What do we have on the way?
-
@Mercury said:
I have an old, well loved PST from the early 90's coming my way. Belonged to my Grandfather who we lost two years ago to pancreatic cancer. My Grandmother just got around to clearing out a bunch of his stuff and found it; when my parents saw it they knew I'd love to have it. First new to me Multi in years, and I can't wait to hold it. The man had a huge influence on my kids and my life in general, especially in my adulthood, and I miss him dearly.Sounds like it was destined to come to you and what a great memento

-
Thanks guys, pics for sure once it arrives!
-
Two multitools on the complete opposite ends of the spectrum.
Schrade China (BTI/Stewart A. Taylor)~~ Hot Steaming Pile of Smurf~~ Tough Tool. This is nowhere near the USA-made models. Heck, it's no where near $20 tools like my Workpro and Ozark Trail 18-in-1s. Found a new one for close to $10. Needed it for the Daredevil Challenge. I wanted to prove how bad they were, so I chose to do the entire challenge with one. Had meant to get the version with scissors, but I wanted to be able to try it alongside the USA-made model for a more accurate comparison.

And, Victorinox SwissTool Spirit XC. Was tipped off over in the Swiss Army Knights section by Steve that since Vic was discontinuing this model, DLT Trading was clearing them about at $65 each. I specifically wanted the XC version so this worked out great.

Also, after accruing four Moore Maker folders, I have my first fixed blade on the way.
3100U 7" Drop Point Hunter by Utica. Said to be 7" OAL, but Utica had a similar knife in the Catskill line (albeit, with bone handles) that was 6 3/4" with a 2 3/4" 1095 blade. While there's nothing wrong with it, I got it for about $15 cheaper (and that included shipping, so more like $30 less once Moore Maker's stupid shipping costs are included) through Moore Maker's eBay arm that sells off those they consider imperfect. This is just enough knife for me. I don't need a big knife that hangs up on everything. I'm gonna make a Kydex sheath for those moments when I want to pocket carry it.
I"ve found I could've gotten a clearance-priced Utica-own brand version with bone handles for about $5 less than I paid for this one. It's the bigger 8 1/4" OAL version with bone handles--still has a 1095 blade.
-
Ordered a custom spydernox, its a few months out but I'm really looking forward to it.
Sent from my SM-G960F using Tapatalk
-
-

This stuff... -
Here you go Surge.
Thats not my one just a vid to show whats available.
Sent from my SM-G960F using Tapatalk
-
Ordered a Rahven High Impact Ceramics knife (Whale) after seeing this (+ they are a Swiss company):
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Not much. Still waiting for my Toler Union, and alsi got in on a GOAT Tool.
-
I've been in the process of buying a pro-grade RC for about a year now. I had several toy-grade, and a Kyosho Mini Z Overland Mitsubishi Pajero. The toy grade pieces don't hold up and rarely have proportional control. The Mini Z had been heavily modified by a prior owner, and parts were hard to get. The car I chose had to be compact (so Mini-Z scale), four-wheel drive (gravel drive is all I can drive on, and it's steep), and somewhat lifted though not monster-truck.Pretty much, I only had two decent options at that price. Kyosho had recently made a Mini Z 4x4 off-road chassis, Also, Axial had recently introduced their take, the SCX24 crawler. The Kyosho I felt was a bit higher quality, but was more expensive, fragile, and parts hard to find. US retailers don't stock a lot of parts, and they're often expensive. Japan-based dealers are cheaper, but shipping costs pretty much negate that. The Axial SCX-24 was about $80 cheaper, parts easy to get (pretty much any dealer associated with Horizon Hobby carries them), and more rugged, due to having a steel frame, steel driveshafts, easier to work on, and being sealed against dust and water. And full bearings from the factory, not bushings.
http://www.axialracing.com/products/axi00001t1

Stuff will get broken, stuff will get lost. Extra body clips and a "small parts set" with the screws. Should've ordered extra bumpers for the truck, since I know those will get cracked given how I drive. Also, wheel nuts.


Two extra batteries. Should've gotten the correct brand, but forgot. These came from eBay, but are an "off" brand.

-
Also, some items from Grainger. Had to order some hinges to fix a barn door since I couldn't find them locally, and then I went straight to my bucket list.
Proto J-100. My Fastenal would have had to special order it, resulting in extra costs.
They recently updated the classic design, and this one is more suited to a keychain pry tool. It's replacing my Nite Ize Doohickey.
Pelican StealthLite 2XAA. Made in USA, 120 lumens, lighter than a Maglite, but still strong enough. Wanted one of these for a long time. They used to largely be incandescent but were recently upgraded to LED.
MCR Safety BL1 safety glasses. I see no need in blowing huge bucks for sunglasses. I like these for cases when there's a good chance I'll lose or break them. Those Stihl have (specifically, those with a reflective coating) are good, and not too expensive either at sub-$20. These are like $1.50 each.
-
After like a week of research of trying to figure out what brand and what size of water bottle I want I finally went ahead and ordered a new one this morning! I went with the yeti 26oz, got the hotshot mouth, a silicone grip, and also a set of silicone molds so I can pour my iced tea in and place them in the freezer, this way when they melt the flavor stays the same rather then using ice and killing the taste! Of course went all nave blue :D
JR
-
Yankee Handyman 133H and a hodgepodge of assorted bits. Figure this is a good starter set for a tool that will be a user. While for extended work, I have a proper cordless drill set (Dewalt 18V driver, drill, reciprocating saw), for most stuff, I get along just fine with hand tools.
You know, it shocks me how expensive the danged bits are for these. I was wanting a purpose-built #2 Phillips bit, and those were almost as much as the $28 I have in this set! The cheapest I saw were $10.

-
Just ordered a LM Crunch (with leather pouch) from Hennie Haynes

Not a cheap thing, considering its limited tool choices but, in my defence, it was shiny
-
@SurgeUk said:
Just ordered a LM Crunch (with leather pouch) from Hennie Haynes
Not a cheap thing, considering its limited tool choices but, in my defence, it was shiny
You won't regret your purchase when you next need locking pliers (if you really need locking pliers nothing else will do). The Crunch is my favourite MT.
-
@gregozedobe said:
You won't regret your purchase when you next need locking pliers (if you really need locking pliers nothing else will do). The Crunch is my favourite MT.I had to get one at some point so, in a fit of cider, I clicked "pay now"

-
Also just ordered a Micra and a pouch for my Juice

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
