SwissChamp XXL
-
@Altis said:
Finally a SAK with two parcel hooks.

Looks like it replaces the XAVT with traditional scales and a few extra tools. I wonder if it's so they can stop producing the electronic scales.
Those hooks should have been in opposite directions so you could grab/hold a string or wire from two sides, minimizing jump-out possibilities. Imagine using it to slide down a Kevlar string unwound from the spool hidden in your custom scale and tossed, grappling hook style, to make your getaway!
Edit: is there a badge for ideas that should have been presented via a sketch on the folded-paper-bag cover on a 10th grade geometry text book? Just checking.
-
@DavZell said:
Those hooks should have been in opposite directions so you could grab/hold a string or wire from two sides, minimizing jump-out possibilities. Imagine using it to slide down a Kevlar string unwound from the spool hidden in your custom scale and tossed, grappling hook style, to make your getaway!Edit: is there a badge for ideas that should have been presented via a sketch on the folded-paper-bag cover on a 10th grade geometry text book? Just checking.
These are advanced techniques :o
-
@Andetto said:
Their site says 73 functions. When you got 2 mp hooks, does that count as 2 functions? I understand that one comes with a nail file, but still 2 same hooks.
They could have just left that slot empty. IMO that is dishonest.Will there be a time when I need to use the hook, then I prefere the one with the file? I dont know.
Just checked again, 2 identical fine sd
.
I guess I wont be having this in my collection.
If a miracle happens and I got it as a gift, I will definitly modify it by removing those extras.It would have sound more right if they say 71 function.
I did a count of my XAVT some time back, removing the duplicates and got to 70. Taking off the digital scale features, I get to a grand total of 63 which is a more realistic tool count...#64 would be paperweight

- Toothpick
- Tweezers
- Pressurized Ballpoint Pen
- Stainless Steel Pin
- Reamer/Punch/Sewing Awl
- Can Opener (standard & combo tool)
- Screwdriver 3mm (on Can Opener)
- Bottle Opener (standard & combo tool)
- Wire Stripper (x2)
- Screwdriver 6mm (on Bottle Opener)
- Key Ring
- Universal Wrench M3/M4/M5*
- Inline Phillips Screwdriver 1/2
- Magnifying Glass
- Pliers
- Wire Cutter
- Wire Crimper
- Fish Scaler
- Hook Disgorger
- Ruler (cm/inches)
- Multipurpose Hook (x2)
- Small Nail file (on one Multipurpose Hook)
- Large Blade w/Serrated Edge
- Inline Reamer/Punch*
- Wood Saw
- Scissors
- Screwdriver 2.5mm (x2)
- Pruning Blade
- Electrician's Blade
- Wire Scraper
- Pharmaceutical Spatula
- Watch Opener*
- Screwdriver 5mm (on Combo Tool)
- Nail File
- Nail Cleaner
- Metal Saw
- Metal File
- Chisel 4mm
- Large Blade
- Small Blade
- Bit Slotted 3mm*
- Bit Slotted 4mm*
- Bit Torx 6*
- Bit Torx 8*
- Bit Hex 1,2*
- Bit Hex 1,5*
- Bit Hex 2*
- Bit Hex 2,5*
- Bit Slotted 4mm
- Phillips Bit 2
- Phillips Bit 0 (Pozidrive)
- Phillips Bit 1 (Pozidrive)
- Torx Bit 10
- Torx Bit 15
- Hex Bit 4
- Torx Bit 8
- Bit Case (x2)
- 4mm Bitwrench (x2)
- Female Hex drive 5mm for D-SUB Connectors (x2)
- Female Hex Drive 4mm for Bits (x2)
- LED
- Mini Screwdriver
- Corkscrew
*tools unique to the XAVT/XXL in the 91mm range
-
I’m usually all over big SAKs
Initially I was like, right, where do I buy! :
Then it occurred to me this will have the newer mag layer....I really dislike the new style acrylic mag layer. It find it looks cheap and flimsy. Much preferred the older grey version. Maybe Victorinox should have invested a little more thought in to it’s design and materials used.It looks like the first thing that would snap!

-
@tosh said:
I’m usually all over big SAKs
Initially I was like, right, where do I buy! :
Then it occurred to me this will have the newer mag layer....I really dislike the new style acrylic mag layer. It find it looks cheap and flimsy. Much preferred the older grey version. Maybe Victorinox should have invested a little more thought in to it’s design and materials used.It looks like the first thing that would snap!

Interesting read. I was under the impression you just hated those greedy sleazeballs at Victorinox and would never give them a dime after what they did to poor ol' Wenger.

-
@Simon_Templar said:
Interesting read. I was under the impression you just hated those greedy sleazeballs at Victorinox and would never give them a dime after what they did to poor ol' Wenger.
That too

I have the XLT, XAVT, XXLT, Workchamp XL
Plus the Wenger equivalentsI like big SAKs :D
But that new style mag layer is a abomination. It is what it looks.....cheap and nasty. Clearly it was a cost cutting measure. I own a couple of modern Explorers that have the newer mag layer and I HATE it, sorry. -
I gave away all my new mag SAKs...gray frame all the way now!!
-
I have to agree. Even had a lens fall out of one, but gave me an excuse to make this...now if only there was an easier way to get it onto the pivot... :D

-
That's even better Max! I wish Vic would have explored metal for the holder.
-
That looks so right for the job Max.
Hats off to you
-
Thanks Barry, tosh.

-
Two Hooks!?

-
XAVT: funny how? I mean, funny like I'm a 58mm clown pattern SAK? I amuse you? I make you laugh?

-
It was a bit of a mission to fabricate as I only have hand tools...so not economical to make. Could probably get a small run cut out of plate brass and build a batch of Yeoman/Explorer/SwissChamps, but I'm not really geared up for this at the moment. Will be a once-off I'm afraid.
-
@Max Stone said:
It was a bit of a mission to fabricate as I only have hand tools...so not economical to make. Could probably get a small run cut out of plate brass and build a batch of Yeoman/Explorer/SwissChamps, but I'm not really geared up for this at the moment. Will be a once-off I'm afraid.None the less it’s an amazing feat on your part. Your making a part that is ten times better than the factory that makes these knives for a living. They should take notice. Great job!
-
@Andetto said:
Their site says 73 functions. When you got 2 mp hooks, does that count as 2 functions? I understand that one comes with a nail file, but still 2 same hooks.
They could have just left that slot empty. IMO that is dishonest.Agreed - Vic have always been really creative counting the so called functions -
I'm not sure the keyring is a function - Although i guess it is ....... It's just that it's not a tool.I am also not sure on what planet they are when they call the XXL ***portable ***and practical.


-
Sure it is! Compared to a rollaway toolbox!!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login