The parts exchangeability thread
-
@Aloha said:
I had a Charge ALX with a broken plier head that's been sitting waiting for some work. I bought it broke with the intention of doing a few mods to it. Well yesterday I finally got around to removing the plier head and replacing it with a Kick plier head. Straight swap no issues. I now want to remove the can opener and add ????I'm not sure what else i'll do with it but for now just happy to finally swap the plier head. Pics later once I'm on my other computer.
Those broken pliers are great as a filler for the handles if u are into half tools. I just cut down 2 today and use them..

-
Great work, Aloha

And an awl would be great

Sam, what half tool do we here now

-
:o Very cool toolset :ahhh

-
Hey folks, so I understand that the Wave+ plier head will not fit in the kick frame due to the long tool, but could someone get me the thickness of the Wave+ head? I wonder if I could fit in there without any long tools.
-
I suppose I should say that my questioning mainly arises from this video, it is a black oxide tool so I would think if I saw any grinding on the head it would be visible? If anyone could shed some light on this witchcraft I would be appreciative. https://www.reddit.com/r/EDC/comments/gyo1mi/leatherman_kick_mod/
-
The OP of that video commented it is a rebar plier head so that should probably for

Sent fra min M2002J9G via Tapatalk
-
Howdy folks, Figured I'd add some more of my own measurements to this thread for anyone looking to mod
All Measurements are the thickness of the tool and are in millimeters measured by the pivot. These measurements are taken by a Vernier caliper so they may not be totally accurate but they are close.
Leatherman Kick/Fuse/Blast Tools:
Kick Head: 7.2
Knife: 1.8
Small flat driver: 2.6
Lanyard hole: .85
Blast file: 1.8Note on at least the Kick washers, they are #8 washers if you need to buy some extras.
PST Tools
Head: 7.15
Can opener: 2.35
Philips At pivot: 2.45
Philips at widest point: 4.75
Small Driver: 2.35
File: 1.9
Knife: 2.4
Awl: 2.4
Medium Driver: 2.4
Large Driver: 2.4Hope this helped someone!
-
Way to many to list!! Gerber in lm, lm in gerber, sak in all the above plus some. The interchangeability is solely dependent on how hard you try
and I have tired so many. -
Long shot, but has anybody compared the Xiaomi Nextool to any of the leatherman tools out there? They post a picture of the tool cuts, and it looks like they might be near the wave or surge, just can't tell how close.

-
Could someone please tell me the thickness (at the pivot) of the ST300's saw? I'm going to guess it's around 2.4mm...
-
Thanks Sam.

Since asking I realised that what I had in mind will not work, but the measurement might be useful for someone. -
I don't see why it won't fit, where did you hear that ?
-
I bought a few used tools recently and the bolts were stripped out. I drilled them out so I could access the tools for other builds. Does anyone have a source for replacement hardware? I would like to ultimately put these tools back together, I went to my local Ace Hardware this weekend and nothing was a direct fit. My Gerber tools appear to have a 3/16" inside diameter but they did not have anything that would work. Any help would be appreciated!
-
@Vjdotson said:
I bought a few used tools recently and the bolts were stripped out. I drilled them out so I could access the tools for other builds. Does anyone have a source for replacement hardware? I would like to ultimately put these tools back together, I went to my local Ace Hardware this weekend and nothing was a direct fit. My Gerber tools appear to have a 3/16" inside diameter but they did not have anything that would work. Any help would be appreciated!Maybe something there will work

Sent fra min M2002J9G via Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
