The Micro Toolbox - Need Recommendations
-
Thank you all for your recommendations, very helpful, keep them coming

@magentus said:
Not sure if a multi is an answer you're looking for but a Farmer X would take care of your awl, light pry bar, can opener, woodsaw, blade, assorted drivers and scissors in a frame smaller than the combined separate tools.I like the FX, but it is lacking screwdrivers. The large one is good as a light prybar, but that is about it. I personally do not like the can opener as a screwdriver. Just too weak

I am also looking for a better blade than 420. I really wish Vic would offer some SAKs with S30V or similar blades
The rest of the tools would be spot on though :D@Shuya said:
For a saw I would look for some T-Shank handles.You can then add all kinds of sawblades for quality and durability.
Do you have an example? This sounds like a good solution

@ReamerPunch said:
TOPS Pocket Survival Saw:Interesting, will have to checkout their stuff

@GearedForwards said:
For a file I'd just throw a small file from a set in there, the small files in my set are pretty carryable in a kit just pick the configuration you'd like (I'd go with a flat file with metal saw edge for versatility). Length wise my files go up to the very end of the nail nick on a n opened 91mm SAK.Light prybar, this really depends on what you want: something EDC/keychain size will be far better than a MT flat head, but you may want to go into small crow/wrecking bar territory depending on how heavy duty you want.
If you're going dedicated knife I'd go something faster to open or a small fixie personally too.
Pouch wize, the smallest Maxpedition organiser maybe?
I have some of those small metal files, but none have a saw edge
Do you have an example of small files that do have one?Good idea with the pouch, will scout their website :D
Don't want to add a faster blade or a fixed blade, it needs to stay legal to carry. Which means no fixed blade and no OHO + locking blade :-\
-
@SirVicaLot said:
I have some of those small metal files, but none have a saw edge
Do you have an example of small files that do have one?Good idea with the pouch, will scout their website :D
Don't want to add a faster blade or a fixed blade, it needs to stay legal to carry. Which means no fixed blade and no OHO + locking blade :-\
These are basically the small fiels from my set, but sold as their own set: https://www.amazon.co.uk/Rolson-24615-Needle-File-Set/dp/B001KOTNOY/ref=sr_1_5?dchild=1&keywords=rolson+file+set&qid=1620228452&sr=8-5
The flat file on the far right is the one I keep out and about for odd jobs, it's a capable file (last used to turn the inside edge of a SAK can opener into a blade), it has a saw surface on one sideand cuts pretty nicely (perhaps not as a aggressive as the one on MTs, but it's so much thinner it'll be cutting through less material anyway).
Oh sorry didn't realise you had legal restrictions, in which case the Proper sounds perfect for your situation

Pouch wise the micro seems like the size you want https://maxpedition.co.uk/products/micro-pocket-organizer
It'll fit in a pocket without too much trouble when full, their newer AGR serires may have something in that size but I think it'd be more bulky and those tend to have a sideways lay out on one side.
-
@magentus said:
Not sure if a multi is an answer you're looking for but a Farmer X would take care of your awl, light pry bar, can opener, woodsaw, blade, assorted drivers and scissors in a frame smaller than the combined separate tools.@Maxlvledc said:
THis..its hard to argue with how good the Farmer X is.The Farmer X was the first thought that came to my mind as well
- SAK scissors are hard to beat. I have never tried a pair of small folding scissors that worked better.
- Most small saws that would out perform the Farmer X will be significantly larger. Even a folding pocket saw would be a little big for pocket
- Adding P-51 and small pry bar become optional based on needs, but the Farmer X could handle most.
- Choosing Farmer X as base for scissors, saw, can opener and maybe small pry; allows more space for other tools that aren’t included in Farmer X and some redundancy.
-
Here's something I put together a couple of years ago. A little heavy, but it fits in a pocket.
Contents:
Left Side
Corkscrew for Spirit
Wenger Pocket Totlachest
Olight i3T flashlight
Extension from Bit Kit
PocketWrench II
Set of 1/4" Sockets on a 3" machine screw w/ wing nutRight Side:
Sears pry bar
Spirit Socket Set and Ratchet w/ 1/4" Hex to 1/4" square drive adapter
SwissTool Spirit.jpeg)
-
Very interesting thread

I also agree that the Silky Pocketboy is about as good of a small saw as you will find after stepping up from a MT or SAK sized saw

Also I wrote this out right after reply 15 and never pressed post
And I also agree that a Farmer X would be a great tool for a kit of this type 
Lot of good ideas in here

-
For the screwdriver, you could use the SwissTool Wrench and bit set. There are also lots of different handle styles for use with bits like one ones pictured below,


-
@GearedForwards said:
These are basically the small fiels from my set, but sold as their own set: https://www.amazon.co.uk/Rolson-24615-Needle-File-Set/dp/B001KOTNOY/ref=sr_1_5?dchild=1&keywords=rolson+file+set&qid=1620228452&sr=8-5The flat file on the far right is the one I keep out and about for odd jobs, it's a capable file (last used to turn the inside edge of a SAK can opener into a blade), it has a saw surface on one sideand cuts pretty nicely (perhaps not as a aggressive as the one on MTs, but it's so much thinner it'll be cutting through less material anyway).
Oh sorry didn't realise you had legal restrictions, in which case the Proper sounds perfect for your situation

Pouch wise the micro seems like the size you want https://maxpedition.co.uk/products/micro-pocket-organizer
It'll fit in a pocket without too much trouble when full, their newer AGR serires may have something in that size but I think it'd be more bulky and those tend to have a sideways lay out on one side.
Thx for the links, more stuff that I want...no, no, wait....I NEED it :D
-
@smiller43147 said:
Here's something I put together a couple of years ago. A little heavy, but it fits in a pocket.Contents:
Left Side
Corkscrew for Spirit
Wenger Pocket Totlachest
Olight i3T flashlight
Extension from Bit Kit
PocketWrench II
Set of 1/4" Sockets on a 3" machine screw w/ wing nutRight Side:
Sears pry bar
Spirit Socket Set and Ratchet w/ 1/4" Hex to 1/4" square drive adapter
SwissTool SpiritInteresting approach
Would still need to outsource the saws and file from the Spirit. Maybe the Pocketboy for those, and a PX for light pry bar, awl and scissors 
-
Let's see what we have so far:
Pliers - Knipex Cobra XS
Knife - Benchmade Proper
Awl - PX
Assorted screwdrivers - Victorinox Bit Wrench or similar small ratchet/wrench with bits
Scissors - PX
Wood Saw - Silky Pocketboy 130mm
Metal Saw - Silky Pocketboy 130mm
File - Needle File
Can Opener - PX
Light Pry Bar - PXCould leave the Proper behind as the PX has a blade. This looks like a small, but very capable tool box to me. What do you guys think?
While we are at it: Any recommendations on a good bit set? I have so many bits, but most of them are cheap chunk that came with a (good) tool. Never understood why tool companies add crappy bits to great tools

-
@SirVicaLot said:
Let's see what we have so far:Pliers - Knipex Cobra XS
Knife - Benchmade Proper
Awl - PX
Assorted screwdrivers - Victorinox Bit Wrench or similar small ratchet/wrench with bits
Scissors - PX
Wood Saw - Silky Pocketboy 130mm
Metal Saw - Silky Pocketboy 130mm
File - Needle File
Can Opener - PX
Light Pry Bar - PXCould leave the Proper behind as the PX has a blade. This looks like a small, but very capable tool box to me. What do you guys think?
Looks good to me

I'd just suggest some consumables to mix in:
Some zip ties (you can 'frame' the inside of Maxpedition pouches with them to keep them out of the way/get longer ones in)
Tube of superglue in a baggy
Few paperclips of different length (come on Mac)
An old gift card with Duct tape/Gorilla tape and electricians tape wrapped wound it
If you don't carry a lighter, a few matches w/strikepad, sometimes a bit of flame is needed to tidy/seal something and it's such a low weight/space costYou may want to consider a tailor's style tape measure, or alternatively a known length of your choice of cordage with the odd length marking sharpied on. Takes care of measuring to a certain degree and doubles as cordage as necessary.
-
@Shuya said:
Indeed, but depending on the package size he wants these handles and sawblades might be a bit long and builky.Problem is, that I only ever found one good t-shank holder and that one was a bit on the expensive side. To my knowledge, the only other one is from Donau Elektronik and it is terrible. There used to be one from Stanley, but it's no longer available.
On the other hand, there are various models for reciprocating saw blades available.
-
Does a smaller Knipex pliers wrench work into this rotation at all?
-
@SirVicaLot said:
Let's see what we have so far:Pliers - Knipex Cobra XS
Knife - Benchmade Proper
Awl - PX
Assorted screwdrivers - Victorinox Bit Wrench or similar small ratchet/wrench with bits
Scissors - PX
Wood Saw - Silky Pocketboy 130mm
Metal Saw - Silky Pocketboy 130mm
File - Needle File
Can Opener - PX
Light Pry Bar - PXDoes Silky sale a metal saw blade for the Pocketboy?
-
@Etherealicer said:
Problem is, that I only ever found one good t-shank holder and that one was a bit on the expensive side. To my knowledge, the only other one is from Donau Elektronik and it is terrible. There used to be one from Stanley, but it's no longer available.On the other hand, there are various models for reciprocating saw blades available.
The item in first link is exactly what i was looking for. Maybe i need someone have it 3D printed :D
-
-
@Poncho65 said:
I like the look of both of those
what is the brand of them or where did you get them :ahhh

I don’t own either, I’ve just seen them for sale. I know both are sold buy CountyComm, because that is where I got the pictures from. I’ve also seen the first one on Urban EDC Supply, Dark Sucks and I think on Etsy too.
-
Thanks Sos
I will have a look around then 
-
Crkt came out with a cool screwdriver recently as well

Hex Bit Driver Tool
The Hex Bit Driver Tool designed by Joe Wu is a part of his maintenance collection. The ball bearing spinner tucks neatly into the Hex Bit Driver Tool Roll.
Columbia River Knife and Tool (www.crkt.com)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login