Dutch Army Knives
-
I know, I know. These promotional Chinese made DAK items are not the most sexy and interesting stuff for the spoiled DAK collectors.
But last week I received a 'real deal', a genuine Leatherman Wave. It has the inscription of the "Schoolbataljon Centraal", which translates into 'School Battalion Central'. (You see, Dutch language is not complicated at all). Date stamp is 0205.
The Dutch Army had from 1994-2007 three schools where new recruits got their initial military trainings. These were the School Batallions North, Central and South. The Central one was based in a small town called Ermelo. These LM's probably were standard issue for the recruits of the Central school. -
cool find EMZ -

Two Victorinox cousins: the Centurion and the Nomad.
My two latest acquisitions. Both DAK93 and provided with the Dutch Interservice logo.
Both received from former military personnel and have both been "employed".
Nothing else to tell this time.
-
interesting to see a recent(ish) model army knife with a corkscrew -
I stumbled onto a KLU 65 in the back of a desk drawer we were tossing out. I don’t know anything about it. Is it a Dutch knife? It looks brand new, the writing is sideways across the casing though. Has anyone heard of this knife before? I’m an absolute newbie at this but I love this knife, it’s super high quality.

-
Congratulations with this very rare Dutch Army Knife!!
As far as I can see, it is in an excellent condition. Unfortunately the KLU 65 is not even in my own collection.
For you it is a marvellous start if you want to collect DAK's.
Welcome to the MTO club, and please enjoy our pictures and descriptions. -
@EMZ said:
Congratulations with this very rare Dutch Army Knife!!
As far as I can see, it is in an excellent condition. Unfortunately the KLU 65 is not even in my own collection.
For you it is a marvellous start if you want to collect DAK's.
Welcome to the MTO club, and please enjoy our pictures and descriptions.Do you know what the value of this would be? I’m not interested in selling it however I would like to start collecting these knives, should I stick with the fibre handled tools? I have no information on the value of the knives/tools and I don’t want to overpay. If I clean it will it damage the history of the knife? What is an ideal series for me to continue collecting in the line?
Any help would be appreciated,
Total newbie, super fascinated!
Regards,
Likewise

-
Anyone know what the tool opposite the knife blade does? Is it a can opener tool that broke off and got ground to what we see in the picture? Or is that something else?
-
No, it’s seen on a number of other klu65 knives. I’m not sure what the purpose is of that tool however in earlier posts I have seen the same tool. It’s very stout, thick and seems very heavy duty. There is an opener and a punch on the other side as well. I’m really interested in collecting them however there are none to be found in Canada that I have seen. Would you happen to know of any other sources for others in the klu series?
Likewise
-

It is a can opener
-

On September 19, 1931, Eugen Hollaender founded the Apeldoornsche Messenfabriek N.V. Haagse Import Mij. Olanda. This would later become Amefa. In the 1940s, this company also made and supplied pocket knives to the Wehrmacht. The owner E. Hollaender still had the German nationality and for that reason he could also close a deal with Germany. The knife was therefore also used in the German Wehrmacht. The knife has a red fibre handle and was made until WWII. The knife is not marked.
It probably served as an "example" for the Dutch knife that was made by Amefa after the war.
After World War II, the pocket knives came in the equipment of a Dutch soldier. It all started in the early 1950s when a Dutch company AMEFA (Apeldoornse Messen Fabriek) started producing pocket knives consisting of 4 parts.
The very first knife M1952 from Instalex (International Staalwaren Export Company), part of Amefa. Was issued in the mid 1950's. It is probably the first knife in the "new" Model 1952 series.The Amefa era lasted until the early 1980s when the Swiss company Victorinox started supplying the Dutch service knives. This still happens today.
In the 1950s the knives were only marked with KL without the addition of the year. It is not known how many knives have been put into circulation for Amefa.
In the early 1950s (before KL61), Amefa made knives where position of the bottle opener and the can opener were ‘swapped’ compared to the later models.
The Dutch army knives M1952 were made by AMEFA (Apeldoornse Messen Fabriek) - logo is on the ricasso, had a handle with brown fibre grip plates and a D-ring. These models were issued in limited numbers in the period 1950 - 1983. The first models only had the indication KL (Koninklijke Landmacht) on the handle and no year.The KL61 is the first knife with an annual listing. In 1962 there was no production. Production resumed in 1963 and 1965 with the KL (army) knife and also a KLU (air force) knife. No production took place in 1964.
No production took place in the years 1967, '68 and '69. The next issue was 1970 and was also the last.In 1971 there was no more production and the Model 1952 period was also ended.

.jpg)
.jpg)

-
Thank you so much for the information, that’s a tremendous amount of knowledge packed into a few paragraphs. It looks like you have a great collection, I’m experiencing envy for the first time in a few years. Thanks again, I really appreciate the response and all the information, it’s a great start for me to begin reading up on the tool development.
Regards,
Wayne
-
It is a can opener
Aggie, I trust you. So: how would one operate that sort of can opener? I can see pushing straight down, or pounding down to get a puncture, but then what?
-
Aggie, I trust you. So: how would one operate that sort of can opener? I can see pushing straight down, or pounding down to get a puncture, but then what?- end quote
I guess the greater question is why are they on the klu65 sets? Other photos show the same small stout blade.
Thoughts? I think the other person in the thread has photos of the same item with the same blade/tool, correct me if I’m wrong (I’m not, I checked them carefully.😉)
So ideally what would that be used for outside of a can opener?
Regards Wayne
-

It takes some "practice" to open a can with this can opener. We learned this during the basic training.
Push the opener (with a bang) through the top of the can. The protrusion is of course on the outside and lies with the straight side on the rim of the can. If you are right-handed, pull the pocket knife towards you and follow the edge of the can until you are completely "round". If you are left-handed, you push the knife away from you and follow the edge.
You "cut", as it were, with the "sharp" side of the knife through the tin using the protrusion as a lever.
-
Who knows something about these knives from FOSCO , KL95 ?


-

The KL95 from Fosco is the only knife from the M52 and M61 series that does not have a carrying eye. The quality of the Fosco knives was not up to par and were therefore not used for long. The biggest problem with these knives was consistency; all knives looked different. The back springs do not go all the way back when the knife was closed; the notches for the nail are not the same.
Very shortly after the issue, the contract was cancelled and the knives were taken back and destroyed. The knife was only issued in 1995.
There are two versions of the KL95 from Fosco: an aluminium (alox) version (1st version) and the stainless steel version (2nd version). The stainless steel Fosco KL 95 is a derivative of the US MIL-K-818-D.
It is not known to me whether this version was actually used by the armed forces
-
OK, many thanks for the explanation.

I found them last week on the market and bought 2 of them, it was the first time I saw them. You are right, the quality is very poor. -

The Fosco KL95 is rare - you don't see them much. They were so bad that they were even thrown away. So there are not many left.
Back to the can opener.
Indeed, it is not easy to open a can with this tool, but it was thought by "people" when we reposition the can opener, it may be easier. It turned out that the problem was not the location of the can opener, but the thing itself.
We went through the era of the brown Amefa knives and kept struggling to open the tins. (Perhaps the "Opening cans" lessons were dropped during basic training.)
But, when the era of these knives came to an end, it was thought that we could do with a knife without a can opener. So the next model (alox version) from Amefa made its appearance: A 3-part pocket knife, stainless steel with a ribbed aluminium body. Folding knife, bottle opener / wide flat screwdriver and flat awl. The can opener was supplied separately.
These things, after they were used, had to be kept in your pocket until you needed them again. And of course you would have lost the can opener. This "separate can opener" period lasted 3 years: 1972, 1973 and 1974 (incl. KLU74).
From 1975 the 2nd type was introduced, with 4 parts. These knives all had brass liners. The first two production years were 1975 and 1976. In 1977 no production took place. In the following years the KL78, KL79, KL80, KL81 and KL 82 were released.
.jpg)

.jpg)
-
Finally I found a KLU 63, made by Amefa.
In fact now only one is missing in my older type KL/KM/KLU collection: The KLu 74.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login