What did you use your Sak on today?
-
@GearedForwards said:
Really? When I worked in a fabrication factory you were forced to were gloves when you did anything, including the drill press... So how close to a horrific injury was I?
None, as long as you kept your gloved hands away from the moving parts....
Now, me, I practically never wear gloves, unless it's for wamth, like when it's below freezing out. And it's rarely below freezing where I live now.
I go bear-handed all day long, and that includes changing chainsaw chains, sawmill blades, and handling barbed wire and blackberry bushes. I've just learned not to grab things where the sharp parts are. I find gloves very clunky and snagworthy, and they keep me from feeling my work. I don't have much strength in my hands (for my size and weight), and so I need to intelligently feel where I'm putting pressure on stuff, to keep from dropping it or having it slip out of my hands. Strangely my hands are not calloused, but it's for that same reason....I don't grip anything very tightly, only tightly enough to keep from dropping it.
-
Cut some branches with the Camper

-
About the glove thing and also sweaters and shirts, I remember when I started working me and a friend was using a drill press and this old fart comes over yelling at us and stopping the drill, young and foolish we just looked at him and wondered what his problem was. Then he told the story of him being young and like us.
This was a time before emergency stop buttons I might ad, but he did some work with a drill press over lunch and his glove got stuck in the drill and got a good take on his shirt making his arm go right in to the drill and chuck. He could not reach the stop button but had to scream for help and it took some time before his coworkers got to him. Then he showed us his scar going from the wrist up to the armpit where the chuck just spun around. Wasn't a pretty sight and we got the point.
I have NEVER had gloves or any fabric around rotating tools after that, I always pull me sleeves up no matter what I'm working on. This staid in my head really good and got an unpleasant remainder when a coworker got stuck like that a couple of years ago. He did pretty fine and just broke his arm.
[It's not failure if you learn something from it]
-
Exactly, Kottskrappa - same with long hair, ties etc - just don’t near spinning machine tools...
-
Haven't posted a pic for a while so here is mailcall, these are bottles for DIY noses pray. I prefer salt water instead for the ones you get at the store

[It's not failure if you learn something from it]
-
No pics but a fun use yesterday.
Needed to use a jack, howver the retaining pin that allowed us to pump the jack up had lost its small clip and kept falling out. This led to us all looking around for a small nail or screw that could be used just to get the job done. Nothing was found and this was a bit of an issue until I remebered that I had upgraded all my knives to plus scales and therefore had .... THE PEN. This fitted perfectly and allowed us to get the job done.
Another win for the climber!!

-
@nolongerlurking27 said:
No pics but a fun use yesterday.
Needed to use a jack, howver the retaining pin that allowed us to pump the jack up had lost its small clip and kept falling out. This led to us all looking around for a small nail or screw that could be used just to get the job done. Nothing was found and this was a bit of an issue until I remebered that I had upgraded all my knives to plus scales and therefore had .... THE PEN. This fitted perfectly and allowed us to get the job done.
Another win for the climber!!

:ahhh
Oh my. Not the pen. Could the toothpick have worked? (Whatever it takes to get you out of your pinch, I understand). So...did the pen bend or break in the process?
-
@Jim the Brave said:
:ahhhOh my. Not the pen. Could the toothpick have worked? (Whatever it takes to get you out of your pinch, I understand). So...did the pen bend or break in the process?
:D Not sure the tooth pic may have worked but I am quite junior on that team so figured I d play my best card first !! It actually didnt bend at all. Granted its use was to stop another part falling out and I don't think it actually had any weight on it but I am still calling it a win !!
-
Used my trusty Wenger Standard Issue 87 on my Stihl chainsaw. The locking flat head works wonders for the tune up. If you're familiar with the old Stuhls they kinda have to have a little gas dropped in them before getting going. But once going they are beasts. Mine is like 30+ years old I believe from some research. Cuts like a dream.


-
Cut some thread while repairing a seam.

-
I've been trying to repair my washing machine. The pump had to be removed, which meant an electrical block terminal had to be disconnected. I needed to depress a lock in a slot to separate them, and the Rambler's nail file was perfect for it.
-
@mrcgofga said:
Used my trusty Wenger Standard Issue 87 on my Stihl chainsaw. The locking flat head works wonders for the tune up. If you're familiar with the old Stuhls they kinda have to have a little gas dropped in them before getting going. But once going they are beasts. Mine is like 30+ years old I believe from some research. Cuts like a dream.They certainly don't make them like they used to!
-
Used the Camper's awl to start several pilot holes for hook and loop latches. Also used the cork screw as a lever to screw them in. As my nine month old twins are becoming more mobile they get into more things they shouldn't. Child-proofing never ends!

-

Excellent use!
-
Needed the sak to cut open all the straps, the box, plastic bags, zip ties, and the unique plastic/cardboard panel holding all the nuts, bolts, and washers.. worked great!
JR
-
Had to open a tube of kids toothpaste. The foil cover is impossible to grip or peel off, punctured it with the awl and it was then easy to peel away the foil.
-
I was hanging lights under my deck with tie wraps but the tie wraps would not fit through the holes on the mount. The Super Tinker awl came out and I made the holes bigger, problem solved.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login