Leatherman Bond Owners Club
-
:ahhh
-
Awesome pics and walkthrough mate.
No doubt there is one of these in my near future. -
Thanks Gareth
It really is a really good and respectful PST replacement

-
That was a fantastic write up/comparison Poncho65.
I think I'll skip the Bond unless I see it at retail but it looks like it answers a lot of concerns with modern Leatherman that fans of the old school tools missed.
-
Thanks greg
It ticks a lot of boxes for people that love the old school tools for sure 
-
I actually tried scissors (from Wave/Charge/Blast/Fuse) and diamond file (from a PST II for those taking notes) in the Bond but after taking the lanyard out and adding the scissors I found it to bind the tool a bit and didn't make a great experience for me :ahhh I may try to reorder the tools a bit later and see if I can get it to work more to my liking but for now just the file is staying


After getting it apart I compared the 2 files to see what I had to take off with a Dremel
you can barely see it but the diamond file is under the Bond file 

The 2 side by side



Surprisingly I only had to cut a tiny bit off at the locking notch because the bigger cut out that is close to the pivot is only there because the Rebars locking tabs are in its way
The Bond has no such thing in the way and the file fit fairly well after just a tiny bit off the locking notch 

After getting it in though I noticed that the fingernail pull is on the wrong side
so I added one to the other side ;)
A bit of refinement in the locking notch and perhaps a little more time on the nail pull would make this much better but I will save that for another day because it works as is and I will perhaps try the refinements if I take it back apart for scissors in the future

-
Very nice work Poncho! I'll have to do some comparison shots with my PST, my Kick, and the Bond when I get mine.
-
Mine arrived today. I'll get the photos up tomorrow.
-
Thanks Waco

Can't wait for you both to get one in hand :ahhh

-
@Olives666 said:
Received mine today.......,modified within the first 10mins🙄.
So far I’m impressed.
Nice size and weight (between a Rebar and Pulse in size).
Suits my needs as a work EDC.
Don’t need scissors, as I have a style CS on my keys and I also carry a Raptor now and then.
I also have no need for an awl.
Pocket clip fitted(from old P2).
Awl and 3D Phillips removed.
Bit driver and micro screwdriver exchanger fitted. Plus fitted locking washers/shims between every tool.Topped it off with my old PST leather sheath(which fits perfectly with the clip fitted as well).
Does the bit holder need any modifications to fit the Bond?
-
Nice pics and write-up Poncho
I'm secretly hoping for a PST II update too. The files in them are just fantastic!!! Is the Bond easier on the hands when squeezing hard on the pliers?
Cheers, Pete
-
Thank you Poncho, that’s great to see. Good size and less splay. You just sold me on the Bond

-
Excellent comparison, Poncho!
What's the weight difference between the Bond and the Rebar? -
Can I just take my Rebars to a distributor so they can drill and tap them for pocket clips? ::)
-
Sigh. Got to wait patiently to get my copy in....got to wait patiently....just got to wait patiently...why am I failing at this?

-
Just reading this - thanks for the great write-ups Olives666 and Ponch

I think I'll order one soon. It so happens that I was preparing for some small future mods and had stocked up on pocket clips >:D
-
Thanks pieter, nitram, an0n and DT

I also hope that they make a refreshed PST II
I haven't really had a chance to test it yet, so I can't comment on the comfort of the handles but seeing that it only has one of the cut outs that the Rebar does, I would say it is a bit more comfortable than that 
@ReamerPunch said:
Can I just take my Rebars to a distributor so they can drill and tap them for pocket clips? ::)That would be great if they would do that :o who knows, if enough people email them and question them then you never know

@an0nemus said:
Excellent comparison, Poncho!
What's the weight difference between the Bond and the Rebar?I think Maxlvledc weighed them but I don't have anything to weigh the difference
I think the Bond is around 6oz maybe a little under and the Rebar is about 6.7oz.@Dutch_Tooler said:
Just reading this - thanks for the great write-ups Olives666 and Ponch
I think I'll order one soon. It so happens that I was preparing for some small future mods and had stocked up on pocket clips >:D

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

