap metal, too. But still not the quality of a decent name-brand knife.
The carabiner knife actually has a name on it, Columbia, but whether that means anything much, I couldn't say. The hobo I just sold was the same brand. The carabiner (I have no idea how many pound test the frame is, for carrying purposes) has a knife blade, a wood saw, and combination nail file and bottle opener. I tried the wood saw out just now. It is clearly not the quality of a Victorinox, but it does cut wood, at least softer wood. Being so short, it makes it a bit awkward.
Anyway, there are higher dollar options out there too, from various companies, which I don't have.
Hope we found this interesting.


-
I do have to say I’m surprised to not see much if any mention of Swiza and Boker/Ruike?
I don’t have a Swiza, But I do have a Boker Tech Tool and Ruike

-
@Jim the Brave said:
The greenish off-color one, I don't know how it was marketed, but it's an interesting one. Never seen another like it. It includes a ferro rod among other things.I saw a review of this the other day. It looked quite interesting.
https://www.youtube.com/watch?v=5iqbdcQ9bas -
@ReamerPunch said:
I saw a review of this the other day. It looked quite interesting.
https://www.youtube.com/watch?v=5iqbdcQ9basWow, nice! The name was scraped off the side of this one, so I couldn't read it. Thought it was general advertising on a brandless knife....
-
I've been looking at the Leatherman K2 and T2. While I really like the concept, the ergonomics and tool selection are not optimal.
Again, they have 3 drivers... And that's the sort of thing that I'd want to avoid in a knife forwarded multitool.
In terms of the knife. The smaller one has the thumb hole too far from the pivot.
And overall the larger one is bigger than a full sized MT

Anyone have any thoughts or experience with these?
-
Not yet, 11. :(
-
So I did get this generic stainless rigger's knife. I understand the blade and the marlin spike, but what's the loop thing for?

-
@ElevenBlade said:
I've been looking at the Leatherman K2 and T2. While I really like the concept, the ergonomics and tool selection are not optimal.Again, they have 3 drivers... And that's the sort of thing that I'd want to avoid in a knife forwarded multitool. ...
Anyone have any thoughts or experience with these?I have a K4 and T4 and encounter screws of all different sizes. Therefore, having screwdriver blades in various sizes is a feature I value. YMMV.
-
@ElevenBlade said:
The loop thing may be for shacklesExactly. The loop is designed to help with opening/closing shackles.
Different knife, but so you get the idea

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login