New Style Magnifying Lens Issue
-
There is a hump so it’s plastic. Thanks!

-
I had a second hand Swisschamp (now modded into an Explorer/Yeoman without main blade) and the mag lens rattles but has not popped out.
I bought a second hand Explorer, and the lens in that will rotate but does not rattle.
These are both the clear plastic display, with, I believe, plastic lenses --- both have the same focal distance.

I went to the Victorinox store yesterday, and their display Swisschamp had a lens that did not rotate inside the housing --- it was very firm. Maybe they did something to the display copy?
Has anyone tried to replace their lens with something better quality?
-
@BePrepared said:
I went to the Victorinox store yesterday, and their display Swisschamp had a lens that did not rotate inside the housing --- it was very firm. Maybe they did something to the display copy?Perhaps Victorinox has now fixed the problem?

/post/2050636 -
@jph_777 said:
Here are some close-up photos of the magnifier. This is from an Explorer that I purchased online this year (2019), so I assume it is the most recent incarnation of the magnifier.If you look closely at the inside circumference of the frame of the magnifier, you can see alternating notches and tabs. On the opposite side of the magnifier frame, the notches are across from the tabs, and vice-versa.
The magnifier lens rotates within the frame, between the tabs on each side, when I hold the lens between my fingers and turn it gently.
I have two Explorers that are this type, and have had no issues with the lenses coming out.
Hope the photos are of some help in visualizing this vintage of magnifier.
Quite a simple design solution to prevent the glass popping out.
Victorinox! -
@jph_777 said:
Here are some close-up photos of the magnifier. This is from an Explorer that I purchased online this year (2019), so I assume it is the most recent incarnation of the magnifier.If you look closely at the inside circumference of the frame of the magnifier, you can see alternating notches and tabs. On the opposite side of the magnifier frame, the notches are across from the tabs, and vice-versa.
The magnifier lens rotates within the frame, between the tabs on each side, when I hold the lens between my fingers and turn it gently.
I have two Explorers that are this type, and have had no issues with the lenses coming out.
Hope the photos are of some help in visualizing this vintage of magnifier.
I believe all magnifiers with the new glass lens are of this type. My own Explorer's magnifier frame is identical and the lens would pop out. I have since acquired a used Swisschamp with the same frame. The lens rotates but has never popped out. Curiously, the lens has more optical distortion at the edge than the Explorer's.
I wonder how Victorinox has now addressed the issue? I'd like to see a new factory fresh build to see what they've done.
-
I hear they are making a version 4 of mag glass with the clear plastic molded around the glass so it doesnt come out.
-
Hi! Both the second gen and the third gen magnifying glass can be removed?
-
@Syph007 said:
I hear they are making a version 4 of mag glass with the clear plastic molded around the glass so it doesnt come out.This is now confirmed. Just got in 4 explorers and the lenses can't be removed now without ruining the polycarb holder. Instead of alternating tabs it has rings around both sides that hold it securely. Will add pics later when I'm out in the shop today.
-
Good to know they fixed the issue

-
Is the lens any better the Rev. 1? The gray one's lens was quite good.
Sent from my SM-G991U using Tapatalk
-
General opinion is that we all miss the grey one...and the longer Phillips.
-
I for one, prefer the "new" glass lens (version 3, if I'm not mistaken) over the one that came in the grey lens holder (version 1).
And I own 4 SAKs with the version 3 magnifying lens and none of them falls out of the holder (you do feel that the lens could be removed if you really wanted to).
-
@Max Stone said:
General opinion is that we all miss the grey one...and the longer Phillips.I have several older cheap, toy-grade RC cars in which that the old-style in-line Phillips (ala Marlboro Outdoorsman and my mid-'90s SwissChamp) can reach the deeply inset screw, but a modern one (i.e. my Champion and Explorer) can't. Need to pick up an older Explorer.
This is what annoys me, however. The current file is one of the best files on the market, but you can't get both the old mag lens and new file with older SAKs, aside from some rare transitional models.
-
@Top-Gear-24 said:
I for one, prefer the "new" glass lens (version 3, if I'm not mistaken) over the one that came in the grey lens holder (version 1).And I own 4 SAKs with the version 3 magnifying lens and none of them falls out of the holder (you do feel that the lens could be removed if you really wanted to).
What do you prefer about it?
Sent from my SM-G991U using Tapatalk
-
@Top-Gear-24 said:
I for one, prefer the "new" glass lens (version 3, if I'm not mistaken) over the one that came in the grey lens holder (version 1).I agree, the larger diameter and lower magnification means that the magnified area is wider and more "forgiving" in terms of pointing/focusing making the magnifier much more useable. My only gripe is that it's very difficult to distinguish from version 2 (molded plastic) on ebay pics.
-
@ComboTool said:
I agree, the larger diameter and lower magnification means that the magnified area is wider and more "forgiving" in terms of pointing/focusing making the magnifier much more useable. My only gripe is that it's very difficult to distinguish from version 2 (molded plastic) on ebay pics.I could not have eplained my preference for the version 3 lens any better than how you said it
.And I share your gripe about figuring out whether you're buying a plastic V2 lens or a glass V3 one. If the seller shows real pics of the tool I get it right about 90% of the time (using the method I explained earlier in this topic). But sometimes they use stock photo's, in which case I walk away...
Same problem when I'm buying from an online shop, most of the time they will keep using old pics while the tool has seen 3 "upgrades", and trying to explain the difference between the lenses to an online shop employee who has no idea what you're on about only makes you look like a crazy person... (been there ::)).
-
Work in progress.
I plan to make the mount a little shorter so I can use this paired with the longer Phillips. So basically the size of the grey magnifier but with the larger lens.

-
Just needs a polish and ready to epoxy into the frame.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
.