Leatherman Bond Owners Club
-
My favourite LM since the Wave/Charge
Have to agree with Moneypenny..Mr Bond DoB 0221

-
I thought it was funny myself. :D
Nice photo SMLE.
-
Thank you all for sharing your experiences and pics of the Leatherman Bond

I really like what I see and am glad that the tool lock/retention works

This looks really good

Hard to resist the itch :D@badwolf said:
Interesting video on potential knife blade issue.
https://youtu.be/LjTmieKctIMThanks for sharing that video link badwolf.
That could happen to me as well.
I often push open the pliers like that.If Leatherman wants to re-use the tool inserts of the Rebar then a fix must be done on the handle.
I have two ideas for this...
- Reduce the cutout for the knife blade on the handle to minimize the possibility of a blade pushout. See what I mean?...

- Add a tiny bit of material to the fold-over area at the knife blade top end to create a little retention notch, like the Pulse had it...

What do you guys think?
-
That could do the trick..or maybe redesign the pivot point/locking notch on the blade to give it more retention. I have to wonder if Leatherman is going to do a recall on these, or fix the issue in future productions. I am just guessing here.
-
apologies in advance for my video on the blade issue. I was more than a little steamed after the consistent QC issues I have experienced from recent purchase as well as the response given to multiple costumers on Leatherman's end. I'm just getting fed up at this point.
-
@Chako said:
That could do the trick..or maybe redesign the pivot point/locking notch on the blade to give it more retention. I have to wonder if Leatherman is going to do a recall on these, or fix the issue in future productions. I am just guessing here.They absolutely need to address the safety issue of the blade IMO.
-

Looks like me and Poncho have the earliest date codes so far :D
-
@badwolf said:
Interesting video on potential knife blade issue.
https://youtu.be/LjTmieKctIMWow, I hadn't thought of that issue. :o As it happens being a leftie means that this really doesn't happen to me. Also I tend to use my ring finger "inside" the leg in a pushing motion (if that makes sense). However this is definitely a problem.
Personally I'd do away with the big cutaway in the handle altogether and move the nail nick to the inside.
Lowering the point of the blade would also fix this. So a spearpoint or a sheepsfoot for example.
-
How we got to the Bond. :D

-
-
-
Finally got a photo of mine.
Date codes are 1020 (handle with file)/ 0121 (handle with knife blade).

-
Great pic, cody
Congrats 
-
Seeing the clips on these made me want to have one as well :ahhh
So I robbed the one from my P2 :D
I took a LM flat bit of the appropriate size and with my Charge knife changed it over in all of 30 seconds
Pics later 
-
I just checked my black oxide rebar and it does the same thing, blade comes out a bit,and interestingly enough so does a fuse as well. Doubt I will ever skewer myself as sliding the hand down is backwards as I would slide hand up the handle but if it can happen it will. Probably a simple fix but by now they have probably made several thousands and no serial numbers to track them. No way the engineers or even the assembly crew didn't report this.
-
-
@stugumby said:
I just checked my black oxide rebar and it does the same thing, blade comes out a bit,and interestingly enough so does a fuse as well. Doubt I will ever skewer myself as sliding the hand down is backwards as I would slide hand up the handle but if it can happen it will. Probably a simple fix but by now they have probably made several thousands and no serial numbers to track them. No way the engineers or even the assembly crew didn't report this.Interesting. I tried with my Rebar but there was enough spring pressure on mine that even if I managed to push it out, it re-seated itself. I don't have a Fuse these days but I looked at my Kick and really couldn't find the knife blade by accident. Not the same blade on the Kick and the Fuse though.
-
Well, that blade issue certainly is something to be aware of when using it.
My Rebar does the same unfortunately, but that could very well be because it’s been taken apart and modded a bunch of times. It has put me in the habit of covering the blade a bit with a finger to prevent it popping out.
It’s not ideal but I can live with it. Maybe I’ll replace it with a sheepsfoot type from a Rebar for safety later on.After some days of carrying and using the Bond I must say it really is a great tool, I love it. No frills, just pure function and quality.

We have a three day weekend coming up, I look forward to doing some work around the house with Mister Bond

-
One cup of coffee and a dive into the parts drawer later and here we are:

For the record, the Rebar doesn’t open as far as the Bond does.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

that the blade coming out like that could be an issue :ahhh I just usually don't pay enough attention to something like that until it bites me
:D