Wave Owners Club
-
I am sure I downloaded it back then but of course that has been long ago and at least a pc system ago :ahhh It would be on a portable hard drive of mine if anywhere
If I think I will look for it one evening this week 
-
Here is my Wave+ with some modifications: the flat screwdriver became an awl (as it's very useful to drill a starting hole and already have the double bit PH1-2/Flat) and the eyeglass bit holder removed to make room for a magnifying glass. Also there are some SAK tweezers under the woodsaw (which, by the way, exchanged the place with the file). Next mod is to build a t-shank holder similar to the one that comes with the Surge (and with that my Wave will be just right).


-
@Jothra said:
I was just reminding people about that today!- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Brilliant

-
Welcome to
naim 
Those are some good mods as well

-
Hi naim and welcome to

Cool mods on your Wave
-
It is Wave Wednesday today


-
Great pic, Ws

-
Thanks Poncho

It has been raining here all day and had to rush to take some pics before I got rain all over my camera :ahhh -

Two all time favorites and a new hobby. Hint, the hobby involves being outside...you decide which is which!Sent from my iPhone using Tapatalk
-
@naim said:
Here is my Wave+ with some modifications: the flat screwdriver became an awl (as it's very useful to drill a starting hole and already have the double bit PH1-2/Flat) and the eyeglass bit holder removed to make room for a magnifying glass. Also there are some SAK tweezers under the woodsaw (which, by the way, exchanged the place with the file). Next mod is to build a t-shank holder similar to the one that comes with the Surge (and with that my Wave will be just right).Nice mods and welcome !

-
Hello gents, i want to ask if the below issue has appeared to any of you. I have knowledge of 2 cases in Romania. Apparently, the plier was used, some force was needed and it cracked, making one handle to close with minimal force without opening the plier (loke in the case of sticking plier head)
Both are Wave +, and i do not know how much force was put on the handle
-
@Raoul Octav said:
Hello gents, i want to ask if the below issue has appeared to any of you. I have knowledge of 2 cases in Romania. Apparently, the plier was used, some force was needed and it cracked, making one handle to close with minimal force without opening the plier (loke in the case of sticking plier head)
Both are Wave +, and i do not know how much force was put on the handleI believe someone else here had a similar issue
but it was more than a year ago that it was reported I believe 
I have never experienced this and I hope I never do :ahhh It would be a warranty issue for sure but still sucks :-\
-
@Raoul Octav said:
Hello gents, i want to ask if the below issue has appeared to any of you. I have knowledge of 2 cases in Romania. Apparently, the plier was used, some force was needed and it cracked, making one handle to close with minimal force without opening the plier (loke in the case of sticking plier head)
Both are Wave +, and i do not know how much force was put on the handleIt seems the quality of the steel dropped a bit with these waves+. I got one that went rogue two days after purchase (brand new). It happend when I was opening the can opener tool just to make sure it moves smooth after oiling. I had it replaced by the seller on that very same day. Romania also.


-
I have only had that to happen on a couple of the LM Cores about 10 plus years ago :ahhh Never had a problem with any of the lock tabs on any of the other tools since
I hope it is just a random incident with that one but maybe not
:ahhh -
Raoul, Naim, I hope that Warranty Services do you good, as it is an excellent tool; I've heard of only one case of cracked pliers stop, and one from an ST300's lock so, I'm guessing (really want to think) it's just three flukes from a batch. Good luck!

-
My BO Wave+ helping out with afternoon libations.


-
@Poncho65 said:
I hope it is just a random incident with that one but maybe not
:ahhhThat's my hope also... I would say that the technical solution adopted by LM for these locking tabs is not the best one. Just for the sake of serviceability I would have chosen some kind of a pin to hold the tab (even a riveted one). There is always a trade off and I would have happily trade off the short longevity of a mild stainless pin for the ability to replace it myself in case of a failure. Anyway, I've already stressed the can opener tool on the replacement Wave+ just to make sure it holds on. So far so good. Cheers!
-
@Juan el Boricua said:
Raoul, Naim, I hope that Warranty Services do you good, as it is an excellent tool; I've heard of only one case of cracked pliers stop, and one from an ST300's lock so, I'm guessing (really want to think) it's just three flukes from a batch. Good luck!
@Juan: Indeed, the warranty service worked like a charm; as I said, that very day I had the faulty Wave replaced by the seller and got home with a new one (a silver-black one this time, as the seller had no more silver-only, and although it was not my favourite colour combination it was better than returning home with an empty hand and wait several days for the replacement from the country importer/distributer). This silver-black gave me a little hard time to "break-it-in" for achieving a smooth move because I had to dismantle it and use sandpaper on every tool and then brake cleaner and afterwards some ptfe wd40 to lube all the parts. Then I bought some threadlock (blue one) for pins but it will have to wait till the next mods are done (blade exchanger for saws and a chisel instead of serrated blade which will become a double bevel straight blade and will replace the original straight blade). For now I'm waiting for the 5.5 mm hss-cobalt drill bit to start the mods.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login