Which SAK is getting pocket time today?
-
@Jim the Brave said:
That wood saw works on plastic, too, btw. I used it to cut the tip off a funnel to make the opening bigger.Yep. I've used it to cut plastic pipes, water barrels, and a broken mudflap. When my boss got stuck in a plastic pallet after his foot went through it, the wood saw set him free. If you have it on you, the metal file tidies up the saw cut edges of hard plastics.
-
@Sawl Goodman said:
Yep. I've used it to cut plastic pipes, water barrels, and a broken mudflap. When my boss got stuck in a plastic pallet after his foot went through it, the wood saw set him free. If you have it on you, the metal file tidies up the saw cut edges of hard plastics.Yes, or if you don't have the metal file on your knife, the reamer punch sometimes works for that too. It certainly did with the funnel, because it was a round opening.
-
Classic SD in watch pocket.

-
Pioneer black.

-
Glad I picked one up when I did!

-
My Custom Compact, I've exchanged the corkscrew and hook for a Phillips and Awl.

-
@knifecoop said:
My Custom Compact, I've exchanged the corkscrew and hook for a Phillips and Awl.Sweet indeed. I'm about to try my hand at something similar.
Sent from the Far Reaches of the Southwest
-
Thought I would try out the Tinker Deluxe today. Executive has been riding my keys since I grabbed it months back.

Sent from the Far Reaches of the Southwest
-
Today was a bladeless Climber

-
-
This one always gets pocket time, the humble Escort, I use it most days and perfect for a keyring.

-
Still little Classic SD around work, can handle a lot!

-
My alox minichamp got put on the car keys, and my trusty Executive is back in my pocket. Going strong for around 6 years now, awesome little knife.
-

White scaled Spartan todaySent from my iPhone using Tapatalk
-
Spartan for Spartan Saturday

-
I’m back after a 4-month break
. A few changes in my life but all for the better.Trusty SC most days in my pocket. The whole SAK seized up after a day surf fishing when it got wet and I failed to rinse it with fresh water.
Seems the aluminum liners all picked up a little surface corrosion. But a good soak and lube released the tools and after a bit of work, they’re all butter-smooth again.Vic stainless tools of course survived the abuse with not a blemish. :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

