Daredevil Challenge 2021
-
Daredevil Challenge August 2021
01 Comis
02 RF52
03 cody6268
04 Alan K.
05 Kev D
06 Etherealicer (if not busy fighting zombies)
07 ReamerPunch
08 SurgeUK
09 Poncho65
10 chip
11 Sos24
12 Echotech
13 Humayd A R Mahomedy
14 pipedreams
15 Barry Rowland -
I'm still leaning towards the LM OHT. I've tried to use it recently and still find it's main blades too short

I might use the True Utility POS tool I bought a few months ago (for the bit kit & light that came with it)

However, I'll see if I can get the current work issue Gerber (Suspension) so that might be a contender

It'll be an interesting challenge, one way or the other

-
@SurgeUk said:
I'm still leaning towards the LM OHT. I've tried to use it recently and still find it's main blades too short
I might use the True Utility POS tool I bought a few months ago (for the bit kit & light that came with it)

However, I'll see if I can get the current work issue Gerber (Suspension) so that might be a contender

It'll be an interesting challenge, one way or the other

What if they make you trade in the Surge for it

-
The Leatherman Rev occasionally eyeing me from the MT box, daring me to do this to myself. We'll see...

-
@ReamerPunch said:
I don't even remember which mt I hated the most...
BuckTool and Coast were my contenders for this.

I too still haven't really made up my mind just yet...sometimes I wonder whether I would actually 'hate' a tool per se, or my tool snobbishness gave me that bias towards less popular brand or no name brands. There is only one way to find out...
-
@Barry Rowland said:
Daredevil Challenge August 2021
01 Comis
02 RF52
03 cody6268
04 Alan K.
05 Kev D
06 Etherealicer (if not busy fighting zombies)
07 ReamerPunch
08 SurgeUK
09 Poncho65
10 chip
11 Sos24
12 Echotech
13 Humayd A R Mahomedy
14 pipedreams
15 Barry RowlandGreat to have you, Barry!

@SurgeUk said:
I'm still leaning towards the LM OHT. I've tried to use it recently and still find it's main blades too short
I might use the True Utility POS tool I bought a few months ago (for the bit kit & light that came with it)

However, I'll see if I can get the current work issue Gerber (Suspension) so that might be a contender

It'll be an interesting challenge, one way or the other

I have a feeling even just to choose a tool that you would actually 'hate' the most could be a challenge in itself. :D
@GearedForwards said:
The Leatherman Rev occasionally eyeing me from the MT box, daring me to do this to myself. We'll see...

-
@GearedForwards said:
What if they make you trade in the Surge for it
I've already considered that

Personal issue as part of a trial & therefore can't be reclaimed (that's my story and I'm sticking to it
)Moreover, most of our depts know SFA about the others ;) (UK Civil Service at it's best :D )
Or I'll just say I lost it

-
@SurgeUk said:
I've already considered that
Personal issue as part of a trial & therefore can't be reclaimed (that's my story and I'm sticking to it
)Moreover, most of our depts know SFA about the others ;) (UK Civil Service at it's best :D )
Or I'll just say I lost it

Ahh the perfect crime:
"I lost my tool, replacement?"
"Sure here's your Gerber"
2 months later cutting strapping with the Surge
"Ahem, didn't you lose that Surgeyboy?"
Of course if you ever need a place for it to hide out until the heat dies down ;)
-
@GearedForwards said:
Ahh the perfect crime:"I lost my tool, replacement?"
"Sure here's your Gerber"
2 months later cutting strapping with the Surge
"Ahem, didn't you lose that Surgeyboy?"
Of course if you ever need a place for it to hide out until the heat dies down ;)
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Could we use more than one tool we dislike? For instance I despise the Victorinox combo tool and the LM Micra. Could I pair up a Bantam and a Micra?
-
@pipedreams said:
Could we use more than one tool we dislike? For instance I despise the Victorinox combo tool and the LM Micra. Could I pair up a Bantam and a Micra?This wouldn't be about finagling a nice Vic blade on top of the Micra's now would it

-
@GearedForwards said:
This wouldn't be about finagling a nice Vic blade on top of the Micra's now would it
I don’t mind the Micra’s blade (or any of the other handle tools), it’s the scissors.
-
The Gerber fans won't like this, but I've never quite got along with my MP-600 or MP-400. They both have needle nose pliers that stick out of the tool so I can't just drop either of them in my pocket which is my preferred carry method. It will most likely be one of those getting the nod for this challenge.

-
@ReamerPunch said:
I may use it after all. The Coast Pocket Plier Paperweight seems so much better now. I kind of like it even. But the Flik, not so much. I will decide later on a tool, but the Flik is the number one contender as of now for me.That's right. I do have a multi-tool for this. The Gerber Flik. Which is perfect for this challenge.

-
@pipedreams said:
Could we use more than one tool we dislike? For instance I despise the Victorinox combo tool and the LM Micra. Could I pair up a Bantam and a Micra?Unfortunately, there's no rotation in this challenge, meaning we will choose one tool we dislike/hate/make peace with...from start to finish. >:D :D

-
@Alan K. said:
The Gerber fans won't like this, but I've never quite got along with my MP-600 or MP-400. They both have needle nose pliers that stick out of the tool so I can't just drop either of them in my pocket which is my preferred carry method. It will most likely be one of those getting the nod for this challenge.

I never got a chance to carry them, so I can't really tell whether I honestly dislike them, but I don't use the pliers much, so I'd imagine it would be a real hassle to slide the pliers out just in order to get to other tools.
@ReamerPunch said:
That's right. I do have a multi-tool for this. The Gerber Flik. Which is perfect for this challenge.
If I think MP400/600 is somewhat annoying, then Flik probably annoys more even more with those huge side buttons and funky blades. Hmmm...this could be a good candidate!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
