Show off your Sak mod's!
-
Thanks HB

-
Hello, i am a long lurker from germany. I did my first mod today, a minimalistic camper. Thought a long time about it and hoped that this will fit all my needs of being ready for every situation. But i am more an office than outdoor guy, so may i have to do another mod.


-
Great selection of tools for a two layer. Nice first mod....you’ll be addicted now...!
-
Cool mod!
[It's not failure if you learn something from it]
-
Victorinox Original Outdoorsman Plus Mod. So I got a Hoffritz Original Outdoorsman with a broken tip main blade cheap. Reshaped it into a sheepsfoot blade, but never really liked it and hated a weak opening layer due to a wimpy spring so I decided to mod it. Took a Victorinox weekender and basically split it and used main fully serrated blade with ground down spacer on one side and opening layer on the other side. Added Phillips and magnifier from previous project and kept the rest original. I really like the old school beefier scissors, file, and saw. Like the final product, great snap and everything fits like a glove.


-
Nice mod!
[It's not failure if you learn something from it]
-
Thanks, here is another one for you. Made a three layer version of the “TX tool crib mod” this evening. (See YouTube)
What do you guys think I should call it? It is a little different then the one Fit To Survive built or him. I kept the electrician blade and pruning blade in the same layer which required a little grinding, sanding, and polishing on the awl as a back tool. Also went with an old school blade, corkscrew, and hook with file. Came out alright.


-
@hsherzfeld said:
Behold...the Handy Explorer!
Victorinox Handyman with pliers replaced by Phillips screwdriver/magnifying glass layer from an Explorer. My first SAK mod!Behold the ExploreRanger! Oh, I mean Handy Explorer… Same toolset, different journey. My first proper mod too.

-
Got this one in the works.
Still waiting for the carbon fiber scales to arrive.
The liners will also be replaced by red G20 and carbon fiber.
Enviado do meu Redmi Note 9 Pro através do Tapatalk
-
@FInixNOver said:
Got this one in the works.
Still waiting for the carbon fiber scales to arrive.
The liners will also be replaced by red G20 and carbon fiber.
Enviado do meu Redmi Note 9 Pro através do Tapatalk
Hey! Good to see you back with us! Hope everything is ok with you and yours!

-
Thanks!
Everything is pretty much ok!
Just have been more active on Facebook, that's all.
Still keep an eye out in the forums, but usually end up not participating... [emoji17]
But, I'll be sure to share the end result once it's finished!Enviado do meu Redmi Note 9 Pro através do Tapatalk
-
@Helvetica Bold said:
Okay this kinda works for the pencil idea. Hollow brass tube which Accommodates a standard .7mm lead. I have created a recess that allows a silicone tube...the kind used for pole floats (fisherman)...to be slid on to the holder and a lead to slide through. With a small second sleeve over he lead it grips just enough to be usable. :0)About the best I can manage without nano engineering something although I may have a quick go at an additional brass sleeve to go over the silicon tube and clamp the lead a bit tighter still...
The silicon has the dual benefit of keeping the pencil
securely in the slot.What about adapting one of these? They are quite small in all dimensions.
I have used the ballpoint pen version for several years, that's excellent.
https://www.jetpens.com/Ohto-Minimo-Mechanical-Pencil-with-Holder-0.5-mm-Black/pd/23239?gclid=CjwKCAjwy42FBhB2EiwAJY0yQrubLjJ16ec-uue8ng5iScfP7dn9YPvLEtgdsqc1cXqXgoj5Bm9MdRoCXNcQAvD_BwE -
@neillcurrie said:
What about adapting one of these? They are quite small in all dimensions.
I have used the ballpoint pen version for several years, that's excellent.
https://www.jetpens.com/Ohto-Minimo-Mechanical-Pencil-with-Holder-0.5-mm-Black/pd/23239?gclid=CjwKCAjwy42FBhB2EiwAJY0yQrubLjJ16ec-uue8ng5iScfP7dn9YPvLEtgdsqc1cXqXgoj5Bm9MdRoCXNcQAvD_BwEWow! Those look great! Pretty cool to have as an EDC item.

-
@FInixNOver said:
Got this one in the works.
Still waiting for the carbon fiber scales to arrive.
The liners will also be replaced by red G20 and carbon fiber.
Enviado do meu Redmi Note 9 Pro através do Tapatalk
(G20?!
I, obviously meant G10 but, as usual, the auto correct got in the way! [emoji2959][emoji36])
Here it is! My custom Yeoman!
Carbon fiber scales and inner liners, red G10 outer liners.
I'm very happy with how it came out!
I can totally see it being my daily driver for a good while!!Enviado do meu Redmi Note 9 Pro através do Tapatalk









-
Great mod FInixNOver - love the red accents.

I did a basic 5-layer build today using a few spares I had left over. Calling it the Detective. An Explorer with pliers.
.jpeg)
.jpeg)

.jpeg)
-
Looks like it could be worth a look! I have a make shift solution but one that actually propels the lead would be much better....I’ll get some measurements and see if we can make it work.
-
@FInixNOver said:
(G20?!
I, obviously meant G10 but, as usual, the auto correct got in the way! [emoji2959][emoji36])
Here it is! My custom Yeoman!
Carbon fiber scales and inner liners, red G10 outer liners.
I'm very happy with how it came out!
I can totally see it being my daily driver for a good while!!Enviado do meu Redmi Note 9 Pro através do Tapatalk









Wow! It's just

How much cooller would it be with G20 liners!
:D :D
-
@pfrsantos said:
Wow! It's just

How much cooller would it be with G20 liners!
:D :D
Thanks Santos!
Is G20 even a thing?[emoji848] I'm guessing, at least, double the coolness! [emoji16]
Enviado do meu Redmi Note 9 Pro através do Tapatalk
-
@FInixNOver said:
(G20?!
I, obviously meant G10 but, as usual, the auto correct got in the way! [emoji2959][emoji36])
Here it is! My custom Yeoman!
Carbon fiber scales and inner liners, red G10 outer liners.
I'm very happy with how it came out!
I can totally see it being my daily driver for a good while!!Looking really great there with the colours and the peening. If I would dare suggest anything it would be to have the cross either cut through to show the red liner or to embed a bit of the same G10 in the cross to really make it stand out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
